vcmi/CMT.cpp

// CMT.cpp : Defines the entry point for the console application.
//
#include "stdafx.h"
#include "SDL.h"
#include <cmath>
#include "stdafx.h"
#include <stdio.h>
#include <string.h>
#include <assert.h>
#include <vector>
#include "zlib.h"
#include <cmath>
#include <ctime>
#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
#  include <fcntl.h>
#  include <io.h>
#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
#else
#  define SET_BINARY_MODE(file)
#endif
#define CHUNK 16384
#define pi 3.14159


#include "CAmbarCendamo.h"
#include "mapHandler.h"
#include "global.h"
/* Compress from file source to file dest until EOF on source.
   def() returns Z_OK on success, Z_MEM_ERROR if memory could not be
   allocated for processing, Z_STREAM_ERROR if an invalid compression
   level is supplied, Z_VERSION_ERROR if the version of zlib.h and the
   version of the library linked do not match, or Z_ERRNO if there is
   an error reading or writing the files. */
SDL_Surface * ekran;
int def(FILE *source, FILE *dest, int level, int winBits=15, int memLevel =8)
{
	int ret, flush;
	unsigned have;
	z_stream strm;
	unsigned char in[CHUNK];
	unsigned char out[CHUNK];

	/* allocate deflate state */
	strm.zalloc = Z_NULL;
	strm.zfree = Z_NULL;
	strm.opaque = Z_NULL;
	ret = deflateInit2(&strm, level,Z_DEFLATED,winBits,memLevel,0);//8-15, 1-9, 0-2
	if (ret != Z_OK)
		return ret;

	/* compress until end of file */
	do {
		strm.avail_in = fread(in, 1, CHUNK, source);
		if (ferror(source)) {
			(void)deflateEnd(&strm);
			return Z_ERRNO;
		}
		flush = feof(source) ? Z_FINISH : Z_NO_FLUSH;
		strm.next_in = in;

		/* run deflate() on input until output buffer not full, finish
		   compression if all of source has been read in */
		do {
			strm.avail_out = CHUNK;
			strm.next_out = out;
			ret = deflate(&strm, flush);	/* no bad return value */
			assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
			have = CHUNK - strm.avail_out;
			if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
				(void)deflateEnd(&strm);
				return Z_ERRNO;
			}
		} while (strm.avail_out == 0);
		assert(strm.avail_in == 0);	 /* all input will be used */

		/* done when last data in file processed */
	} while (flush != Z_FINISH);
	assert(ret == Z_STREAM_END);		/* stream will be complete */

	/* clean up and return */
	(void)deflateEnd(&strm);
	return Z_OK;
}

/* Decompress from file source to file dest until stream ends or EOF.
   inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
   allocated for processing, Z_DATA_ERROR if the deflate data is
   invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
   the version of the library linked do not match, or Z_ERRNO if there
   is an error reading or writing the files. */
int inf(FILE *source, FILE *dest, int wBits = 15)
{
	int ret;
	unsigned have;
	z_stream strm;
	unsigned char in[CHUNK];
	unsigned char out[CHUNK];

	/* allocate inflate state */
	strm.zalloc = Z_NULL;
	strm.zfree = Z_NULL;
	strm.opaque = Z_NULL;
	strm.avail_in = 0;
	strm.next_in = Z_NULL;
	ret = inflateInit2(&strm, wBits);
	if (ret != Z_OK)
		return ret;

	/* decompress until deflate stream ends or end of file */
	do {
		strm.avail_in = fread(in, 1, CHUNK, source);
		if (ferror(source)) {
			(void)inflateEnd(&strm);
			return Z_ERRNO;
		}
		if (strm.avail_in == 0)
			break;
		strm.next_in = in;

