This new option allows tags to be added to objects in S3, GCS, and Azure repositories.
This was fairly straightforward for S3 and Azure, but GCS does not allow tags for a simple upload using the JSON interface. If tags are required then the resumable interface must be used even if the file falls below the limit that usually triggers a resumable upload (i.e. size < repo-storage-upload-chunk-size).
This option is structured so that tags must be specified per-repo rather than globally for all repos. This seems logical since the tag keys and values may vary by service, e.g. S3 vs GCS.
These storage tags are independent of backup annotations since they are likely to be used for different purposes, e.g. billing, while the backup annotations are primarily intended for monitoring.
The prior code would only connect to the first address provided by getaddrinfo().
Instead try each address in the list. If all connections fail then wait and try them all again until timeout.
Currently a round robin approach is used where each connection attempt must fail before the next connection is attempted. This works fine, for example, when an ipv6 address has no route to the host, but will work less well when a host answers but doesn't respond in a timely fashion.
We may consider a Happy Eyeballs approach in the future, but since pgBackRest is primarily a background process, it is not clear that slightly improved response time (in the case of failed connections) is worth the extra complexity.
The prior code did one list command against the storage for each WAL segment. This led to a lot of lists and was especially inefficient when the WAL (or the majority of it) was already present.
Optimize to keep the contents of a WAL directory and use them on a subsequent search. Leave the optimizations for a single WAL segment since other places still use that mode.
sckHostLookup() only returned the first address record returned from getaddrinfo(). The new AddressInfo object provides a full list of values returned from getaddrinfo(). Freeing the list is also handled by the object so there is no longer a need for FINALLY blocks to ensure the list is freed.
Add the selected address to the client/server names for debugging purposes.
This code does not attempt to connect to multiple addresses. It just lays the groundwork for a future commit to do so.
On certain file systems (e.g. ext4) pg_control may appear torn if there is a concurrent write while reading the file. To prevent an invalid read, retry until the checksum matches the control data.
Special handling is required for the pg-version-force feature since the offset of the checksum is not known. In this case, scan from the default position to the end of the data looking for a checksum match. This is a bit imprecise, but better than nothing, and the chance of a random collision in the control data seems very remote considering the ratio of data size (< 512 bytes) to checksum size (4 bytes).
This was discovered and a possible solution proposed for PostgreSQL in [1]. The proposed solution may work for backup, but pgBackRest needs to be able to read pg_control reliably outside of backup. So no matter what fix is adopted for PostgreSQL, pgBackRest need retries. Further adjustment may be required as the PostgreSQL fix evolves.
[1] https://www.postgresql.org/message-id/20221123014224.xisi44byq3cf5psi%40awork3.anarazel.de
If there are a lot of retries then the output might be very large and even be truncated by the error module. Either way, it is not good information for the user.
When a message is repeated, aggregate so that total retries and time range are output for the message. This provides helpful information about what happened without overwhelming the user with data.
The prior code gave a "free" extra iteration at the end of the wait, functionality that was copied directly from the equivalent code in Perl. This works and is mostly negligible except when wait loops are nested, in which case outer loops will always run twice even if an inner loop times out, which has a multiplying effect. For example, three nested wait loops with a timeout of three seconds will result in the inner loop being run four times (for a total of twelve seconds) even if it times out each time.
Instead make waitMore() stop exactly when time is up. This makes more sense because a complete failure and timeout of an inner loop means retrying an outer loop is probably a waste of time since that inner loop will likely continue to fail.
Also make waitRemaining() recalculate the remaining time rather than depending on the prior result.
Some tests needed to be adjusted to take into account there being one less loop. In general this led to a simplification of the tests.
Reinit a begin value in the wait unit tests. This is not related to the current change but it does make the time measurements more accurate and less likely to fail on an edge case, which has been observed from time to time.
This change appears to have a benefit for test runtime, which seems plausible especially for nested waits, but a larger sample of CI runs are needed to be sure.
The current tests only generate small quantities of WAL per backup but sometimes it is useful to generate large quantities for testing.
Fix the issues with generating large quantities of WAL and also improve memory management.
The prior code avoided uploading a chunk if it was not clear whether the write was complete or not. This was primarily due to the GCS documentation being very vague on what to do in the case of a zero-size chunk.
