1) Tests for all operating systems can now be run with a single command.
2) Tests can be run in parallel with --process-max.
3) Container generation now integrated into test.pl
4) Some basic test documentation.
* Fixed an issue where longer-running backups/restores would timeout when remote and threaded. Keepalives are now used to make sure the remote for the main process does not timeout while the thread remotes do all the work. The error message for timeouts was also improved to make debugging easier.
* Allow restores to be performed on a read-only repository by using --no-lock and --log-level-file=off. The --no-lock option can only be used with restores.
* Minor styling changes, clarifications and rewording in the user guide.
* The dev branch has been renamed to master and for the time being the master branch has renamed to release, though it will probably be removed at some point -- thus ends the gitflow experiment for pgBackRest. It is recommended that any forks get re-forked and clones get re-cloned.
Keepalives are now used to make sure the remote for the main process does not timeout while the thread remotes do all the work. The error messages for timeouts was also improved to make debugging easier.
1) Started on a general markdown renderer
2) Internal links now work in PDF
3) Improvements to PDF styling
4) Some comment and formatting fixes
5) User guide edits.
* Added documentation in the user guide for delta restores, expiration, dedicated backup hosts, starting and stopping pgBackRest, and replication.
* Fixed an issue where the start/stop commands required the --config option.
* Fixed an issue where log files were being overwritten instead of appended.
* Fixed an issue where backup-user was not optional.
* Symlinks are no longer created in backup directories in the repository. These symlinks could point virtually anywhere and potentially be dangerous. Symlinks are still recreated during a restore.
* Added better messaging for backup expiration. Full and differential backup expirations are logged on a single line along with a list of all dependent backups expired.
* Archive retention is automatically set to full backup retention if not explicitly configured.
* Better messaging for expiration.
* Fixed already stopped message.
* retention-archive and retention-archive-type now use retention-full and 'full' when not specified.
* Fixed issue where backup-user was required (should default to backrest).
* ExecuteTest now supports retries.
* Fixed issue where log test was not comparing test logs.
* Fixed issue where test logs would not match for ssh connection errors
* Added a new user guide that covers pgBackRest basics and some advanced topics including PITR. Much more to come, but it's a start.
* The website, markdown, and command-line help are now all generated from the same XML source.
* The backup_label.old and recovery.done files are now excluded from backups.
* Added new feature to allow all pgBackRest operations to be stopped or started using the stop and start commands. This prevents any pgBackRest processes from running on a system where PostgreSQL is shutdown or the system needs to be quiesced for some reason.
* Removed dependency on IO::String module.
* Fixed an issue where an error could be returned after a backup or restore completely successfully.
* Fixed an issue where a resume would fail if temp files were left in the root backup directory when the backup failed. This scenario was likely if the backup process got terminated during the copy phase.
* Experimental support for PostgreSQL 9.5 beta1. This may break when the control version or WAL magic changes in future versions but will be updated in each pgBackRest release to keep pace. All regression tests pass except for --target-resume tests (this functionality has changed in 9.5) and there is no testing yet for .partial WAL segments.
* Fixed an issue where resumed compressed backups were not preserving existing files.
* Fixed an issue where resume and incr/diff would not ensure that the prior backup had the same compression and hardlink settings.
* Fixed an issue where a cold backup using --no-start-stop could be started on a running PostgreSQL cluster without --force specified.
* Fixed an issue where a thread could be started even when none were requested.
* Fixed an issue where the pgBackRest version number was not being updated in backup.info and archive.info after an upgrade/downgrade.
* Fixed an issue where the info command was throwing an exception when the repository contained no stanzas. Reported by Stephen Frost.
* Fixed an issue where the PostgreSQL pg_stop_backup() NOTICEs were being output to stderr. Reported by Stephen Frost.
* Renamed recovery-setting option and section to recovery-option to be more consistent with pgBackRest naming conventions.
* Command-line help is now extracted from the same XML source that is used for the other documentation and includes much more detail.
* Code cleanup and refactoring to standardize on patterns that have evolved over time.
* Added dynamic module loading to speed up commands, especially asynchronous archiving.
* Expiration tests are now synthetic rather than based on actual backups. This will allow development of more advanced expiration features.
