db/pgbackrest
1
0
Fork 0
mirror of https://github.com/pgbackrest/pgbackrest.git synced 2024-12-14 10:13:05 +02:00
Code Issues Releases Activity
1b3770e248
pgbackrest/test/expect/mock-archive-002.log

196 lines
27 KiB
Plaintext
Raw Normal View History

Create test matrix for mock/archive to increase coverage and reduce tests. The same test configurations are run on all four test VMs, which seems a real waste of resources. Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
2019-02-23 15:59:39 +02:00
run 002 - rmt 1, s3 1, enc 0
Repository encryption support. Contributed by Cynthia Shang.
2017-11-06 19:51:12 +02:00
============================
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
Consolidate archive-get test into new archive test.
2017-06-23 00:51:39 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: archive-push command begin [BACKREST-VERSION]: [[TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
Store base path for remote storage locally. It wasn't practical for the main process to be ignorant of the remote path, and in any case knowing the path makes debugging easier. Pull the remote path when connecting and pass the result of local storagePath() to the remote when making calls.
2019-11-17 00:12:16 +02:00
P00 ERROR: [055]: unable to load info file '/archive/db/archive.info' or '/archive/db/archive.info.copy':
The archive-push command is implemented entirely in C. This new implementation should behave exactly like the old Perl code with the exception of updated log messages. Remove as much of the Perl code as possible without breaking other commands.
2019-03-29 15:26:33 +02:00
FileMissingError: raised from remote-0 protocol on 'backup': unable to open '/archive/db/archive.info': No such file or directory
FileMissingError: raised from remote-0 protocol on 'backup': unable to open '/archive/db/archive.info.copy': No such file or directory
HINT: archive.info cannot be opened but is required to push/get WAL segments.
HINT: is archive_command configured correctly in postgresql.conf?
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
HINT: has a stanza-create been performed?
HINT: use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
P00 INFO: archive-push command end: aborted with exception [055]
Consolidate archive-get test into new archive test.
2017-06-23 00:51:39 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-get 000000010000000100000001 [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: archive-get command begin [BACKREST-VERSION]: [000000010000000100000001, [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
Store base path for remote storage locally. It wasn't practical for the main process to be ignorant of the remote path, and in any case knowing the path makes debugging easier. Pull the remote path when connecting and pass the result of local storagePath() to the remote when making calls.
2019-11-17 00:12:16 +02:00
P00 ERROR: [055]: unable to load info file '/archive/db/archive.info' or '/archive/db/archive.info.copy':
Cleanup local/remote protocol interaction from 9367cc46. The command option was not being set correctly when a remote was started from a local. It was being set as 'local' rather than the command that the local was running as. Also automatically select the remote protocol id based on whether it is started from a local (use the local protocol id) or from the main process (use 0). These were not live issues but could cause strange behaviors as new features are added that might be hard to diagnose.
2019-02-28 09:51:19 +02:00
FileMissingError: raised from remote-0 protocol on 'backup': unable to open '/archive/db/archive.info': No such file or directory
FileMissingError: raised from remote-0 protocol on 'backup': unable to open '/archive/db/archive.info.copy': No such file or directory
Migrate remote archive-get command to C. All required protocol commands are implemented so this is mostly a matter of enabling the feature and updating expect logs.
2019-02-20 22:57:18 +02:00
HINT: archive.info cannot be opened but is required to push/get WAL segments.
HINT: is archive_command configured correctly in postgresql.conf?
Consolidate archive-get test into new archive test.
2017-06-23 00:51:39 +02:00
HINT: has a stanza-create been performed?
HINT: use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
P00 INFO: archive-get command end: aborted with exception [055]
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
stanza-create db - stanza create (backup host)
The stanza-create/update/delete commands are implemented entirely in C. Contributed by Cynthia Shang.
2019-08-21 22:26:28 +02:00
> [CONTAINER-EXEC] backup [BACKREST-BIN] --config=[TEST_PATH]/backup/pgbackrest.conf --stanza=db --no-online stanza-create
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
------------------------------------------------------------------------------------------------------------------------------------
Remove pgbackrest test user. This user was created before we tested in containers to ensure isolation between the pg and repo hosts which were then just directories. The downside is that this resulted in a lot of sudos to set the pgbackrest user and to remove files which did not belong to the main test user. Containers provide isolation without needing separate users so we can now safely remove the pgbackrest user. This allows us to remove most sudos, except where they are explicitly needed in tests. While we're at it, remove the code that installed the Perl C library (which also required sudo) and simply add the build path to @INC instead.