Now chunks are uploaded as they are available. This should improve performance and also reduces the diff against a future commit that absolutely requires zero-size chunks.
The restore command can run while the stanza is stopped so it makes sense for the archive-get command to follow the same rule.
The important thing is to ensure that all commands that write to the repository are stopped when the stanza is stopped.
The tests expect the group name/id to match between the host system and the container. If there is a conflict rename the group with the required id to the expected name.
This could have unintended consequences but it seems reasonably safe since we control everything that runs in the container and there should never be any system processes running.
The documentation indicates that leading tilde file paths for public/private keys are valid but the functionality was omitted from the original implementation.
Check command now checks multiple stanzas when the stanza option is omitted.
The stanza list is extracted from the current configuration rather than scanning the repository like the info command. Scanning the repository is a problem because configuration for each stanza may not be present in the current configuration. Since this functionality is new for check there is no regression.
Add a new section to the user guide to cover multi-stanza configuration and provide additional coverage for this feature.
Also fix a small issue in the parser when an indexed option has a dependency on a non-indexed option. There were no examples of this case in the previous configuration.
Bug Fixes:
* Preserve block incremental info in manifest during delta backup. (Reviewed by Stephen Frost. Reported by Francisco Miguel Biete Banon.)
* Fix block incremental file names in verify command. (Reviewed by Reid Thompson. Reported by Francisco Miguel Biete Banon.)
* Fix spurious automatic delta backup on backup from standby. (Reviewed by Stephen Frost. Reported by krmozejko, Don Seiler.)
* Skip recovery.signal for PostgreSQL >= 12 when recovery type=none. (Reviewed by Stefan Fercot. Reported by T.Anastacio.)
* Fix unique label generation for diff/incr backup. (Fixed by Andrey Sokolov. Reviewed by David Steele.)
* Fix time-based archive expiration when no backups are expired. (Reviewed by Stefan Fercot.)
Improvements:
* Improve performance of SFTP storage driver. (Contributed by Stephen Frost, Reid Thompson. Reviewed by David Steele.)
* Add timezone offset to info command date/time output. (Reviewed by Stefan Fercot, Philip Hurst. Suggested by Philip Hurst.)
* Centralize error handling for unsupported features. (Reviewed by Stefan Fercot.)
Documentation Improvements:
* Clarify preference to install from packages in the user guide. (Reviewed by Stefan Fercot. Suggested by dr-kd.)
When performing backup from standby the file sizes on the standby may not be equal to file sizes on the primary. This is because replication continues during the backup and by the time the file is copied from the standby it may have changed. Since we cap the size of all files copied from the standby this practically applies to truncation and in particular truncation of free space maps (at least, every case we have seen so far is an fsm). Free space maps are especially vulnerable since they are only partially replicated, which amplifies the difference between the primary and standby.
On an incremental backup it may look like the size has changed on the primary (because of the final size recorded by the standby in the prior backup) but the timestamp may not have changed on the primary and this will trigger a checksum delta for safety. While this has no impact on backup integrity, checksum delta incrementals can run much longer than regular incrementals and backup schedules may be impacted.
The solution is to preserve the original size in the manifest and use it to do the time/size check. In the case of backup from standby the original size will always be the size on the primary, which makes comparisons against subsequent file sizes on the primary consistent. Original size is only stored in the manifest when it differs from final size, so there should not be any noticeable manifest bloat.
It was possible for block incremental info to be lost if a file had been modified in such a way that block incremental would be disabled if the file were new, e.g. if the file shrank below the block incremental limit or the file timestamp regressed far enough into the past. In those cases the block incremental info would not be copied in manifestBuildIncr().
Instead always copy the block incremental info in case the file ends up being referenced to a prior backup.
The validation tests were not robust enough to catch this issue so they were improved in 1d42aed.
In the particular case that exposed this bug, a file had a timestamp that was almost four weeks in the past at full backup time. A few days later a fail over occurred and the next incremental ran on the new primary (old standby) in delta mode. The same file had a timestamp just a few hours older than in the full backup, but now four weeks older than the current backup. Block incremental was disabled for the file on initial manifest build because of its age, which meant the block incremental info was not copied into the new manifest. The delta then determined the file had not changed and referenced it to the full backup. On restore, the file appeared to be a normal file stored in a bundle but could not be decompressed because it was in fact a block incremental.
