Allows users to provide an executable to be used when pgbackrest generates command strings that expect to invoke pgbackrest. These generated commands are written to files by pgbackrest, e.g. recovery.conf.
The error handler used a loop to process try, catch, and finally blocks. This worked fine but static analysis tools like Coverity did not understand that the finally block would always run and so there were false positives about double-free, unfreed resource, etc.
This implementation removes the loop, which simplifies everything, and makes it clear that the finally block will always run. This cuts down on Coverity false positives.
This implementation also catches lack of coverage on empty catch blocks so a few test fixes were committed separately in d74fe7a.
A small refactor in backup.c is required because gcc 10.3.1 on Fedora 33 complains that the reason variable may be used uninitialized. It's not clear why this is the case, but reducing the scope of the TRY block fixes the issue.
Rather the converting String to StringIds at runtime, store defaults in StringId format in parse.auto.c and convert user input to StringId during parsing.
The compress-type, repo-type and log-level-* options have allow lists, which means it is more efficient to treat them as StringIds.
For compress-type and log-level-* also update the functions that convert them to enums.
The strIdFrom*() forced the caller to pick an encoding, which led to a number of TRY...CATCH blocks in the code. In practice the caller does not care which encoding is used as long as the string is valid for some encoding.
Update the strIdFrom*() function to try all possible encodings and only throw an error when the string is not valid for any of them.
Bug Fixes:
* Allow "global" as a stanza prefix. (Reviewed by Stefan Fercot. Reported by Younes Alhroub.)
* Fix segfault on invalid GCS key file. (Reviewed by Stephen Frost. Reported by Henrik Feldt.)
Improvements:
* Allow link-map option to create new links. (Reviewed by Don Seiler, Stefan Fercot, Chris Bandy. Suggested by Don Seiler.)
* Increase max index allowed for pg/repo options to 256. (Reviewed by Cynthia Shang.)
* Add WebIdentity authentication for AWS S3. (Reviewed by James Callahan, Reid Thompson, Benjamin Blattberg, Andrew L'Ecuyer.)
* Report backup file validation errors in backup.info. (Contributed by Stefan Fercot. Reviewed by David Steele.)
* Add recovery start time to online backup restore log. (Reviewed by Tom Swartz, Stefan Fercot. Suggested by Tom Swartz.)
* Report original error and retries on local job failure. (Reviewed by Stefan Fercot.)
* Rename page checksum error to error list in info text output. (Reviewed by Stefan Fercot.)
* Add hints to standby replay timeout message. (Reviewed by Cynthia Shang, Stefan Fercot. Suggested by Leigh Downs.)
The new rendering behavior is correct in normal cases, but for the pre-rendered HTML blocks in the command and configuration references it causes a lot of churn. This would be OK if the new HTML was diff-able, but it is not.
Go back to the old behavior of using br tags for this case to reduce churn until a more permanent solution is found.
Since CentOS 8 will be EOL at the end of the year it makes sense to do this now. The centos:8 image is still used in documentation.xml because changes there require manual testing, which will need to be done at a later date. The changes are not user-facing, however, and can be done at any time.
Also update CentOS references to RHEL since that is what we are emulating for testing purposes.
This is mostly to revert some comment changes in b11ab9f7 that will break the ppc64le patch, but at the same time keep the spelling consistent in all comments and documentation.
Also revert some space changes for the same reason.
Azurite released another breaking change (see fbd018cd, 096829b3, c38d6926, and Azurite issue 1039) so make adjustments as needed to documentation and tests.
Also remove some dead code that hid the repo-storage-host option and was made obsolete by all these changes.
Checking the return value is not terribly important here, but if setsockopt() fails it is likely that bind() will fail as well. May as well get it over with and this makes Coverity happy.
3879bc69 added this call and the parameters were not quite right but in way that the compiler decided they were OK. It was mostly working but TLS verification was disabled if caPath was NULL, which is not OK.
The variants were needed to easily serialize configurations for the Perl code.
Unions are more efficient and will allow us to add new types that are not supported by variants, e.g. StringId.
The text indicates to populate the pg-primary IP address into the pg_hba.conf file to allow replication connections. It should indicate to populate the pg-standby IP address
It is not uncommon for the S3/Azure emulators we use to introduce breaking changes without warning. If that happens the documentation can still be built by specifying a working version of the image. In general, it is better to let the version float so we know when things break.
Azurite has yet another breaking change coming up (see 096829b3, c38d6926, and Azurite issue 1039) so set azure-image at the current version until the breaking change has been released.
The TLS server is an alternative to using SSH for protocol connections to remote hosts.
This command is currently experimental and intended only for trial and testing. As such, the new commands and options will not show up in the command-line help unless directly requested.