2019-10-12 15:45:18 +02:00
P00 INFO: stanza-create command begin [BACKREST-VERSION]: --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/backup/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/backup/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/backup/log --log-subprocess --no-log-timestamp --no-online --pg1-host=db-master --pg1-host-cmd=[BACKREST-BIN] --pg1-host-config=[TEST_PATH]/db-master/pgbackrest.conf --pg1-host-user=[USER-1] --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-path=/ --repo1-s3-bucket=pgbackrest-dev --repo1-s3-endpoint=s3.amazonaws.com --repo1-s3-key=<redacted> --repo1-s3-key-secret=<redacted> --repo1-s3-region=us-east-1 --no-repo1-s3-verify-tls --repo1-type=s3 --stanza=db
Add Perl interface to C storage layer. Maintaining the storage layer/drivers in two languages is burdensome. Since the integration tests require the Perl storage layer/drivers we'll need them even after the core code is migrated to C. Create an interface layer so the Perl code can be removed and new storage drivers/features introduced without adding Perl equivalents. The goal is to move the integration tests to C so this interface will eventually be removed. That being the case, the interface was designed for maximum compatibility to ease the transition. The result looks a bit hacky but we'll improve it as needed until it can be retired.
2019-06-26 14:24:58 +02:00
P00 DETAIL: tls statistics:[TLS-STATISTICS]
P00 INFO: http statistics:[HTTP-STATISTICS]
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
P00 INFO: stanza-create command end: completed successfully
Create test matrix for mock/archive to increase coverage and reduce tests. The same test configurations are run on all four test VMs, which seems a real waste of resources. Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
2019-02-23 15:59:39 +02:00
+ supplemental file: /backup/db/backup.info
-------------------------------------------
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
[backrest]
backrest-format=5
backrest-version="[VERSION-1]"
[db]
db-catalog-version=201409291
db-control-version=942
db-id=1
Automate generation of WAL and pg_control test files. The existing static files would not work with 32-bit or big-endian systems so create functions to generate these files dynamically rather than creating a bunch of new static files.
2017-11-19 03:02:54 +02:00
db-system-id=1000000000000000094
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
db-version="9.4"
[db:history]
Automate generation of WAL and pg_control test files. The existing static files would not work with 32-bit or big-endian systems so create functions to generate these files dynamically rather than creating a bunch of new static files.
2017-11-19 03:02:54 +02:00
1={"db-catalog-version":201409291,"db-control-version":942,"db-system-id":1000000000000000094,"db-version":"9.4"}
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
Improve performance of info file load/save. Info files required three copies in memory to be loaded (the original string, an ini representation, and the final info object). Not only was this memory inefficient but the Ini object does sequential scans when searching for keys making large files very slow to load. This has not been an issue since archive.info and backup.info are very small, but it becomes a big deal when loading manifests with hundreds of thousands of files. Instead of holding copies of the data in memory, use a callback to deliver the ini data directly to the object when loading. Use a similar method for save to avoid having an intermediate copy. Save is a bit complex because sections/keys must be written in alpha order or older versions of pgBackRest will not calculate the correct checksum. Also move the load retry logic to helper functions rather than embedding it in the Info object. This allows for more flexibility in loading and ensures that stack traces will be available when developing unit tests. Reviewed by Cynthia Shang.
2019-09-06 19:48:28 +02:00
[backrest]
backrest-checksum="[CHECKSUM]"
Create test matrix for mock/archive to increase coverage and reduce tests. The same test configurations are run on all four test VMs, which seems a real waste of resources. Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
2019-02-23 15:59:39 +02:00
+ supplemental file: /archive/db/archive.info
---------------------------------------------
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
[backrest]
backrest-format=5
backrest-version="[VERSION-1]"
[db]
db-id=1
Automate generation of WAL and pg_control test files. The existing static files would not work with 32-bit or big-endian systems so create functions to generate these files dynamically rather than creating a bunch of new static files.