The verify command was not appending the .pgbi extension instead of the compression extension when verifying block incremental files stored outside a bundle.
Originally the idea was that verify would not need any changes (since it just examines repo-size and checksum) but at some point the new extension was added and broke that assumption.
Use backupFileRepoPathP() to generate the correct filename (Just like backup, restore, etc).
Referenced files were not being checked for validity unless they were hard linked to the current backup (which a lot of the tests did). Newer tests with bundling do not have hard links and so missed these checks.
Improve the validation code to check referenced files in the manifest even when they are not hard linked into the current backup.
Add a delta test for bundling/block incremental that includes a file old enough to get a block size of zero. These are good tests by themselves but they also reduce the churn in an upcoming bug fix.
The initial implementation used simple waits when having to loop due to getting a LIBSSH2_ERROR_EAGAIN, but we don't want to just wait some amount of time, we want to wait until we're able to read or write on the fd that we would have blocked on.
This change removes all of the wait code from the SFTP driver and changes the loops to call the newly introduced storageSftpWaitFd(), which in turn checks with libssh2 to determine the appropriate direction to wait on (read, write, or both) and then calls fdReady() to perform the wait using the provided timeout.
This also removes the need to pass ioSession or timeout down into the SFTP read/write code.
In the case that no backups were expired but time-based retention was met no archive expiration would occur and the following would be logged:
INFO: time-based archive retention not met - archive logs will not be expired
In most cases this was harmless, but when retention was first met or if retention was increased, it would require one additional backup to expire earlier WAL. After that expiration worked as normal.
Even once expiration was working normally the message would continue to be output, which was pretty misleading since retention had been met, even though there was nothing to do.
Bring this code in line with count-based retention, i.e. always log what should be expired at detail level (even if nothing will be expired) and then log info about what was expired (even if nothing is expired). For example:
DETAIL: repo1: 11-1 archive retention on backup 20181119-152138F, start = 000000010000000000000002
INFO: repo1: 11-1 no archive to remove
Seems easiest just to make the additional config required since it tests that custom ports are being used correctly. The test for synthetic was a noop since SFTP is not used in synthetic tests.
If there were at least two full backups and the last one was expired, it was impossible to make either a differential or incremental backup without first making a new full backup. The backupLabelCreate() function identified this situation as clock skew because the new backup label was compared with label of the expired full backup.
If the new backup is differential or incremental, then its label is now compared with the labels of differential or incremental backups related to the same full backup.
Also convert a hard-coded date length to a macro.
9ca492c missed adding auditing to this macro and as a result a few memory leaks have slipped through. Add auditing to the macro to close this hole.
Of the leaks found the only possibly serious one is in blockIncrProcess(), which would leak a PackRead of about eight bytes with every superblock. Since superblocks max out at a few thousand per file this was probably not too bad.
Also change the ordering of auditing in FUNCTION_TEST_RETURN_VOID(). Even though the order does not matter, having it different from the other macros is confusing and looks like an error.
This behavior is different than regular options where a repeated value will result in an error. It appears to be a legacy of the original Perl implementation, which used a hash as the underlying data type in the built-in command-line parser, and the C command-line parser was written to match.
This was missed in the C unit test migration and since then a new test was added that was not setting its timezone correctly.
This feature exists to make sure the tests will run on systems with different timezones and has no impact on the core code.
Bring PostgreSQL >= 12 behavior in line with other versions when recovery type=none.
We are fairly sure this did not work correctly when PostgreSQL 12 was released, but apparently the issue has been fixed since then. Either way, after testing we have determined that the behavior is now as expected.
Some features are conditionally compiled into pgBackRest (e.g. lz4). Previously checking to see if the feature existed was the responsibility of the feature's module.
Centralize this logic in the config/parse module to make the errors more detailed and consistent.
This also fixes the assert that is thrown when SFTP storage is specified but SFTP support is not compiled into pgBackRest.
This parameter is now optional and defaults to none so there is no reason to explicitly show it in user-facing documentation.
Also make the vm parameter in ci.pl optional to be consistent with how test.pl behaves.
The --no-log-timestamp option was missed when unit test building was migrated to C, which caused test timings to show up in the contributing guide. This caused no harm but did create churn in this file during releases.
