The prior default was determined by benchmarking the Perl code prior to the 1.0 release. In general buffer allocation was more expensive in Perl so large buffers gave the best performance. This was due to multiple buffer allocations for each filter in an IO operation.
The C code allocates fixed buffers for each IO operation so the cost for buffer allocation is lower than Perl. That being the case it made sense to benchmark the C code to determine the optimal buffer default.
The performance/storage tests were used to measure the performance of a variety of filters. 1GiB of data was processed by each filter 10 times and the results of the tests were averaged.
While most buffer sizes gave similar performance, 1MiB appeared to perform the best overall. Of course, different architectures are likely to yield different results but this seems like a sensible default. The buffer-size option may still need to be manually configured to give optimal results.
Raw test data for reference:
4MB buffer (prior default)
copy time 1807ms, avg time 180ms, avg throughput: 5942MB/s
md5 time 14200ms, avg time 1420ms, avg throughput: 756MB/s
sha1 time 11431ms, avg time 1143ms, avg throughput: 939MB/s
sha256 time 23463ms, avg time 2346ms, avg throughput: 457MB/s
gzip -6 time 381199ms, avg time 38119ms, avg throughput: 28MB/s
lz4 -1 time 15484ms, avg time 1548ms, avg throughput: 693MB/s
1MB buffer (new default)
copy time 1760ms, avg time 176ms, avg throughput: 6100MB/s
md5 time 13739ms, avg time 1373ms, avg throughput: 781MB/s
sha1 time 11025ms, avg time 1102ms, avg throughput: 973MB/s
sha256 time 22539ms, avg time 2253ms, avg throughput: 476MB/s
gzip -6 time 372995ms, avg time 37299ms, avg throughput: 28MB/s
lz4 -1 time 15118ms, avg time 1511ms, avg throughput: 710MB/s
512K buffer
copy time 1782ms, avg time 178ms, avg throughput: 6025MB/s
md5 time 13724ms, avg time 1372ms, avg throughput: 782MB/s
sha1 time 10959ms, avg time 1095ms, avg throughput: 979MB/s
sha256 time 22982ms, avg time 2298ms, avg throughput: 467MB/s
gzip -6 time 378120ms, avg time 37812ms, avg throughput: 28MB/s
lz4 -1 time 15484ms, avg time 1548ms, avg throughput: 693MB/s
256K buffer
copy time 1805ms, avg time 180ms, avg throughput: 5948MB/s
md5 time 13706ms, avg time 1370ms, avg throughput: 783MB/s
sha1 time 11074ms, avg time 1107ms, avg throughput: 969MB/s
sha256 time 22588ms, avg time 2258ms, avg throughput: 475MB/s
gzip -6 time 372645ms, avg time 37264ms, avg throughput: 28MB/s
lz4 -1 time 16346ms, avg time 1634ms, avg throughput: 656MB/s
Improve the accuracy of the calculations in several areas with better integer expressions.
Make the input buffer size configurable. Previously it was always 1mb, i.e. block size.
Use a macro for output results to reduce code duplication.
Reason phrases (e.g. OK) are optional in HTTP 1.1 but the space after the status code is not. When the reason phrase was missing the required space was trimmed along with the trailing CR leading to a format error.
Rework the logic to preserve the space and allow empty reason phrases.
Found while testing against the Backblaze S3-compatible API.
Vendorized code is copied from another project when a library is not available and a git subproject won't work. Currently all the vendorized code is copied from PostgreSQL but it makes sense to have a more general mechanism for indicating vendorized code.
The .vendor extension will be used to denote vendorized code in the same way that .auto is used to denote auto-generated code.
Some lz4 versions between r131 and 1.7.5 did not return a sufficient buffer size from LZ4F_compressBound() to allow LZ4F_compressEnd() to complete reliably. While this issue was fixed in lz4 1.7.5 there are affected versions in supported distributions such as CentOS/RHEL 7.
Use one of the hacks suggested in https://github.com/lz4/lz4/issues/290 to increase the buffer size enough for LZ4F_compressEnd() to complete. This means that a slightly larger buffer size is required for all versions but it seems worth it to (hopefully) to fix the issue in all lz4 versions.
If cryptoInit() had not already been called then EVP_get_digestbyname() would fail.
This does not appear to be a problem currently because of call order. Also, newer versions of OpenSSL auto-initialize.
Some headers in the S3 driver were common HTTP headers that may be used by other drivers that utilize HTTP.
Also change the order of HTTP_HEADER_TRANSFER_ENCODING to be alphabetical.
Rather than bS3 use strStorage which can indicate more than two storage types.
For the moment there are still only two storage types but this change is required before more can be added.
apt.postgresql.org provides packages for ppcle64 so it's important that we support it.
Rearrange jobs a bit based on current runtimes and importance. Also reduce the number of tests run for arm64 since it is slower than other architectures.
cdebfb09 added relative times to backup.into but a subtle issue was introduced that would cause the tests to fail if the time acquired by cmdExpire() was exactly the same as timeNow used to format backup.info. cmdExpire() was working correctly given the inputs, but the tests did not run predictably.
This was found while running the tests with --no-valgrind --no-coverage which allows them to run a lot faster, thus exposing the timing issue.
These tests required sudo to achieve complete coverage.
Add a new coverage exception, vm_covered, that applies to code that can only be covered in a container. When the test is run outside of a container code sections that require a container will be excluded with TEST_CONTAINER_REQUIRED and the coverage exception will be added to prevent a coverage error.
