Bug Fixes:
* Fixed and issue that suppressed exceptions in PDF builds.
Features:
* Allow a source to be included as a section so large documents can be broken up.
* Added section link support to Markdown output.
* Added list support to PDF output.
* Added include option to explicitly build sources (complements the exclude option though both cannot be used in the same invocation).
* Added keyword-add option to add keywords without overriding the default keyword.
* Added debug option to doc.pl to easily add the debug keyword to documentation builds.
* Added pre option to doc.pl to easily add the pre keyword to documentation builds.
Refactoring:
* Improvements to markdown rendering.
* Remove code dependency on project variable, instead use title param.
Bug Fixes:
* Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
Bug Fixes:
* Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed.
* Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.)
Features:
* Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.)
Refactoring:
* Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
Bug Fixes:
* Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.)
* Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.)
* Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.)
* Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.)
Features:
* Non-exclusive backups will automatically be used on PostgreSQL 9.6.
* Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.)
* Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.)
* Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.)
* Check that archive_mode is enabled when archive-check option enabled.
Refactoring:
* Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.)
* pgBackRest version number included in command start INFO log output.
* Process ID logged for local process start/stop INFO log output.
Bug Fixes:
* Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.)
* Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.)
Refactoring:
* Cache file log output until the file is created to create a more complete log.
Bug Fixes:
* Fixed an issue where tablespaces were copied from the master during standby backup.
* Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.)
* Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.)
Features:
* Converted Perl threads to processes to improve compatibility and performance.
* Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup.
* The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n.
* Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.)
* Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace.
Refactoring:
* Refactor of protocol minions in preparation for the new local minion.
* Remove obsolete thread index variable from File() module.
* Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum.
* Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
Bug Fixes:
* Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.)
* Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.)
* Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.)
Features:
* Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master.
* More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used.
* Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done.
* Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace.
Refactoring:
* Simplify protocol creation and identifying which host is local/remote.
* Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__.
* Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling.
* Improve error message for links that reference links in manifest build.
* Added hints to error message when relative paths are detected in archive-push or archive-get.
* Improve backup log messages to indicate which host the files are being copied from.
Bug Fixes:
* Fixed an issue where tablespace paths that had $PGDATA as a substring would be identified as a subdirectories of $PGDATA even when they were not. Also hardened relative path checking a bit. (Reported by Chris Fort.)
Bug Fixes:
* Fixed an issue an where an extraneous remote was created causing threaded backup/restore to possibly timeout and/or throw a lock conflict. (Reported by Michael Vitale.)
* Fixed an issue where db-path was not required for the check command so an assert was raised when it was missing rather than a polite error message. (Reported by Michael Vitale.)
* Fixed check command to throw an error when database version/id does not match that of the archive. (Fixed by Cynthia Shang.)
* Fixed an issue where a remote could try to start its own remote when the backup-host option was not present in pgbackrest.conf on the database server. (Reported by Lardière Sébastien.)
* Fixed an issue where the contents of pg_xlog were being backed up if the directory was symlinked. This didn't cause any issues during restore but was a waste of space.
* Fixed an invalid log() call in lock routines.
Features:
* Experimental support for non-exclusive backups in PostgreSQL 9.6 beta3. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace.
Refactoring:
* Enhancements to the protocol layer for improved reliability and error handling.
* All remote types now take locks. The exceptions date to when the test harness and pgBackRest were running in the same VM and no longer apply.
* Exceptions are now passed back from threads as messages when possible rather than raised directly.
* Temp files created during backup are now placed in the same directory as the target file.
* Output lock file name when a lock cannot be acquired to aid in debugging.
* Reduce calls to protocolGet() in backup/restore.
* Suppress banners on SSH protocol connections.
* Improved remote error messages to identify the host where the error was raised.
Bug Fixes:
* Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.)
* Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.)
* Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled.
Features:
* Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.)
* Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds.
* Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout.
* Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace.
Refactoring:
* The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed.
* Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality.
* Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name.
* Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
* Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
Added an execution cache so that documentation can be generated without setting up the full container environment. This is useful for packaging, keeps the documentation consistent for a release, and speeds up generation when no changes are made in the execution list.
Release notes are now broken into sections so that bugs, features, and refactors are clearly delineated. An "Additional Notes" section has been added for changes to documentation and the test suite that do not affect the core code.
The change log was the last piece of documentation to be rendered in Markdown only. Wrote a converter so the document can be output by the standard renderers. The change log will now be located on the website and has been renamed to "Releases".