Also improve the formatting when test timing is disabled.
Features:
* Block incremental backup. (Reviewed by John Morris, Stephen Frost, Stefan Fercot.)
* SFTP support for repository storage. (Contributed by Reid Thompson. Reviewed by Stephen Frost, David Steele.)
* PostgreSQL 16 support. (Reviewed by Stefan Fercot.)
Improvements:
* Allow page header checks to be skipped. (Reviewed by David Christensen. Suggested by David Christensen.)
* Avoid chown() on recovery files during restore. (Reviewed by Stefan Fercot, Marcelo Henrique Neppel. Suggested by Marcelo Henrique Neppel.)
* Add error retry detail for HTTP retries.
Documentation Improvements:
* Add warning about using recovery type=none. (Reviewed by Stefan Fercot.)
* Add note about running stanza-create on already-created repositories.
The prior timeouts were a bit aggressive and were causing timeouts in the Azure tests. There have also been occasional timeouts in other storage drivers.
The performance of CI environments is pretty variable so increased timeouts should make the tests more stable.
Double spaces have fallen out of favor in recent years because they no longer contribute to readability.
We have been using single spaces and editing related paragraphs for some time, but now it seems best to update the remaining instances to avoid churn in unrelated commits and to make it clearer what spacing contributors should use.
These were intended to allow the block list to be scanned without reading the map but were never utilized. They were left in "just in case" and because they did not seem to be doing any harm.
In fact, it is better not to have the block numbers because this allows us set the block size at a future time as long as it is a factor of the super block size. One way this could be useful is to store older files without super blocks or a map in the full backup and then build a map for them if the file gets modified in a diff/incr backup. This would require reading the file from the full backup to build the map but it would be more space efficient and we could make more intelligent decisions about block size. It would also be possible to change the block size even if one had already been selected in a prior backup.
Omitting the block numbers makes the chunking unnecessary since there is now no way to make sense of the block list without the map. Also, we might want to build maps for unchunked block lists, i.e. files that were copied normally.
The chown() was already skipped on the files restored from the repository but the same logic was not applied to the generated recovery files, probably because chown'ing a few recovery files does not have performance implications. Use the same logic for recovery files to determined if they need to be chown'd.
Ultimately this behavior is pretty hard to test, so add a fail safe into the Posix driver that will skip chown if the permissions are already as required.
These checks cause false negatives for page checksum verification when the page is encrypted because pd_upper might end up as 0 in the encrypted data. This issue is rare but reproducible given a large enough cluster.
Make these checks optional, but leave them enabled by default.
Centralize the code to allow it to be used in more places and update the protocol/server module to use the new code.
Since the time measurements make testing difficult, also add time and errorRetry harnesses to allow specific data to be used for testing. In the case of errorRetry, the production behavior is turned off by default during testing and only enabled for the errorRetry test module.
Ubuntu 18.04 will be EOL before the next release, so update to the oldest available Debian version.
Also fix one incorrect return value type, a test cast, and adjust some test timeouts.
A lot of these are left over from when object interfaces required allocations (changed in f6e30736 and 9ca9c8e4). Others are likely copy/paste errors.
This saves some space in the mem context and makes it clear that no allocations will be made.
The result is not intended to be freed directly so this makes memory tracking more accurate. Fix a few places where memory was leaking after a call to zNewFmt().
Also update an assert to make it clearer.
Eliminate the boilerplate of declaring this and assigning memory to it, which is the same for the vast majority of object creations.
Keep the old version of the macro as OBJ_NEW_BASE_BEGIN() for a few exceptions in the core code and (mostly) in the tests.
As in f6e30736, make the interface object the parent of the driver object rather than the interface being allocated directly in the driver object. Allow exceptions to this general rule for objects that need to retain ownership of their interfaces.
Each call to lockAcquireP() passed enough information to initialize the lock system. This was somewhat inefficient and as locks become more complicated it will lead to more code duplication. Since a process can only take one type of lock it makes sense to do most of the initialization up front.
Also reduce the log level of lockRelease() since it is only called at exit and the lock will be released in any case.
This minor optimization automatically clears the limit flag when limit is set to allocated size. This has no impact on the current code but will simplify a future commit where a conditional bufLimitClear() is being used.
