this adds a new root-level `upx` config, so users can pack their
binaries with upx :)
---------
Signed-off-by: Carlos Alexandro Becker <caarlos0@users.noreply.github.com>
This brings the scoops feature a bit more closer to similar pipes, like
brew and krew.
- It now supports multiple scoops
- It improves some validations to prevent wrong manifests
- It uses extra.binaries instead of extra.builds, as brew does too
- extra.builds is now unused, will be removed in a subsequent PR
- More tests were added as well
closes#3941
---------
Signed-off-by: Carlos Alexandro Becker <caarlos0@users.noreply.github.com>
basically redoing #3559 as it got impossible to merge with the many
changes since it was open (which is totally my fault for not merging it
earlier).
Anyhow, still a WIP, going also doing some other related improvements in
the way.
cc/ @graytonio
closes#3559closes#3525
---------
Signed-off-by: Carlos Alexandro Becker <caarlos0@users.noreply.github.com>
Co-authored-by: Grayton Ward <graytonio.ward@gmail.com>
This adds a log with the size of the generated binaries/packages/etc in
the end of the build process, and also adds it to the artifacts.json
closes#3949
TODO:
- [x] tests
- [x] docs
- [ ] ??
---------
Signed-off-by: Carlos Alexandro Becker <caarlos0@users.noreply.github.com>
This now works for files added to the source archive **after** the `git
archive` command is run. During the `git archive`, it seems that the
`tar` is still using some format that doesn't support utf-8 by default.
Tomorrow I'll look more into it.
see https://pkg.go.dev/archive/tar#Formatcloses#3812
---------
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
Co-Authored-By: Mohammed Al Sahaf <msaa1990@gmail.com>
We support `.tar.gz` since the beginning, and `.tar.xz` for a long time.
`.tgz` and `.txz` are just commonly used shorthands for the same
formats.
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
This reverts back to using `git archive` for the source archives... but
will keep supporting extra files.
##### How it works:
Basically, we run `git archive` as before.
Then, we make a backup of the generated archive, and create a new one
copying by reading from the backup and writing into the new one.
Finally, we write the extra files to the new one as well.
This only happens if the configuration does have extra files, otherwise,
just the simple `git archive` will be run.
PS: we can't just append to the archive because weird tar format
paddings et al.
---------
Signed-off-by: Carlos Alexandro Becker <caarlos0@users.noreply.github.com>
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
closes#3485
also fixed a bug in file creation for github: it was always searching
for the file in the default branch
also, we don't need to create the file first, update does both create
and update.
TODO: implement the for krew, scoop, etc...
---------
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
<!--
Hi, thanks for contributing!
Please make sure you read our CONTRIBUTING guide.
Also, add tests and the respective documentation changes as well.
-->
<!-- If applied, this commit will... -->
This commit will fix bad version tag sort if there is a prerelease on
the same commit as a release tag. Current output is shown below
```
❯ git tag --points-at HEAD --sort=-version:refname --format='%(creatordate)%09%(refname)'
Thu Mar 2 21:38:51 2023 +0300 refs/tags/v1.13.0-rc3
Thu Mar 2 21:38:51 2023 +0300 refs/tags/v1.13.0
```
Test is changed to match current default value so it will fail without
this fix.
Default value `-` is set to the one that is described inside
[docs](https://goreleaser.com/how-it-works/?h=prerelease#how-it-works),
but people are still allowed to change it.
Output with fix applied
```
❯ git -c versionsort.suffix=- tag --points-at HEAD --sort -version:refname --format='%(creatordate)%09%(refname)'
Thu Mar 2 21:38:51 2023 +0300 refs/tags/v1.13.0
Thu Mar 2 21:38:51 2023 +0300 refs/tags/v1.13.0-rc3
```
<!-- # Provide links to any relevant tickets, URLs or other resources
-->
More info about `versionsort.suffix` can be found
[here](https://github.com/git/git/blob/master/Documentation/config/versionsort.txt#L5)
Docs as well both schemas are updated as well.
I am not sure if users should be allowed to change this option at all.
here's an idea: `goreleaser healthcheck`
It'll check if the needed dependencies (docker, git, etc) are available
in the path... this way users can preemptively run it before releasing
or to debug issues.
What do you think?
Here's how it looks like:
<img width="1007" alt="CleanShot 2023-03-02 at 23 24 26@2x"
src="https://user-images.githubusercontent.com/245435/222615682-d9cd0733-d900-43d1-9166-23b2be589b3a.png">
---------
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
I have no idea why this never happened before... the lock was
ineffective in `artifacts.List`, which should have caused at least some
race condition at some point.
Anyway, got it once locally while working on another feature, and
couldn't believe my eyes.