2017-11-19 03:02:54 +02:00
db-system-id=1000000000000000094
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
db-version="9.4"
[db:history]
Automate generation of WAL and pg_control test files. The existing static files would not work with 32-bit or big-endian systems so create functions to generate these files dynamically rather than creating a bunch of new static files.
2017-11-19 03:02:54 +02:00
1={"db-id":1000000000000000094,"db-version":"9.4"}
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
Improve performance of info file load/save. Info files required three copies in memory to be loaded (the original string, an ini representation, and the final info object). Not only was this memory inefficient but the Ini object does sequential scans when searching for keys making large files very slow to load. This has not been an issue since archive.info and backup.info are very small, but it becomes a big deal when loading manifests with hundreds of thousands of files. Instead of holding copies of the data in memory, use a callback to deliver the ini data directly to the object when loading. Use a similar method for save to avoid having an intermediate copy. Save is a bit complex because sections/keys must be written in alpha order or older versions of pgBackRest will not calculate the correct checksum. Also move the load retry logic to helper functions rather than embedding it in the Info object. This allows for more flexibility in loading and ensures that stack traces will be available when developing unit tests. Reviewed by Cynthia Shang.
2019-09-06 19:48:28 +02:00
[backrest]
backrest-checksum="[CHECKSUM]"
Create test matrix for mock/archive to increase coverage and reduce tests. The same test configurations are run on all four test VMs, which seems a real waste of resources. Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
2019-02-23 15:59:39 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push --cmd-ssh=/usr/bin/ssh --compress [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
------------------------------------------------------------------------------------------------------------------------------------
Reduce expect log level in mock/archive tests. The expect tests were originally a rough-and-ready type of unit test so monitoring changes in the expect log helped us detect changes in behavior. Now the archive code is heavily unit-tested so the detailed logs mainly cause churn and don't have any measurable benefit. Reduce the log level to DETAIL to make the logs less verbose and volatile, yet still check user-facing log messages.
2019-02-23 15:05:06 +02:00
P00 INFO: archive-push command begin [BACKREST-VERSION]: [[TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001] --cmd-ssh=/usr/bin/ssh --compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
The archive-push command is implemented entirely in C. This new implementation should behave exactly like the old Perl code with the exception of updated log messages. Remove as much of the Perl code as possible without breaking other commands.
2019-03-29 15:26:33 +02:00
P00 INFO: pushed WAL file '000000010000000100000001' to the archive
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
P00 INFO: archive-push command end: completed successfully
Consolidate archive-get test into new archive test.
2017-06-23 00:51:39 +02:00
Create test matrix for mock/archive to increase coverage and reduce tests. The same test configurations are run on all four test VMs, which seems a real waste of resources. Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
2019-02-23 15:59:39 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-get 700000007000000070000000 [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG
Fix incorrectly reported error return in info logging. A return code of 1 from the archive-get was being logged as an error message at info level but otherwise worked correctly. Also improve info messages when an archive segment is or is not found.
2018-09-05 03:46:41 +02:00
------------------------------------------------------------------------------------------------------------------------------------
Reduce expect log level in mock/archive tests. The expect tests were originally a rough-and-ready type of unit test so monitoring changes in the expect log helped us detect changes in behavior. Now the archive code is heavily unit-tested so the detailed logs mainly cause churn and don't have any measurable benefit. Reduce the log level to DETAIL to make the logs less verbose and volatile, yet still check user-facing log messages.
2019-02-23 15:05:06 +02:00
P00 INFO: archive-get command begin [BACKREST-VERSION]: [700000007000000070000000, [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
Make archive-get info messages consistent between C and Perl implementations. The info messages were spread around and logged differently based on the execution path and in some cases logged nothing at all. Temporarily track the async server status with a flag so that info messages are not output in the async process. The async process will be refactored as a separate command to be exec'd in a future commit.
2018-09-11 18:30:48 +02:00
P00 INFO: unable to find 700000007000000070000000 in the archive
Fix incorrectly reported error return in info logging. A return code of 1 from the archive-get was being logged as an error message at info level but otherwise worked correctly. Also improve info messages when an archive segment is or is not found.
2018-09-05 03:46:41 +02:00
P00 INFO: archive-get command end: completed successfully
Create test matrix for mock/archive to increase coverage and reduce tests. The same test configurations are run on all four test VMs, which seems a real waste of resources. Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
2019-02-23 15:59:39 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-get 000000010000000100000001 [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG
Consolidate archive-get test into new archive test.