Bug Fixes:
* Skip writing recovery.signal by default for restores of offline backups. (Reviewed by Stefan Fercot. Reported by Marcel Borger.)
Features:
* Block incremental backup (BETA). (Reviewed by John Morris, Stephen Frost, Stefan Fercot.)
Improvements:
* Keep only one all-default group index. (Reviewed by Stefan Fercot.)
Documentation Improvements:
* Add explicit instructions for upgrading between 2.x versions. (Contributed by Christophe Courtois. Reviewed by David Steele.)
* Remove references to SSH made obsolete when TLS was introduced.
Output a manifest in text or JSON format. Neither format is complete but they cover the basics.
In particular the manifest command outputs the complete block restore when the filter option is specified and the block delta when the pg option is also specified. This is non-destructive so it is safe to execute against a running cluster.
Bug Fixes:
* Remove the distinction between maps where super block size is equal to block size and maps where they are not. In practice, maps with equal blocks are now rare and most of the optimizations can be applied directly to super blocks where the blocks are equal. This fixes a bug where a map that was created with equal size blocks and then converted to differing block sizes would generate an invalid map.
* Free reads during restore to avoid running out of file handles.
Improvements:
* Store super block sizes in the block map. This allows the final block size to be removed from the block list and provides a more optimal restore and better potential for analysis.
* Always round the super block size up to the next block size. This makes the number of blocks per super block more predictable.
* Allow super block sizes to be changed at will in the map. The first case for this is to store the reduced super block size required when the last super block is short but it could be used to dynamically change the super block size to optimize compression.
* Store a block count rather than a list of blocks in a super block. Blocks must always be sequential, though there may be an offset to the first block in a super block. This saves 11-14% on space for checksum sizes 6-7.
* In the case that all the blocks for a super block are present, and there is no offset, the block size is omitted.
This allows options to be marked as beta, which will require that the --beta option be supplied to prevent accidental usage of a beta feature.
The online and command-line documentation also show warnings when options are beta.
Block sizes are incremented when the size of the map becomes as large as a single block. This is arbitrary but it appears to give a good balance of block size vs map size.
The full backup super block size is set to minimize loss of compression efficiency since most blocks in the database will likely never be modified. For diff/incr backup super blocks, a smaller size is allowable since only modified blocks are stored. The overall savings of not storing unmodified blocks offsets the small loss in compression efficiency due to the smaller super block and allows more granular fetches during restore.
As calculated this size is not correct since it does not include the parts of prior block incrementals that are required to make the current block incremental valid. At best this could be approximated and the resulting values might be very confusing.
For now, at least, exclude this metric for block incremental backups.
xxHash is significantly faster than SHA-1 so this helps reduce the overhead of the feature.
A variable number of bytes are used from the xxHash depending on the block size with a minimum of six bytes for the smallest block size. This keeps the maps smaller while still providing enough bits to detect block changes.
Small blocks sizes can lead to reduced compression efficiency, so allow multiple blocks to be compressed together in a super block. The disadvantage is that the super block must be read sequentially to retrieve blocks. However, different super block sizes can be used for different backup types, so the full backup super block sizes are large for compression efficiency and diff/incr are smaller for retrieval efficiency.
Forks may update pg_control version or WAL magic without affecting the structures that pgBackRest depends on.
This option forces pgBackRest to treat a cluster as the specified version when it cannot be automatically identified.
When restoring an offline backup on PostgreSQL >= 12, skip writing recovery.signal by default since this will error if the backup was made with wal_level=minimal. If the user explicitly sets the type option to something other than none, then write recovery.signal as usual since it is possible to do Point-In-Time-Recovery from an offline backup as long as wal_level was not minimal.
Raw encryption was already being used for block incremental. This commit adds raw compression to block incremental where possible (see da918587).
Raw compression/encryption is also added to bundling for a backup set when block incremental is enabled on the full backup. This prevents a break in backward compatibility since block incremental is not backward compatible.
Raw format saves 12 bytes of header for gzip and 4 bytes of checksum for lz4 (plus CPU overhead). This may not seem like much, but over millions of small files or incremental blocks can really add up. Even though it may be a relatively small percentage of the overall backup size it is still objectively a large amount of data.
Use raw format for protocol compression to exercise the feature.