* Enhanced text output of `info` command to include timestamps, sizes, and the reference list for all backups. Contributed by Cynthia Shang.
* Allow selective restore of databases from a cluster backup. This feature can result in major space and time savings when only specific databases are restored. Unrestored databases will not be accessible but must be manually dropped before they will be removed from the shared catalogue.
* Experimental support for non-exclusive backups in PostgreSQL 9.6 beta1. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace.
* Fixed an issue where specifying --no-archive-check would throw a configuration error. Reported by Jason O'Donnell.
* Fixed an issue where a temp WAL file left over after a well-timed system crash could cause the next archive-push to fail.
* Fixed an issue where document generation failed because some OSs are not tolerant of having multiple installed versions of PostgreSQL. A separate VM is now created for each version. Also added a sleep after database starts during document generation to ensure the database is running before the next command runs. Reported by John Harvey.
* The retention-archive option can now be be safely set to less than backup retention (retention-full or retention-diff) without also specifying archive-copy=n. The WAL required to make the backups that fall outside of archive retention consistent will be preserved in the archive. However, in this case PITR will not be possible for the backups that fall outside of archive retention.
* When backing up and restoring tablespaces pgBackRest only operates on the subdirectory created for the version of PostgreSQL being run against. Since multiple versions can live in a tablespace (especially during a binary upgrade) this prevents too many files from being copied during a backup and other versions possibly being wiped out during a restore. This only applies to PostgreSQL >= 9.0 -- prior versions of PostgreSQL could not share a tablespace directory.
* Generate an error when archive-check=y but archivecommand does not execute pgbackrest. Contributed by Jason O'Donnell.
* Improved error message when repo-path or repo-remote-path does not exist.
* Added checks for --delta and --force restore options to ensure that the destination is a valid $PGDATA directory. pgBackRest will check for the presence of PGVERSION or backup.manifest (left over from an aborted restore). If neither file is found then --delta and --force will be disabled but the restore will proceed unless there are files in the $PGDATA directory (or any tablespace directories) in which case the operation will be aborted.
* When restore --set=latest (the default) the actual backup restored will be output to the log.
* Support for PostgreSQL 9.5 partial WAL segments and recoverytargetaction setting. The archivemode = 'always' setting is not yet supported.
* Support for recoverytarget = 'immediate' recovery setting introduced in PostgreSQL 9.4.
* The following tablespace checks have been added: paths or files in pgtblspc, relative links in pgtblspc, tablespaces in $PGDATA. All three will generate errors.
* Fixed an issue where longer-running backups/restores would timeout when remote and threaded. Keepalives are now used to make sure the remote for the main process does not timeout while the thread remotes do all the work. The error message for timeouts was also improved to make debugging easier.
* Allow restores to be performed on a read-only repository by using --no-lock and --log-level-file=off. The --no-lock option can only be used with restores.
* Minor styling changes, clarifications and rewording in the user guide.
* The dev branch has been renamed to master and for the time being the master branch has renamed to release, though it will probably be removed at some point -- thus ends the gitflow experiment for pgBackRest. It is recommended that any forks get re-forked and clones get re-cloned.
Most tests are working now. What's not working:
1) --target-resume option fails because pause_on_recovery setting was removed. Need to implement to the new 9.5 option and make that work with older versions in a consistent way.
2) No tests for the new .partial WAL segments that can be generated on timeline switch.
* Major refactoring of the protocol layer to support this work.
* Fixed protocol issue that was preventing ssh errors (especially connect) from being logged.
* Removed pg_backrest_remote and added the functionality to pg_backrest as remote command.
* Added file and directory syncs to the File object for additional safety during backup/restore and archiving. Suggested by Andres Freund.
* Support for Perl 5.10.1 and OpenSSH 5.3 which are default for CentOS/RHEL 6. Found by Eric Radman.
* Improved error message when backup is run without archive_command set and without --no-archive-check specified. Found by Eric Radman.
* Moved version number out of the VERSION file to Version.pm to better support packaging. Suggested by Michael Renner.
* Replaced IPC::System::Simple and Net::OpenSSH with IPC::Open3 to eliminate CPAN dependency for multiple distros.
Replaced IPC::System::Simple and Net::OpenSSH with IPC::Open3 to eliminate CPAN dependency for multiple distros. Using open3 will also be used for local processes so it make sense to switch now.