2017-06-23 00:51:39 +02:00
------------------------------------------------------------------------------------------------------------------------------------
Reduce expect log level in mock/archive tests. The expect tests were originally a rough-and-ready type of unit test so monitoring changes in the expect log helped us detect changes in behavior. Now the archive code is heavily unit-tested so the detailed logs mainly cause churn and don't have any measurable benefit. Reduce the log level to DETAIL to make the logs less verbose and volatile, yet still check user-facing log messages.
2019-02-23 15:05:06 +02:00
P00 INFO: archive-get command begin [BACKREST-VERSION]: [000000010000000100000001, [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
Make archive-get info messages consistent between C and Perl implementations. The info messages were spread around and logged differently based on the execution path and in some cases logged nothing at all. Temporarily track the async server status with a flag so that info messages are not output in the async process. The async process will be refactored as a separate command to be exec'd in a future commit.
2018-09-11 18:30:48 +02:00
P00 INFO: found 000000010000000100000001 in the archive
Consolidate archive-get test into new archive test.
2017-06-23 00:51:39 +02:00
P00 INFO: archive-get command end: completed successfully
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push --compress --archive-async --process-max=2 [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: archive-push command begin [BACKREST-VERSION]: [[TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002] --archive-async --compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --process-max=2 --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --spool-path=[TEST_PATH]/db-master/spool --stanza=db
The archive-push command is implemented entirely in C. This new implementation should behave exactly like the old Perl code with the exception of updated log messages. Remove as much of the Perl code as possible without breaking other commands.
2019-03-29 15:26:33 +02:00
P00 INFO: pushed WAL file '000000010000000100000002' to the archive asynchronously
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
P00 INFO: archive-push command end: completed successfully
Add unimplemented S3 driver method required for archive-get. This was not being caught because the integration tests for S3 were running remotely and going through the Perl code rather than the new C code. Implement the exists method for the S3 driver and add tests to prevent a regression. Reported by mibiio.
2019-02-09 18:57:30 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push --archive-async [TEST_PATH]/db-master/db/base/pg_xlog/00000002.history
------------------------------------------------------------------------------------------------------------------------------------
P00 INFO: archive-push command begin [BACKREST-VERSION]: [[TEST_PATH]/db-master/db/base/pg_xlog/00000002.history] --archive-async --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --spool-path=[TEST_PATH]/db-master/spool --stanza=db
The archive-push command is implemented entirely in C. This new implementation should behave exactly like the old Perl code with the exception of updated log messages. Remove as much of the Perl code as possible without breaking other commands.
2019-03-29 15:26:33 +02:00
P00 INFO: pushed WAL file '00000002.history' to the archive asynchronously
Add unimplemented S3 driver method required for archive-get. This was not being caught because the integration tests for S3 were running remotely and going through the Perl code rather than the new C code. Implement the exists method for the S3 driver and add tests to prevent a regression. Reported by mibiio.
2019-02-09 18:57:30 +02:00
P00 INFO: archive-push command end: completed successfully
Fixed an issue retrieving WAL for old database versions. After a stanza-upgrade it should still be possible to restore backups from the previous version and perform recovery with archive-get. However, archive-get only checked the most recent db version/id and failed. Also clean up some issues when the same db version/id appears multiple times in the history. Fixed by Cynthia Shang. Reported by Clinton Adams.
2017-11-17 00:18:51 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-get 000000010000000100000001 [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: archive-get command begin [BACKREST-VERSION]: [000000010000000100000001, [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
Migrate remote archive-get command to C. All required protocol commands are implemented so this is mostly a matter of enabling the feature and updating expect logs.
2019-02-20 22:57:18 +02:00
P00 ERROR: [044]: unable to retrieve the archive id for database version '9.4' and system-id '1000000000000000094'
Update Archive::Info->archiveIdList() to return a valid error code instead of unknown.
2018-08-24 18:13:10 +02:00
P00 INFO: archive-get command end: aborted with exception [044]
Consolidate archive-get test into new archive test.
2017-06-23 00:51:39 +02:00
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: archive-push command begin [BACKREST-VERSION]: [[TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
The archive-push command is implemented entirely in C. This new implementation should behave exactly like the old Perl code with the exception of updated log messages. Remove as much of the Perl code as possible without breaking other commands.