This does require marking up the core code with vm_covered, which in some modules (e.g. common/io/tls/client) can be extensive. It's possible that some of these tests can be rewritten to be less dependent on sudo but no attempt was made to do that here.
Only allow coverage summaries in a vm since coverage summaries outside a vm will not be complete, which was true even before this commit.
Update error types throw by bzip2 to be more consistent with gzip.
Update the bzip2 and gzip error default to be AssertError as that's the more common case in both, and add a 'break;' to the default clause -- we don't intend to be just falling through those case statements, even if the default is the last, we should be explicit about that.
Clean up some tabs that snuck in, rename a variable to be more clear, and add some comments.
It's important that the values in these variables are maintained even after an exception is thrown, so they must be marked volatile.
Found while testing on the ppc64le architecture.
The --repo-retention-full-type option allows retention of full backups based on a time period, specified in days.
The new option will default to 'count' and therefore will not affect current installations. Setting repo-retention-full-type to 'time' will allow the user to use a time period, in days, to indicate full backup retention. Using this method, a full backup can be expired only if the time the backup completed is older than the number of days set with repo-retention-full (calculated from the moment the 'expire' command is run) and at least one full backup meets the retention period. If archive retention has not been configured, then the default settings will expire archives that are prior to the oldest retained full backup. For example, if there are three full backups ending in times that are 25 days old (F1), 20 days old (F2) and 10 days old (F3), then if the full retention period is 15 days, then only F1 will be expired; F2 will be retained because F1 is not at least 15 days old.
Checking for free space in the output buffer worked, but if the buffer was completely filled then deflate() would need to be called again, which was wasteful and a bit confusing for debugging.
Instead, use Z_STREAM_END to detect that compression is done.
This change was inspired by the bz2 implementation in a021c9fe since bz2 does not allow BZ2_bzCompress() to be called after BZ_STREAM_END is returned. That made it obvious that gz would prefer the same implementation, even if it is more tolerant. The documentation at https://www.zlib.net/manual.html agrees.
Newer versions of sudo output this message to stderr when run in a container:
sudo: setrlimit(RLIMIT_CORE): Operation not permitted
See https://github.com/sudo-project/sudo/issues/42 for details.
A simple workaround is to prevent sudo from disabling core dumps. This seems safe enough because if sudo is segfaulting then core files are the least of our worries.
Newer versions of sudo output this message to stdout when run in a container:
sudo: setrlimit(RLIMIT_CORE): Operation not permitted
See https://github.com/sudo-project/sudo/issues/42 for details.
A simple workaround is to prevent sudo from disabling core dumps. This seems safe enough because if sudo is segfaulting then core files are the least of our worries.
apt.postgresql.org will soon be providing packages for arm64 so it's important that we support it.
Testing on multiple architectures also helps expose potential issues in popular architectures. See 10a5182d for an example.
There are a number of Valgrind errors on Ubuntu 12.04 which do not happen on newer distro versions. However, suppressions for these errors have masked legitimate issues in subsequent code.
Instead, make suppressions VM specific so errors in other VMs are not masked.
EVP_CIPHER_CTX_cleanup() was being called instead of EVP_CIPHER_CTX_free() so most of the memory was being freed but not all of it.
This leak was masked by Valgrind suppressions which are only applicable to Ubuntu 12.04, which will be addressed in a future commit.
Travis-CI arm64 was not happy with this pattern, perhaps because connected was being reset after a longjmp() even though it should have stayed with its originally initialized value of false. In any case, tlsClientOpen() ended up returning NULL on error rather than throwing an exception.
The new pattern seems simpler and passes all tests unmodified, so even though the error was only seen in TlsClient it makes sense to propagate to the other clients.
Resolving localhost can vary based on the local network configuration so it is safer to just use a static IP.
This was found while testing on Travis-CI arm64.
bzip2 is a widely available, high-quality data compressor. It typically compresses files to within 10% to 15% of the best available techniques (the PPM family of statistical compressors), while being around twice as fast at compression and six times faster at decompression.
bzip2 is currently available on all supported platforms.
This was an oversight in 438b957f which added multiple compression type support. The booleans were interpreted as none and gz which works fine for the CompressType enum until the position of gz or none changes.
It's not clear how useful single-character zero-terminated constants are or if we want propagate them through the code, but it at least makes sense to centralize the constants used by the Buffer and String objects.
Zstandard is a fast lossless compression algorithm targeting real-time compression scenarios at zlib-level and better compression ratios. It's backed by a very fast entropy stage, provided by Huff0 and FSE library.
Zstandard version >= 1.0 is required, which is generally only available on newer distributions.
The previous location was too late to allow --var=s3-all=y to work with --require=/repo-host, which depends on /quickstart/configure-archiving.
Since the section is not included in production documentation, the position is not very important to flow so just move it to where it works.
If the WAL path is absolute then pg1-path should be optional but in fact it was required to load pg_control.
Skip the pg_control check when pg1-path is not specified. The check against the stanza version/system-id remains to protect the repo from corruption.
Perhaps this was intended to verify the WAL size but was never implemented.
Verifying the WAL size is probably a good idea so this member may be added back if the feature is implemented.
An upcoming feature requires new parameters for storagePosixNew() and this causes a lot of churn because almost every test creates a Posix storage object. Some refactoring in the tests might reduce this duplication but storagePosixNew() is collecting a lot of parameters so converting to storagePosixNewP() makes sense in any case.
There are relatively few call sites in the core code but they still benefit from better readability after this change.
There is no conflict if the path containing a file link is a parent path of a path link. The Perl code apparently had this right but the migration to C missed it.
Exclude this case when checking for link conflicts.