Raw compression format will be added to bundling and block incremental in a followup commit.
Make the interface object the parent of the driver object rather than the interface being allocated directly in the driver object.
The prior method was more efficient when mem contexts had a much higher cost. Now mem contexts are cheap so it makes more sense to structure the objects in a way that works better with mem context auditing. This also means the mem context does not need to be stored separately since it can be extracted directly from the interface object.
There are other areas that need to get the same improvement before the specialized objMoveContext() and objFreeContext() functions can be removed.
This flag does not currently affect restore behavior but it will in an upcoming commit. Set the flag here to simplify the test diff in the upcoming commit.
It is possible for a group index to be created for an option that is later found to not meet dependencies. In this case all values would be default leading to a phantom group, which can be quite confusing.
Remove group indexes that are all default (except the final one) and make sure the key for the final all default group index is 1.
The code is not completely reflowed yet so there are some cases that uncrustify will not catch. The formatting will be improved over time.
Some block of code require special formatting so have been surrounded with the {uncrustify-off}/{uncrustify-on} markers. These exceptions should be kept to a minimum.
Add --code-format (to reformat code) and --code-format-check (to check formatting) to test.pl.
Add a CI test that will check code formatting. Code must be correctly formatted before it can be merge to integration.
Add documentation to the coding standards for code formatting.
uncrustify has been configured to be as close to the current format as possible but the following changes were required:
* Break long struct initializiers out of function calls.
* Bit fields get extra spacing.
* Strings that continue from the previous line no longer indented.
* Ternary operators that do not fit on a single line moved to the next line first.
* Align under parens for multi-line if statements.
* Macros in header #if blocks are no longer indented.
* Purposeful lack of function indentation in tests has been removed.
Currently uncrustify does not completely reflow the code so there are some edge cases that might not be caught. However, this still represents a huge improvement and the formatting can be refined going forward.
Support code for uncrustify will be in a followup commit.
Bring the format(printf) attribute in line with the FN_NO_RETURN and FN_INLINE_ALWAYS macros.
This is simpler to read and can be customized for different compilers.
stackTraceToZ() was split this way in c8264291 to allow complete coverage. 0becb6da added a shim to improve coveage but missed simplifying the function.
Improvements:
* Remove support for PostgreSQL 9.0/9.1/9.2. (Reviewed by Stefan Fercot.)
* Restore errors when no backup matches the current version of PostgreSQL. (Contributed by Stefan Fercot. Reviewed by David Steele. Suggested by Soulou.)
* Add compress-level range checking for each compress-type. (Reviewed by Stefan Fercot. Suggested by gkleen, ViperRu.)
Documentation Improvements:
* Add warning about enabling "hierarchical namespace" on Azure storage. (Reviewed by Stefan Fercot. Suggested by Vojtech Galda, Pluggi, asjonos.)
* Add replacement for linefeeds in monitoring example. (Reviewed by Stefan Fercot. Suggested by rudonx, gmustdie, Ivan Shelestov.)
* Clarify target-action behavior on various PostgreSQL versions. (Contributed by Chris Bandy. Reviewed by David Steele, Anton Kurochkin, Stefan Fercot. Suggested by Anton Kurochkin, Chris Bandy.)
* Updates and clarifications to index page. (Reviewed by Stefan Fercot.)
* Add dark mode to the website. (Suggested by Stephen Frost.)
Running valgrind and backtrace together has been causing tests to timeout in CI, mostly likely due to limited resources. This has not been a problem in normal development environments.
Since it is still important to run backtraces for debugging, split the u22 test that was doing all this work to run coverage and backtrace together and valgrind-only as a separate test. As a bonus these tests run faster separately and since they run in parallel the total execution time is faster.
The primary goal of the block incremental backup is to save space in the repository by only storing changed parts of a file rather than the entire file. This implementation is focused on restore performance more than saving space in the repository, though there may be substantial savings depending on the workload.
The repo-block option enables the feature (when repo-bundle is already enabled). The block size is determined based on the file size and age. Very old or very small files will not use block incremental.
The callbacks in iniLoad() made the downstream code more complicated than it needed to be so use an iterator model instead.
Combine the two functions that were used to load the ini data to remove code duplication. In theory it would be nice to use iniValueNext() in the config/parse module rather than loading a KeyValue store but this would mean a big change to the parser, which does not seem worthwhile at this time.