2019-03-29 15:26:33 +02:00
P00 ERROR: [044]: PostgreSQL version 9.4, system-id 1000000000000000094 do not match stanza version 9.4, system-id 5000900090001855000
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
HINT: are you archiving to the correct stanza?
P00 INFO: archive-push command end: aborted with exception [044]
Consolidate archive-get test into new archive test.
2017-06-23 00:51:39 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-get 000000010000000100000001 [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: archive-get command begin [BACKREST-VERSION]: [000000010000000100000001, [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
Migrate remote archive-get command to C. All required protocol commands are implemented so this is mostly a matter of enabling the feature and updating expect logs.
2019-02-20 22:57:18 +02:00
P00 ERROR: [044]: unable to retrieve the archive id for database version '9.4' and system-id '1000000000000000094'
Update Archive::Info->archiveIdList() to return a valid error code instead of unknown.
2018-08-24 18:13:10 +02:00
P00 INFO: archive-get command end: aborted with exception [044]
Consolidate archive-get test into new archive test.
2017-06-23 00:51:39 +02:00
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
stop db stanza (db-master host)
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db stop
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: stop command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
P00 INFO: stop command end: completed successfully
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: archive-push command begin [BACKREST-VERSION]: [[TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
P00 ERROR: [062]: stop file exists for stanza db
P00 INFO: archive-push command end: aborted with exception [062]
Consolidate archive-get test into new archive test.
2017-06-23 00:51:39 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-get 000000010000000100000001 [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: archive-get command begin [BACKREST-VERSION]: [000000010000000100000001, [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
Consolidate archive-get test into new archive test.
2017-06-23 00:51:39 +02:00
P00 ERROR: [062]: stop file exists for stanza db
P00 INFO: archive-get command end: aborted with exception [062]
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
start db stanza (db-master host)
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db start
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: start command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
P00 INFO: start command end: completed successfully
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: archive-push command begin [BACKREST-VERSION]: [[TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
The archive-push command is implemented entirely in C. This new implementation should behave exactly like the old Perl code with the exception of updated log messages. Remove as much of the Perl code as possible without breaking other commands.
2019-03-29 15:26:33 +02:00
P00 WARN: WAL file '000000010000000100000002' already exists in the archive with the same checksum
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
HINT: this is valid in some recovery scenarios but may also indicate a problem.
The archive-push command is implemented entirely in C. This new implementation should behave exactly like the old Perl code with the exception of updated log messages. Remove as much of the Perl code as possible without breaking other commands.
2019-03-29 15:26:33 +02:00
P00 INFO: pushed WAL file '000000010000000100000002' to the archive
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
P00 INFO: archive-push command end: completed successfully
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: archive-push command begin [BACKREST-VERSION]: [[TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
The archive-push command is implemented entirely in C. This new implementation should behave exactly like the old Perl code with the exception of updated log messages. Remove as much of the Perl code as possible without breaking other commands.
2019-03-29 15:26:33 +02:00
P00 ERROR: [045]: WAL file '000000010000000100000002' already exists in the archive
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
P00 INFO: archive-push command end: aborted with exception [045]
Create test matrix for mock/archive to increase coverage and reduce tests. The same test configurations are run on all four test VMs, which seems a real waste of resources. Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
2019-02-23 15:59:39 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-get --cmd-ssh=/usr/bin/ssh --archive-async --archive-timeout=5 000000010000000100000002 [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG
Consolidate archive-get test into new archive test.
2017-06-23 00:51:39 +02:00
------------------------------------------------------------------------------------------------------------------------------------
Create test matrix for mock/archive to increase coverage and reduce tests. The same test configurations are run on all four test VMs, which seems a real waste of resources. Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
2019-02-23 15:59:39 +02:00
P00 INFO: archive-get command begin [BACKREST-VERSION]: [000000010000000100000002, [TEST_PATH]/db-master/db/base/pg_xlog/RECOVERYXLOG] --archive-async --archive-timeout=5 --cmd-ssh=/usr/bin/ssh --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --spool-path=[TEST_PATH]/db-master/spool --stanza=db
Make archive-get info messages consistent between C and Perl implementations. The info messages were spread around and logged differently based on the execution path and in some cases logged nothing at all. Temporarily track the async server status with a flag so that info messages are not output in the async process. The async process will be refactored as a separate command to be exec'd in a future commit.
