The purpose of the remote command is to get access to local resources, so a remote should never start another remote. However, this could happen if there were host settings on the remote host, which ended badly with lock errors, loops, etc.
Add pg-local and repo-local options to indicate that the resource is local even if there are host settings.
Note that for the time being these options are internal and not intended for general usage. However, this is likely the direction needed to allow for more symmetric and manageable configurations.
The prior default was determined by benchmarking the Perl code prior to the 1.0 release. In general buffer allocation was more expensive in Perl so large buffers gave the best performance. This was due to multiple buffer allocations for each filter in an IO operation.
The C code allocates fixed buffers for each IO operation so the cost for buffer allocation is lower than Perl. That being the case it made sense to benchmark the C code to determine the optimal buffer default.
The performance/storage tests were used to measure the performance of a variety of filters. 1GiB of data was processed by each filter 10 times and the results of the tests were averaged.
While most buffer sizes gave similar performance, 1MiB appeared to perform the best overall. Of course, different architectures are likely to yield different results but this seems like a sensible default. The buffer-size option may still need to be manually configured to give optimal results.
Raw test data for reference:
4MB buffer (prior default)
copy time 1807ms, avg time 180ms, avg throughput: 5942MB/s
md5 time 14200ms, avg time 1420ms, avg throughput: 756MB/s
sha1 time 11431ms, avg time 1143ms, avg throughput: 939MB/s
sha256 time 23463ms, avg time 2346ms, avg throughput: 457MB/s
gzip -6 time 381199ms, avg time 38119ms, avg throughput: 28MB/s
lz4 -1 time 15484ms, avg time 1548ms, avg throughput: 693MB/s
1MB buffer (new default)
copy time 1760ms, avg time 176ms, avg throughput: 6100MB/s
md5 time 13739ms, avg time 1373ms, avg throughput: 781MB/s
sha1 time 11025ms, avg time 1102ms, avg throughput: 973MB/s
sha256 time 22539ms, avg time 2253ms, avg throughput: 476MB/s
gzip -6 time 372995ms, avg time 37299ms, avg throughput: 28MB/s
lz4 -1 time 15118ms, avg time 1511ms, avg throughput: 710MB/s
512K buffer
copy time 1782ms, avg time 178ms, avg throughput: 6025MB/s
md5 time 13724ms, avg time 1372ms, avg throughput: 782MB/s
sha1 time 10959ms, avg time 1095ms, avg throughput: 979MB/s
sha256 time 22982ms, avg time 2298ms, avg throughput: 467MB/s
gzip -6 time 378120ms, avg time 37812ms, avg throughput: 28MB/s
lz4 -1 time 15484ms, avg time 1548ms, avg throughput: 693MB/s
256K buffer
copy time 1805ms, avg time 180ms, avg throughput: 5948MB/s
md5 time 13706ms, avg time 1370ms, avg throughput: 783MB/s
sha1 time 11074ms, avg time 1107ms, avg throughput: 969MB/s
sha256 time 22588ms, avg time 2258ms, avg throughput: 475MB/s
gzip -6 time 372645ms, avg time 37264ms, avg throughput: 28MB/s
lz4 -1 time 16346ms, avg time 1634ms, avg throughput: 656MB/s
The --repo-retention-full-type option allows retention of full backups based on a time period, specified in days.
The new option will default to 'count' and therefore will not affect current installations. Setting repo-retention-full-type to 'time' will allow the user to use a time period, in days, to indicate full backup retention. Using this method, a full backup can be expired only if the time the backup completed is older than the number of days set with repo-retention-full (calculated from the moment the 'expire' command is run) and at least one full backup meets the retention period. If archive retention has not been configured, then the default settings will expire archives that are prior to the oldest retained full backup. For example, if there are three full backups ending in times that are 25 days old (F1), 20 days old (F2) and 10 days old (F3), then if the full retention period is 15 days, then only F1 will be expired; F2 will be retained because F1 is not at least 15 days old.
bzip2 is a widely available, high-quality data compressor. It typically compresses files to within 10% to 15% of the best available techniques (the PPM family of statistical compressors), while being around twice as fast at compression and six times faster at decompression.
bzip2 is currently available on all supported platforms.