On some platforms the output may contain UTF-8 characters that the latex code is not prepared to handle.
Showing the command is much more important than showing the output, so no big loss.
A stanza name like global_stanza was not allowed because the code was not selective enough about how a global section should be formatted.
Update the config parser to correctly recognize global sections.
Currently link-map only allows links that exist in the backup manifest to be remapped to a new destination.
Allow link-map to create a new link as long as a valid path/file from the backup is referenced.
The local process will retry jobs (e.g. backup file) but after a certain number of failures gives up. Previously, the last error was reported but generally the first error is far more valuable. The last error is likely to be a cascade failure such as the protocol being out of sync.
Report the first error (and stack trace) and append the retry errors to the first error without stack trace information.
Currently errors found during the backup are only available in text output when specifying --set.
Add a flag to backup.info that is available in both the text and json output when --set is not specified. This at least provides the basic info that an error was found in the cluster during the backup, though details are still only available as described above.
Valgrind complained about uninitialized values on arm64 when comparing the reset prefix, probably because "reset" ended up being larger than the option name: Conditional jump or move depends on uninitialised value(s) at cfgParseOption (parse.c:568).
Coverity complained because it could not verify the size of the string to be copied into optionName, probably because it does not understand the purpose of strSize(): You might overrun the 65-character fixed-size string "optionName" by copying the return value of "strZ" without checking the length.
Use strncpy() even though we have already checked the size and make sure the string is terminated. Keep the size check because searching for truncated option names is not a good idea.
This is not a production bug since the code has not been released yet.
"error list" makes it clearer that other errors may be reported. For example, if checksum-page is true in the manifest but no checksum-page-error list is provided then the error is in alignment, i.e. the file size is not a multiple of the page size, with allowances made for a valid-looking partial page at the end of the file.
It is still not possible to differentiate between alignment and page checksum errors in the output but this will be addressed in a future commit.
Azurite introduced a breaking change in 8f63964e to use automatically host-style URIs when the endpoint appears to be a multipart hostname.
This option allows the user to configure which style URI will be used, but changing the endpoint might cause breakage if Azurite decides to use a different style. Future changes to Azurite may also cause breakage.
Command-line help is now generated at build time so it does not need to be committed. This reduces churn on commits that add configuration and/or update the help.
Since churn is no longer an issue, help.auto.c is bzip2 compressed to save space in the binary.
The Perl config parser (Data.pm) has been moved to doc/lib since the Perl build path is no longer required.
Likewise doc/xml/reference.xml has been moved to src/build/help/help.xml since it is required at build time.
Linefeeds were originally used in the place of <p> tags to denote a paragraph. While much of the linefeed usage has been replaced over time, there were many places where it was still being used, especially in reference.xml. This made it difficult to get consistent formatting across different output types. In particular there were formatting issues in the command-line help because it is harder to audit than HTML or PDF.
Replace linefeed formatting with proper <p> tags to make formatting more consistent.
Remove double spaces in all text where <p> tags were added since it does not add churn.
Update all <ul>/<ol>/<li> tags to the more general <list>/<list-item> tags.
Add a few missing periods.
The primary benefit is that objects can allocate memory for their struct with the context, which saves an additional allocation and makes it easier to read context/allocation dumps. Also, the memory context does not need to be stored with the object since it can be determined using the object pointer.
Object pointers cannot be moved, so this means whatever additional memory is allocated cannot be resized. That makes the additional memory ideal for object structs, but not so much for allocating a list that might change size.
Mem contexts can no longer be reused since they will probably be the wrong size so their memory is freed on memContextFree(). This still means fewer allocations and frees overall.
Interfaces still need to be freed by mem context so the old objMove() and objFree() have been preserved as objMoveContext() and objFreeContext(). This will be addressed in a future commit.
The prior limitations were based on using getopt_long() to parse command-line options, which required a static list of allowed options. Setting index max too high bloated the binary unacceptably. 45a4e80 replaced the functionality of getopt_long() but the static list remained.
Improve cfgParseOption() to use available option data and remove the need for a static list. This also allows the option deprecations to be represented more compactly.
Index max is still capped at 256 because a large enough index could cause parseOptionIdxValue() to run out of memory since it allocates a static list based on the highest index found. If that function were improved with a map of found index values then index max could be set to UINT64_MAX.
Note that deprecations no longer set an index max or define whether reset is valid. These were space-saving measures which are no longer required. This means that indexed deprecated options will also be valid up to 256 and always allow reset, but it doesn't seem worth additional code to limit this behavior.
cfgParseOptionId() is no longer needed because calling cfgParseOption() with .ignoreMissingIndex = true duplicates the functionality of cfgParseOptionId(). This leads to some simplification in the help code.