2018-09-11 18:30:48 +02:00
P00 INFO: found 000000010000000100000002 in the archive
Consolidate archive-get test into new archive test.
2017-06-23 00:51:39 +02:00
P00 INFO: archive-get command end: completed successfully
Add unimplemented S3 driver method required for archive-get. This was not being caught because the integration tests for S3 were running remotely and going through the Perl code rather than the new C code. Implement the exists method for the S3 driver and add tests to prevent a regression. Reported by mibiio.
2019-02-09 18:57:30 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-get --archive-async 00000001.history [TEST_PATH]/db-master/db/base/pg_xlog/00000001.history
------------------------------------------------------------------------------------------------------------------------------------
P00 INFO: archive-get command begin [BACKREST-VERSION]: [00000001.history, [TEST_PATH]/db-master/db/base/pg_xlog/00000001.history] --archive-async --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --spool-path=[TEST_PATH]/db-master/spool --stanza=db
P00 INFO: unable to find 00000001.history in the archive
P00 INFO: archive-get command end: completed successfully
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-get --archive-async 00000002.history [TEST_PATH]/db-master/db/base/pg_xlog/00000002.history
------------------------------------------------------------------------------------------------------------------------------------
P00 INFO: archive-get command begin [BACKREST-VERSION]: [00000002.history, [TEST_PATH]/db-master/db/base/pg_xlog/00000002.history] --archive-async --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --spool-path=[TEST_PATH]/db-master/spool --stanza=db
P00 INFO: found 00000002.history in the archive
P00 INFO: archive-get command end: completed successfully
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002.partial
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: archive-push command begin [BACKREST-VERSION]: [[TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002.partial] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
The archive-push command is implemented entirely in C. This new implementation should behave exactly like the old Perl code with the exception of updated log messages. Remove as much of the Perl code as possible without breaking other commands.
2019-03-29 15:26:33 +02:00
P00 INFO: pushed WAL file '000000010000000100000002.partial' to the archive
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
P00 INFO: archive-push command end: completed successfully
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002.partial
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: archive-push command begin [BACKREST-VERSION]: [[TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002.partial] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
The archive-push command is implemented entirely in C. This new implementation should behave exactly like the old Perl code with the exception of updated log messages. Remove as much of the Perl code as possible without breaking other commands.
2019-03-29 15:26:33 +02:00
P00 WARN: WAL file '000000010000000100000002.partial' already exists in the archive with the same checksum
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
HINT: this is valid in some recovery scenarios but may also indicate a problem.
The archive-push command is implemented entirely in C. This new implementation should behave exactly like the old Perl code with the exception of updated log messages. Remove as much of the Perl code as possible without breaking other commands.
2019-03-29 15:26:33 +02:00
P00 INFO: pushed WAL file '000000010000000100000002.partial' to the archive
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
P00 INFO: archive-push command end: completed successfully
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002.partial
------------------------------------------------------------------------------------------------------------------------------------
Add log-subprocess option to allow file logging for local and remote subprocesses.
2018-08-23 02:05:49 +02:00
P00 INFO: archive-push command begin [BACKREST-VERSION]: [[TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002.partial] --no-compress --compress-level=3 --compress-level-network=1 --config=[TEST_PATH]/db-master/pgbackrest.conf --db-timeout=45 --lock-path=[TEST_PATH]/db-master/lock --log-level-console=detail --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/log --log-subprocess --no-log-timestamp --pg1-path=[TEST_PATH]/db-master/db/base --protocol-timeout=60 --repo1-host=backup --repo1-host-cmd=[BACKREST-BIN] --repo1-host-config=[TEST_PATH]/backup/pgbackrest.conf --repo1-host-user=[USER-1] --stanza=db
The archive-push command is implemented entirely in C. This new implementation should behave exactly like the old Perl code with the exception of updated log messages. Remove as much of the Perl code as possible without breaking other commands.
2019-03-29 15:26:33 +02:00
P00 ERROR: [045]: WAL file '000000010000000100000002.partial' already exists in the archive
Consolidate archive-push tests into new archive test.
2017-06-21 14:38:53 +02:00
P00 INFO: archive-push command end: aborted with exception [045]
Reference in New Issue Copy Permalink