		/* run inflate() on input until output buffer not full */
		do {
			strm.avail_out = CHUNK;
			strm.next_out = out;
			ret = inflate(&strm, Z_NO_FLUSH);
			assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
			switch (ret) {
			case Z_NEED_DICT:
				ret = Z_DATA_ERROR;	 /* and fall through */
			case Z_DATA_ERROR:
			case Z_MEM_ERROR:
				(void)inflateEnd(&strm);
				return ret;
			}
			have = CHUNK - strm.avail_out;
			if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
				(void)inflateEnd(&strm);
				return Z_ERRNO;
			}
		} while (strm.avail_out == 0);

		/* done when inflate() says it's done */
	} while (ret != Z_STREAM_END);

	/* clean up and return */
	(void)inflateEnd(&strm);
	return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;
}

/* report a zlib or i/o error */
void zerr(int ret)
{
	fputs("zpipe: ", stderr);
	switch (ret) {
	case Z_ERRNO:
		if (ferror(stdin))
			fputs("error reading stdin\n", stderr);
		if (ferror(stdout))
			fputs("error writing stdout\n", stderr);
		break;
	case Z_STREAM_ERROR:
		fputs("invalid compression level\n", stderr);
		break;
	case Z_DATA_ERROR:
		fputs("invalid or incomplete deflate data\n", stderr);
		break;
	case Z_MEM_ERROR:
		fputs("out of memory\n", stderr);
		break;
	case Z_VERSION_ERROR:
		fputs("zlib version mismatch!\n", stderr);
	}
}



void SDL_PutPixel(SDL_Surface *ekran, int x, int y, Uint8 R, Uint8 G, Uint8 B)
{
	 Uint8 *p = (Uint8 *)ekran->pixels + y * ekran->pitch + x * ekran->format->BytesPerPixel;
	 if(SDL_BYTEORDER == SDL_BIG_ENDIAN)
	 {
		  p[0] = R;
		  p[1] = G;
		  p[2] = B;
	 }
	 else
	 {
		  p[0] = B;
		  p[1] = G;
		  p[2] = R;
	 }
	 SDL_UpdateRect(ekran, x, y, 1, 1);
}
int _tmain(int argc, _TCHAR* argv[])
{
	srand ( time(NULL) );
	SDL_Surface *screen, *temp;
	std::vector<SDL_Surface*> Sprites;
	float i;
	if(SDL_Init(SDL_INIT_VIDEO|SDL_INIT_TIMER/*|SDL_INIT_EVENTTHREAD*/)==0)
	{
		
		screen = SDL_SetVideoMode(1024,768,24,SDL_HWSURFACE|SDL_DOUBLEBUF/*|SDL_FULLSCREEN*/);
		ekran = screen;
		// FILE * no = fopen("wyn.txt","w"); 
		FILE * zr = fopen("mal.txt","r");
		FILE * ko = fopen("wyn.txt","w");
		FILE * kodd = fopen("kod.txt","r");
		FILE * deko = fopen("dekod.txt","w");
		def(zr,ko,1);
		inf(kodd, deko);
		fclose(ko);fclose(zr);
		for (int i=0;i<=20;i++)
		{
			zr = fopen("kod2.txt","r");
			char c [200];
			sprintf(c,"wyn%d.txt",i);
			ko = fopen(c,"w");
			def(zr,ko,i);
			fclose(ko);fclose(zr);
		}
		//def(zr,no,1); 
		CAmbarCendamo * ac = new CAmbarCendamo("2gryf");
		ac->deh3m();
		ac->loadDefs();
		mapHandler * mh = new mapHandler();
		mh->reader = ac;
		mh->init();
		//SDL_Rect * sr = new SDL_Rect(); sr->h=64;sr->w=64;sr->x=0;sr->y=0;
		SDL_Surface * teren = mh->terrainRect(0,0,55,25);
		SDL_BlitSurface(teren,NULL,ekran,NULL);
		SDL_Flip(ekran);

		//SDL_Surface * ss = ac->defs[0]->ourImages[0].bitmap;
		//SDL_BlitSurface(ss, NULL, ekran, NULL);

		SDL_Delay(3000);
			SDL_Quit();
		return 0;
	}
	else
	{
		printf("Co� posz�o nie tak: %s/n",SDL_GetError());
		return -1;
	}
}