* Experimental support for PostgreSQL 9.5 alpha2. This may break when the control version or WAL magic changes in future versions but will be updated in each pgBackRest release to keep pace. All regression tests pass except for --target-resume tests (this functionality has changed in 9.5) and there is no testing yet for .partial WAL segments.
* Fixed an issue that caused the formatted timestamp for both the oldest and newest backups to be reported as the current time by the info command. Only text output was affected -- json output reported the correct epoch values. Reported by Michael Renner.
* Fixed protocol issue that was preventing ssh errors (especially on connection) from being logged.
* Now using Perl DBI and DBD::Pg for connections to PostgreSQL rather than psql. The cmd-psql and cmd-psql-option settings have been removed and replaced with db-port and db-socket-path.
* Add stop-auto option to allow failed backups to automatically be stopped when a new backup starts.
* Add db-timeout option to limit the amount of time pgBackRest will wait for pg_start_backup() and pg_stop_backup() to return.
* Remove pg_control file at the beginning of the restore and copy it back at the very end. This prevents the possibility that a partial restore can be started by PostgreSQL.
* The repository is now created and updated with consistent directory and file modes. By default umask is set to 0000 but this can be disabled with the neutral-umask setting.
* Added checks to be sure the db-path setting is consistent with db-port by comparing the data_directory as reported by the cluster against the db-path setting and the version as reported by the cluster against the value read from pg_control. The db-socket-path setting is checked to be sure it is an absolute path.
* Experimental support for PostgreSQL 9.5 alpha1. This may break when the control version or WAL magic changes in future versions but will be updated in each pgBackRest release to keep pace. All regression tests pass except for --target-resume tests (this functionality has changed in 9.5) and there is no testing yet for .partial WAL segments.
* Major refactoring of the protocol layer to support future development.
* Added vagrant test configurations for Ubuntu 14.04 and CentOS 7.
* Split most of README.md out into USERGUIDE.md and CHANGELOG.md because it was becoming unwieldy. Changed most references to "database" in the user guide to "database cluster" for clarity.
Most tests are working now. What's not working:
1) --target-resume option fails because pause_on_recovery setting was removed. Need to implement to the new 9.5 option and make that work with older versions in a consistent way.
2) No tests for the new .partial WAL segments that can be generated on timeline switch.
* Major refactoring of the protocol layer to support this work.
* Fixed protocol issue that was preventing ssh errors (especially connect) from being logged.
* Removed dependency on CPAN packages for multi-threaded operation. While it might not be a bad idea to update the threads and Thread::Queue packages, it is no longer necessary.
* Added vagrant test configurations for Ubuntu 12.04 and CentOS 6.
* Modified wait backoffs to use a Fibonacci sequence rather than geometric. This will make then grow less aggressively while still giving reasonable wait times.
* More options for regression tests and improved code to run in a variety of environments.
* Removed pg_backrest_remote and added the functionality to pg_backrest as remote command.
* Added file and directory syncs to the File object for additional safety during backup/restore and archiving. Suggested by Andres Freund.
* Support for Perl 5.10.1 and OpenSSH 5.3 which are default for CentOS/RHEL 6. Found by Eric Radman.
* Improved error message when backup is run without archive_command set and without --no-archive-check specified. Found by Eric Radman.
* Moved version number out of the VERSION file to Version.pm to better support packaging. Suggested by Michael Renner.
* Replaced IPC::System::Simple and Net::OpenSSH with IPC::Open3 to eliminate CPAN dependency for multiple distros.
Replaced IPC::System::Simple and Net::OpenSSH with IPC::Open3 to eliminate CPAN dependency for multiple distros. Using open3 will also be used for local processes so it make sense to switch now.
Also stopped replacing FORMAT number which explains the large number of test log changes. FORMAT should change very rarely and cause test log failures when it does.
* IMPORTANT NOTE: This flag day release breaks compatibility with older versions of PgBackRest. The manifest format, on-disk structure, and the binary names have all changed. You must create a new repository to hold backups for this version of PgBackRest and keep your older repository for a time in case you need to do a restore. The `pg_backrest.conf` file has not changed but you'll need to change any references to `pg_backrest.pl` in cron (or elsewhere) to `pg_backrest` (without the `.pl` extension).
* Add info command.
* More efficient file ordering for backup. Files are copied in descending size order so a single thread does not end up copying a large file at the end. This had already been implemented for restore.