Fixed, thank goodness!
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
This option was still being supported, even though undocumented, for
many years now.
I think it's finally time to sunset it for good, in 6 months :)
---------
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
The commit will add the `bare` option to ko publisher options when
set/passed via config `.goreleaser.yaml`.
Currently, even the `bare: true` is set via config, the option was never
passed to `ko` PublisherOptions.
#3742
---------
Co-authored-by: Batuhan Apaydın <batuhan.apaydin@trendyol.com>
- improved how we handle `--rm-dist` deprecation so it looks more like
other deprecations
- improved deprecation error message a bit as well
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
continuing the PR by @developer-guy
- [x] should be a publisher, as it does publish the images it builds
every time
- [x] `Default` method does not work
- [x] the `fromConfig` thing should probably be on the defaults, too
- [x] wire `--skip-ko`
- [x] documentation
- [x] more tests
- [x] use same registry as docker tests does
- [ ] see if we can make the log output match goreleaser's
- [ ] ??
closes#2556closes#3490
Signed-off-by: Batuhan Apaydın <batuhan.apaydin@trendyol.com>
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
Co-authored-by: actions-user <actions@github.com>
Co-authored-by: Jason Hall <jason@chainguard.dev>
Co-authored-by: Batuhan Apaydın <batuhan.apaydin@trendyol.com>
with this patch, a config like:
```yaml
archives:
- format: tar.gz
# this name template makes the OS and Arch compatible with the results of uname.
name_template: >-
{{ .ProjectName }}_
{{- title .Os }}_
{{- if eq .Arch "amd64" }}x86_64
{{- else if eq .Arch "386" }}i386
{{- else }}{{ .Arch }}{{ end }}
{{- if .Arm }}v{{ .Arm }}{{ end }}
rlcp: true
files:
- src: "build/**/*"
dst: .
nfpms:
- package_name: foo
contents:
- src: "build/**/*"
dst: usr/share/foo
formats:
- apk
```
will eval this:
<img width="1384" alt="CleanShot 2022-12-21 at 22 21 00@2x"
src="https://user-images.githubusercontent.com/245435/209034244-7c31b5f7-cfcd-4825-bb2f-7dd463c5286a.png">
as much as I would like to make this the default, it would be a breaking
change, so we really can't do it.
If `dst` is empty, it'll have the same behavior as before (no rlcp), and
if `strip_parent` is set, it will also still have the same behavior.
Finally, if the format is binary, `rlcp` is ignored too (as it doesn't
make sense).
So, this only changes if:
- your format is not binary; and
- you have files with `src` and `dst` set
Then, goreleaser will warn you to set `rlcp: true`.
## todo
- [x] docs
- [x] more tests probably
- [x] any ideas for a better name for the new config option?
fixes#3655
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
this allows to template the owner, group and mtime in file infos inside
archives.
should help towards reproducible builds!
goes well with #3618
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
<!--
Hi, thanks for contributing!
Please make sure you read our CONTRIBUTING guide.
Also, add tests and the respective documentation changes as well.
-->
<!-- If applied, this commit will... -->
fixes#3584
When following the reproduction steps in #3584 I now get the following
contents for the zip archive:
```
$ goreleaser --snapshot --skip-publish
...
$ (mkdir thezip && cd thezip && unzip ../dist/test_0.0.0-SNAPSHOT-none_darwin_amd64.zip) && ls -lR thezip
Archive: ../dist/test_0.0.0-SNAPSHOT-none_darwin_amd64.zip
inflating: a/x -> ../x
inflating: a/x2 -> x
inflating: x
inflating: test
finishing deferred symbolic links:
a/x -> ../x
a/x2 -> x
total 1640
drwxr-xr-x 4 orawlings staff 128 Nov 22 16:19 a
-rwxr-xr-x 1 orawlings staff 833104 Nov 22 16:19 test
-rw-r--r-- 1 orawlings staff 2 Nov 22 15:32 x
thezip/a:
total 0
lrwxr-xr-x 1 orawlings staff 4 Nov 22 16:19 x -> ../x
lrwxr-xr-x 1 orawlings staff 1 Nov 22 16:19 x2 -> x
```
<!-- Why is this change being made? -->
I'm using goreleaser for a project that packages multiple binaries in
zip archives. We also include symlinks within the zip archives to give
some of the binaries an alternate (usually shorter) spelling so they are
easier to invoke on the command line.
This brings the zip archive behavior regarding symlinks in line with
tar.gz and tar archives.
<!-- # Provide links to any relevant tickets, URLs or other resources
-->
The replacements thing was always a bit weird, especially on archives.
We can solve that with templates, so, removing I'm deprecating it.