It is possible for functions to accidentally leak child contexts into the calling context, which may use a lot of memory depending on the use case and where it happens.
Use the function return type to determine what should be returned and error when something else is returned. Add FUNCTION_AUDIT_*() macros to handle exceptions.
This checking is only performed during unit tests on the code being covered by the specific unit test.
Note that this does not work yet for memory allocations, i.e. memNew(). These are pretty rare so are not as much of an issue and they can be added in the future.
Allocating memory made these functions simpler but it meant that memory was leaking into the calling context when logging was enabled. It is not clear that this was an issue but it seems that trace level logging could result it a lot of memory usage depending on the use case.
This also makes it possible to audit allocations returned to the calling context, which will be done in a followup commit.
Also rename objToLog() to objNameToLog() since it seemed logical to name the new function objToLog().
This fills in backtrace info at the bottom of the call stack when the stack trace is incomplete due to testing. This does not affect release builds, which is why it did not make the first cut, but it turns out to be useful for testing and barely changes the release code (when we do release this).
The recursion test in common/error was simplified because it would now return a very large trace.
The error detail should be output when the error is an assert (this part was working) or the log level is at least debug. In cases where log-level-console was at least debug but log-level-stderr was not the detail was lost.
Improve the range checking to output error detail to stderr when log-level-console is at least debug.
The libbacktrace feature has not been working since the move to meson because libbacktrace detection was not added to the meson build. Add libbacktrace to meson and improve the feature so that it can be compiled into release builds.
The prior implementation fetched line numbers with each stack trace push. Not only was this slow but it missed any functions that were not being tracked on our stack.
Instead just examine the backtrace when an error happens and merge it with the info we have on our stack. If the backtrace is not available then the output remains as before.
Also remove --backtrace from test.pl since the library is now auto-detected.
Leave this library out of the production build for now to give it a little time to shake out in testing.
When this code was migrated to C the unit tests were not included because there were more important priorities at the time.
This also requires some adjustments to coverage because of the new code location.
BUFFER_EXTERN() provides a clean way to create buffer constants.
Convert HASH_TYPE_SHA256_ZERO_STR to HASH_TYPE_SHA256_ZERO_BUF to be consistent with HASH_TYPE_SHA1_ZERO_BUF.
This should make it a little clearer what the variable (VR) macros are doing since the declaration/definition cannot both be set to extern (but functions can).
Splitting the variable macros out also allows them to be changed in the future with little churn, while changing the function macro creates a large amount of churn.
This is immediately useful because it will detect any extern'd functions or variables that are not being used. It also detects functions or variables that are declared but not defined.
If a FV/VR_EXTERN macro is missing it will be detected either because of a mismatch in the declaration/definition or because a new defined symbol will appear in the nm test.
Eventually the unity build will be used to create a more optimized pgbackrest binary but that will need to wait.
Similar to b9be4fa5, these functions are not used by the core code so move them to the build module. The new implementation is a little less efficient but that is much less of a worry in the build/test code.
Also remove regExpMatchSize() since it was not longer needed.
Neither of these functions were used by the core code. strReplace() is only used in the tests but it doesn't hurt to put it in build since the build code is not distributed.
This was done by checking the extension but it is possible to include a module that does not have a vendor or auto extension. Instead make it explicit that the module is included in another module.
Also change the variable from "include" to "included" to make it clearer what it indicates.
It is probably not a good idea to restore the latest backup when it was not made from the current PostgreSQL version. If there is no backup after a stanza-upgrade then replicas might be built with a prior version leading to failures.
Add an error in this case if the latest backup would be used, i.e. --set or --type=time/lsn is not specified.
The prior range checking was done based on the valid values for gz. While this worked it was a subset of what is available for lz4 and zst.
Allow the range to be specified for each compress-type. Adding this functionality to the parse module would be a better solution but that is a bigger project than this fix deserves, at least for now.
Calculate a checksum of the data stored in the repository when a file is transformed (e.g. compressed). This allows resume and verify to operate without needing to decompress/decrypt the data.
This can also be used to verify more complex formats such as block incremental and allow backups from the repository without needing to decompress the data to verify the checksum.