Zstandard is a fast lossless compression algorithm targeting real-time compression scenarios at zlib-level and better compression ratios. It's backed by a very fast entropy stage, provided by Huff0 and FSE library.
Zstandard version >= 1.0 is required, which is generally only available on newer distributions.
The specified backup set (i.e. the backup label provided and all of its dependent backups, if any) will be expired regardless of backup retention rules except that at least one full backup must remain in the repository.
Timeout used for connections and read/write operations.
Note that the entire read/write operation does not need to complete within this timeout but some progress must be made, even if it is only a single byte.
These were once used heavily in the Perl code but now only a few of them are used in the documentation.
Remove the unused exports as there is generally no need create them for new commands/options.
This is really a socket option so the new name is clearer.
Since common/io/socket/tcp will contains a mix of options it makes sense to rename it to socket and cascade name changes as needed.
Prior to 2.25 the individual TCP keep-alive options were not being configured due to a missing header. In 2.25 they were being configured incorrectly due to a disconnect between the timeout specified in ms and what was expected by the TCP options, i.e. seconds.
Instead make the TCP keep-alive options directly configurable, with correct units and better testing. Keep-alive is enabled by default (though it can be defaulted to the system setting instead) and the rest of the options are not set by default. This is in line with what PostgreSQL does, though PostgreSQL does not allow keep-alive to be defaulted.
Also move configuration of TCP options before connect() as PostgreSQL does.
The primary source for project info is now src/version.h.
The pgBackRestDoc::ProjectInfo module loads the project info from src/version.h at runtime so there is no need to update it.
This is consistent with the way BackRest and BackRest test were renamed way back in 18fd2523.
More modules will be moving to pgBackRestDoc soon so renaming now reduces churn later.
This directory was once the home of the production Perl code but since f0ef73db this is no longer true.
Move the modules to test in most cases, except where the module is expected to be useful for the doc engine beyond the expected lifetime of the Perl test code (about a year if all goes well).
The exception is pgBackRest::Version which requires more work to migrate since it is used to track pgBackRest versions.
LZ4 compresses data faster than gzip but at a lower ratio. This can be a good tradeoff in certain scenarios.
Note that setting compress-type=lz4 will make new backups and archive incompatible (unrestorable) with prior versions of pgBackRest.
These commands are generally useful but more importantly they allow removing LibC by providing the Perl integration tests an alternate way to work with repository storage.
All the commands are currently internal only and should not be used on production repositories.
This command only makes sense for the repository storage since other storage (e.g. pg and spool) must be located on a local Posix filesystem and can be listed using standard unix commands. Since the repo storage can be located lots of places having a common way to list it makes sense.
Prefix with repo- to make the scope of this command clear.
Update documentation to reflect this change.
Add compress-type option and deprecate compress option. Since the compress option is boolean it won't work with multiple compression types. Add logic to cfgLoadUpdateOption() to update compress-type if it is not set directly. The compress option should no longer be referenced outside the cfgLoadUpdateOption() function.
Add common/compress/helper module to contain interface functions that work with multiple compression types. Code outside this module should no longer call specific compression drivers, though it may be OK to reference a specific compression type using the new interface (e.g., saving backup history files in gz format).
Unit tests only test compression using the gz format because other formats may not be available in all builds. It is the job of integration tests to exercise all compression types.
Additional compression types will be added in future commits.
These commands (e.g. restore, archive-get) never used the compress options but allowed them to be passed on the command line. Now they will error when these options are passed on the command line. If these errors occur then remove the unused options.
The local, remote, archive-get-async, and archive-push-async commands were used to run functionality that was not directly available to the user. Unfortunately that meant they would not pick up options from the command that the user expected, e.g. backup, archive-get, etc.
Remove the internal commands and add roles which allow pgBackRest to determine what functionality is required without implementing special commands. This way the options are loaded from the expected command section.
Since remote is no longer a specific command with its own options, more manipulation is required when calling remote. This might be something we can improve in the config system but it may be worth leaving as is because it is a one-off, for now at least.
Although path-style URIs have been deprecated by AWS, they may still be used with products like Minio because no additional DNS configuration is required.