Also did the same on other places that had it the same feature.
Closes#3588
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
this should prevent yamlschema from complaining on some fields that
accept an integer or string (goarm) and a bool or string (skip*)
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
This PR adds support for generating the structure used to pack and push
Chocolatey Packages. And will solve the #3154
Is not ready for merge yet, but has the main structure, and ready for
comments.
Accordingly to Chocolatey, in order to build a package, it's necessary a
`.nuspec` and `chocolateyinstall.ps1` files at least, having these ones,
we could pack and distribute without adding the binary inside the final
package and that was implemented here.
To complete, will be necessary to define the package build and
distribute, however will be required to have Chocolatey installed
(Windows Only). One of alternatives that I thought was, publish the
files like Scoop and Brew in a separate repository, and there we could
use `chocolatey` through
[crazy-max/ghaction-chocolatey](https://github.com/crazy-max/ghaction-chocolatey).
Chocolatey has a lot of good examples of repositories:
https://github.com/chocolatey-community/chocolatey-packages/tree/master/automatic/curl
A final compilation of the missing parts:
- [x] How to pack and push (chocolatey)
- [x] Documentation
Sorry for the long description😄
All feedback very welcome!
Co-authored-by: Carlos Alexandro Becker <caarlos0@users.noreply.github.com>
<!--
Hi, thanks for contributing!
Please make sure you read our CONTRIBUTING guide.
Also, add tests and the respective documentation changes as well.
-->
<!-- If applied, this commit will... -->
This PR improves the handling of shared or static libraries by
GoReleaser. It uses the default behaviour of the Go compiler by
appending the right extension to libraries.
* `.so` and `.a` for Linux shared libraries and static libraries
respectively
* `.dylib` and `.a.` on Darwin
* `.dll` and `.lib` on Windows (pre-existent)
It does not add any configuration option to `.goreleaser.yml`, since it
leverages the existing `buildmode` flag.
Additionally, this PR takes care of adding the generated header file
into the archive.
<!-- Why is this change being made? -->
Personally I would leverage this change to release some software both as
a CLI and as a shared library. I believe others who use CGo or need
interoperability with Go from other languages could benefit from this.
<!-- # Provide links to any relevant tickets, URLs or other resources
-->
This was previously discussed in #3497.
I couldn't quite think of a proper way to add some tests to the header
archiving feature. Any recommendation?
<!--
Hi, thanks for contributing!
Please make sure you read our CONTRIBUTING guide.
Also, add tests and the respective documentation changes as well.
-->
<!-- If applied, this commit will... -->
This PR implements the Archlinux packages that were added in nfpm
v2.20.0, as well as tests and documentation for them.
<!-- Why is this change being made? -->
<!-- # Provide links to any relevant tickets, URLs or other resources
-->
goreleaser/nfpm#133
goreleaser/nfpm#543
Fixes#3469
Co-authored-by: Carlos Alexandro Becker <caarlos0@users.noreply.github.com>
closes#3407
Signed-off-by: Sheridan C Rawlins <scr@yahooinc.com>
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
Co-authored-by: Sheridan C Rawlins <scr@yahooinc.com>
this allows the user to specify the abbrev lenght to use, and will also add the option to omit the commit hash altogether by setting it to -1.
default is doing nothing
closes#3348
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
`--add-file` adds only the `--prefix` joined with the basename of the added file, so, adding a folder like `vendor` would break havoc.
this basically writes our own source archives (which are more compressed) and allows to add an entire folder easily, as well as other mappings as `archives` already supports.
refs #3102#2911
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
We should not imply the target_commitish, as some users might want to
have the code in one repo and the releases in another (e.g. private
code, public releases), so the commit might not be there.
We should instead allow the user to set the `target_commitish` (or not),
and pass it down to the github api.
refs 95bba02211
refs #3044
refs #3330
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* feat: add version for homebrew dependencies
* resolve conflicts
* resolve conflicts
* feat: allow to specify version of brew deps
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* docs: brew
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
Co-authored-by: Purushotham <purushotham@hasura.io>
* feat: remove gofish
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: remove more unused code
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: remove more references
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* feat: strip_parent_binary_folder
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* docs: clarify dir
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: fmt
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* Support mTLS with client certificate when configured.
* Fix the omitempty typo.
* Add check for missing cert as well.
* Added documentation for artifactory and upload, as well as how to run mkdocs locally
* set pip version to just 3.
* Added example to the full config.
* Remove the Pipfile and update documentation to mention the task.
* update language in doc about multiarch images.