* Logging now uses unbuffered output. This should make log files that are being written by multiple threads less chaotic. Suggested by Michael Renner.
* Experimental support for PostgreSQL 9.5. This may break when the control version or WAL magic changes but will be updated in each release.
* Includes updating the manifest to format 4. It turns out the manifest and .info files were not very good for providing information. A format update was required anyway so worked through the backlog of changes that would require a format change.
* Multiple database versions are now supported in the archive. Does't actually work yet but the structure should be good.
* Tests use more constants now that test logs can catch name regressions.
* Fixed an issue where archive-copy would fail on an incr/diff backup when hardlink=n. In this case the pg_xlog path does not already exist and must be created. Reported by Michael Renner
* Allow duplicate WAL segments to be archived when the checksum matches. This is necessary for some recovery scenarios.
* Allow comments/disabling in pg_backrest.conf using #. Suggested by Michael Renner.
* Better logging before pg_start_backup() to make it clear when the backup is waiting on a checkpoint. Suggested by Michael Renner.
* Various command behavior, help and logging fixes. Reported by Michael Renner.
* Fixed an issue in async archiving where archive-push was not properly returning 0 when archive-max-mb was reached and moved the async check after transfer to avoid having to remove the stop file twice. Also added unit tests for this case and improved error messages to make it clearer to the user what went wrong. Reported by Michael Renner.
* Fixed a locking issue that could allow multiple operations of the same type against a single stanza. This appeared to be benign in terms of data integrity but caused spurious errors while archiving and could lead to errors in backup/restore. Reported by Michael Renner.
* Replaced JSON module with JSON::PP which ships with core Perl.
ASSERTs still dump stack traces to the console and file in all cases. ERRORs only dump stack traces to the file when the file log level is DEBUG or TRACE.
* Better resume support. Resumed files are checked to be sure they have not been modified and the manifest is saved more often to preserve checksums as the backup progresses. More unit tests to verify each resume case.
* Resume is now optional. Use the `resume` setting or `--no-resume` from the command line to disable.
* More info messages during restore. Previously, most of the restore messages were debug level so not a lot was output in the log.
* Fixed an issue where an absolute path was not written into recovery.conf when the restore was run with a relative path.
* Added `tablespace` setting to allow tablespaces to be restored into the `pg_tblspc` path. This produces compact restores that are convenient for development, staging, etc. Currently these restores cannot be backed up as PgBackRest expects only links in the `pg_tblspc` path.
1) Re-checksums files that have checksums in the manifest
2) Recopies files that do not have a checksum
3) Saves the manifest at regular intervals to preserve checksums
4) Unit tests for all cases (that I can think of)
* Fixed a buffering error that could occur on large, highly-compressible files when copying to an uncompressed remote destination. The error was detected in the decompression code and resulted in a failed backup rather than corruption so it should not affect successful backups made with previous versions.
* Pushing duplicate WAL now generates an error. This worked before only if checksums were disabled.
* Database System IDs are used to make sure that all WAL in an archive matches up. This should help prevent misconfigurations that send WAL from multiple clusters to the same archive.
* Regression tests working back to PostgreSQL 8.3.
* Improved threading model by starting threads early and terminating them late.
* Added restore functionality.
* All options can now be set on the command-line making pg_backrest.conf optional.
* De/compression is now performed without threads and checksum/size is calculated in stream. That means file checksums are no longer optional.
* Added option `--no-start-stop` to allow backups when Postgres is shut down. If `postmaster.pid` is present then `--force` is required to make the backup run (though if Postgres is running an inconsistent backup will likely be created). This option was added primarily for the purpose of unit testing, but there may be applications in the real world as well.
* Fixed broken checksums and now they work with normal and resumed backups. Finally realized that checksums and checksum deltas should be functionally separated and this simplied a number of things. Issue #28 has been created for checksum deltas.
* Fixed an issue where a backup could be resumed from an aborted backup that didn't have the same type and prior backup.
* Removed dependency on Moose. It wasn't being used extensively and makes for longer startup times.
* Checksum for backup.manifest to detect corrupted/modified manifest.
* Link `latest` always points to the last backup. This has been added for convenience and to make restores simpler.
* More comprehensive unit tests in all areas.