Path-style URIs must be explicitly enabled since it is not clear how they can be auto-detected reliably. More importantly, faulty detection could cause regressions in current installations.
This option was overloaded on the general type option but it makes sense to split this out since the meaning is pretty different.
Rename the values to conform to current standards, i.e. pg and repo, now that the Perl code won't care anymore.
Specifies the database user name when connecting to PostgreSQL.
If not specified pgBackRest will connect with the local OS user or PGUSER, which was the previous behavior.
Remove embedded Perl from the distributed binary. This includes code, configure, Makefile, and packages. The distributed binary is now pure C.
Remove storagePathEnforceSet() from the C Storage object which allowed Perl to write outside of the storage base directory. Update mock/all and real/all integration tests to use storageLocal() where they were violating this rule.
Remove "c" option that allowed the remote to tell if it was being called from C or Perl.
Code to convert options to JSON for passing to Perl (perl/config.c) has been moved to LibC since it is still required for Perl integration tests.
Update build and installation instructions in the user guide.
Remove all Perl unit tests.
Remove obsolete Perl code. In particular this included all the Perl protocol code which required modifications to the Perl storage, manifest, and db objects that are still required for integration testing but only run locally. Any remaining Perl code is required for testing, documentation, or code generation.
Rename perlReq to binReq in define.yaml to indicate that the binary is required for a test. This had been the actual meaning for quite some time but the key was never renamed.
82df7e6f and 9856fef5 updated tests that used test points in preparation for the feature not being available in the C code.
Since tests points are no longer used remove the infrastructure.
Also remove one stray --test option in mock/all that was essentially a noop but no longer works now that the option has been removed.
This should have been removed when the support for the option was removed in c7333190.
The option cannot be removed entirely because we don't want to error in the case where --force was specified but the stanza is valid.
The additional details include databases that can be used for selective restore and a list of tablespaces and symlinks with their default destinations.
This information is not included in the JSON output because it requires reading the manifest which is too IO intensive to do for all manifests. We plan to include this information for JSON in a future release.
This restore type automatically adds standby_mode=on to recovery.conf.
This could be accomplished previously by setting --recovery-option=standby_mode=on but PostgreSQL 12 requires standby mode to be enabled by a special file named standby.signal.
The new restore type allows us to maintain a common interface between PostgreSQL versions.
These features finally make the ls command practical.
Currently the JSON contains only name, type, and size. We may add more fields in the future, but these seem like the minimum needed to be useful.
If this option is set then ports appended to repo-s3-endpoint or repo-s3-host will be ignored.
Setting this option explicitly may be the only way to use a bare ipv6 address with S3 (since multiple colons confuse the parser) but we plan to improve this in the future.
The tests and documentation have been using the core storage layer but soon that will depend entirely on the C library, creating a bootstrap problem (i.e. the storage layer will be needed to build the C library).
Create a simplified Posix storage layer to be used by documentation and the parts of the test code that build and execute the actual tests. The actual tests will still use the core storage driver so they can interact with any type of storage.
This was not enforced at parse time because repo1-cipher-type could be passed on the command-line even in cases where encryption was not needed by the subprocess.
Filter repo-cipher-type so it is never passed on the command line. If the subprocess does not have access to the passphrase then knowing the encryption type is useless anyway.
Allow commands to be skipped by default in the command help but still work if help is requested for the command directly. There may be other uses for the flag in the future.
Update help for ls now that it is exposed.
Allows listing repo paths/files from the command-line, to be used primarily for testing and debugging.
This command is internal-only so the interface may change at any time without notice.
The new name is preferred because pgBackRest does not support any SSL protocol versions (they are all considered to be insecure).
The old name will continue to be accepted.
The rules for when a C remote is required are getting complicated and will get worse when restoreFile() is migrated.
Instead, set the --c option when a C remote is required. This option will be removed when the remote is entirely implemented in C.
These constants are easier than using cfgOptionName() and cfgCommandName() and lead to cleaner code and simpler to construct messages.
String versions are provided. Eventually all the strings will be used in the config structures, but for now they are useful to avoid wrapping with strNew().