Add some basic encrypted tests to maintain coverage. These will be expanded in a future commit.
Manifest checksums were stored as hex-encoded strings due to legacy compatibility with Perl. Storing the checksums as binary in memory uses half the space and avoids many conversions.
There is no change to the on-disk manifest format which stores the checksum as a hex-encoded string.
Our new policy is to support ten versions of PostgreSQL, the five supported releases and the last five EOL releases. As of PostgreSQL 15, that means 9.0/9.1/9.2 are no longer supported by pgBackRest.
Remove all logic associated with 9.0/9.1/9.2 and update the tests.
Document the new support policy.
Update InfoPg to read/write control versions for the history in backup.info, since we can no longer rely on the mappings being available. In theory this could have been an issue after removing 8.3/8.4 if anybody was using a version that old.
This avoids constructs such as decodeToBin(encodeBase64, ...) which are confusing since decode and encode are used in the same function call. decodeToBin(encodingBase64, ...) makes it clearer what is happening.
The storageNewItrP() permissions test was running twice with the errorOnMissing flag set to false. Fix by setting to true for one test.
Also update the comments to be clearer about what the tests are doing and fix minor formatting.
This allows test backups to be run in other test modules.
It is likely that more logic will be moved here but for now this suffices to get test backups working in the restore module.
When loading prior manifests without the new reference list, the code failed to add the current backup to the reference list. Since the current backup is never explicitly referenced, building references from the file list was not sufficient to generate a complete list.
The main problem here was a bad test, fixed in 28f6604. This masked the issue and prevented it from being found. Now it is clear in the test that the current label is missing from the reference list.
Fix by adding the current label to the reference list if a reference list is not stored in the manifest.
Changing the label of a manifest that already had a label was not a good test and it ended up masking a bug where the current backup label was not being added to the reference list on manifest load, since manifestBackupLabelSet() added the label to the reference list. In fact, manifestBackupLabelSet() should never be called after a manifest load or even after the label has been set.
Add an assertion to prevent manifestBackupLabelSet() being called when the label is already set.
The bug exposed here will be fixed in a subsequent commit.
Hopefully this will make it a little clearer to the user what is wrong when they specify an indexed option without an index.
Also fix an ambiguous use of cfgParseOptionP(). The prior code worked in that it set prefixMatch = true but it was not very readable.
Bug Fixes:
* Fix memory leak in file bundle backup/restore. (Reviewed by John Morris, Oscar. Reported by Oscar.)
* Fix protocol error on short read of remote file. (Reviewed by Stephen Frost.)
Improvements:
* Do not store references for zero-length files when bundling. (Reviewed by Stefan Fercot.)
* Use more generic descriptions for pg_start_backup()/pg_stop_backup(). (Reviewed by Greg Sabino Mullane, David Christensen. Suggested by Greg Sabino Mullane.)
Test Suite Improvements:
* Update test.pl --psql-bin option to match command-line help. (Contributed by Koshi Shibagaki. Reviewed by David Steele.)
The option to specify the path to psql was shown in the command-line help as --psql-bin but the option was actually named --pgsql-bin.
Rename to match the help so they are consistent.
The magic in the header is only required so that command-line openssl will recognize the file as being encrypted. In cases where the encrypted data cannot be read with the command-line tool it makes sense to omit the header magic to save some space.
Unfortunately this cannot be enabled for file bundling because it would break backward compatibility. However, it should be possible to enable it for the combination of bundling and block incremental.
The prior code required coverage in the storage/remote module for all filters that could be used remotely.
Now the filter handlers are set at runtime so any filter list can be used with a remote. This is more flexible and makes coverage testing easier. It also resolves a test dependency.
Move the command/remote unit test near the end so it will have access to all filters without using depends.
This flag skips truncation when opening a file for write on drivers that support it, currently Posix and CIFS. This is convenient for cases where the file needs to be manipulated directly using the file descriptor. Using the file descriptor is not ideal and additional functionality should be added to the storage interface, but for now at least this avoids code duplication, especially on close which updates owners, the timestamp, syncs, etc.
The remote driver forbids no truncate because a file descriptor is never available for a remote storage write object.
Update two instances in the current code which benefit from this new functionality, but the primary reason for the change is to support more complex restore deltas in the upcoming block incremental feature.