Co-authored-by: Sheridan C Rawlins <scr@ouryahoo.com>
* feat: allow to override env for a target
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: dupe key
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* test: fixes
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* feat: added --skip-before flag
this would allow to skip global before hooks
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: skip docker test
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
Allow to skip the entire docker images and manifests builds.
Might be useful for faster local builds et al.
closes#3144
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* refactory: improve cmd code
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: improve time reporting
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: improve artifacts json
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: improve artifacts json
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: diffs
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* docs: improve root cmd help
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* feat: replacing logs
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: tests et al
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* feat: update termenv/lipgloss
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* wip: output
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: pin dep
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: update
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: tests
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: tests
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: deps
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: dep
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* feat: remove empty_folders for good
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: build
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* feat: update jsonschema library
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
* fix: test
Signed-off-by: Carlos A Becker <caarlos0@users.noreply.github.com>
basically allows to use goreleaser against a repo with a git url without both owner and repo name.
closes#3060closes#3058
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: add builds.no_main_check and builds.command
Added two more options to the builds section:
- command: allow to override the command being run. E.g. instead of
`go build`, one could run `go test -c` by setting gobinary, command
and flags, respectively.
- no_main_check: by default, goreleaser will fail if there's no main
function. This option allows to disable that check.
This PR effectively make GoReleaser able to release Go test binaries
instead of just "regular" binaries.
closes#3037
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* test: fix broken tests
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: deprecate gofish
gofish was deprecated by its authors, this deprecates it here too
refs https://github.com/goreleaser/goreleaser/discussions/2998
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: do not publish rig anymore
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* docs: remove install
* chore: deprecate
* fix(gofish): fix broke logs
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat(announce): added Slack notification options
This feature adds support for specifying a richer content in Slack
announcements. We may now specify "blocks" and "attachments" to produce
better-looking announcement messages.
* fixes#2986
The goreleaser configuration only exposes the top-level structures and does not
check the validity of the Slack API internal structures. This way, we do
not inject hard dependencies on changes in the Slack API.
Notice: untyped config parsing introduces a little hack to have yaml and
JSON marshaling work together properly. This hack won't be necessary
with yaml.v3.
How this has been tested?
-------------------------
* Added unit tests for the config parsing
* Added a (skipped) e2e test.
For now, this requires a valid Slack webhook, so I've been able to test this manually.
Signed-off-by: Frederic BIDON <fredbi@yahoo.com>
* added more unit tests
Signed-off-by: Frederic BIDON <fredbi@yahoo.com>
* removed yaml.v2 hack
Signed-off-by: Frederic BIDON <fredbi@yahoo.com>
The idea is to be able to filter by extension and send each extension to
a different place, if needed.
This also affects the artifactory pipe.
Also updated artifactory docs a bit.
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
this allows to set the -mod flag on the command used to grab the module
root package, in case its needed to ignore the vendor folder, force
readonly, etc...
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: more go 1.18
moved more workflows to go 1.18, switched some code to strings.Cut
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* revert unwanted change
* feat: annotated tag body
this adds another template variable, `TagBody`, with the body of the annotated tag/commit message only.
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* refactor: tag contents
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: lintian overrides
allow to more easily set lintian overrides
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: lintian
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: allow to override build flags by goos/goarch/etc
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* test: improve
* fix: typos
* feat: templates, merges
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* test: fix
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* test: one more case
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* Update internal/builders/golang/build.go
Co-authored-by: Brian Flad <bflad417@gmail.com>
* Update internal/builders/golang/build.go
Co-authored-by: Brian Flad <bflad417@gmail.com>
* test: more tests
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
Co-authored-by: Brian Flad <bflad417@gmail.com>
* feat: expose runtime goos and goarch on templates and metadata
* test: fix duplicated map literal in some os/arch
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: aur PKGBUILD integration
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: guess install, improve formatting
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: more deterministic
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: binary releases, push, more tests
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: accept key as text
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: improvements
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: srcinfo
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: compile
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: everything
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: lint
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: renames, docs, etc
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* docs: link to docs
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: go mod tidy, title
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: srcinfo tmpl
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: missing close quote
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: templates
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: always defaults conflicts and provides
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: ssh command
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: maintainers can be a list
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: ensure -bin suffix, more tests and docs
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: this will never happen
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: whitespaces
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: goreleaser config
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
GitLab's Generic Package Repository allows uploading files
to GitLab, as an alternative to attachments.
Added the flag `use_package_registry` to the `gitlab_urls` config.
When false, the default, it will behave as before.
When true, it will publish the file to the Generic Package Registry.
Either way, the URL is bound to the release the same
Updated `go-gitlab` to version 0.52.2 which has the new
`GenericPackages.PublishPackageFile` function.
Co-authored-by: Carlos Alexandro Becker <caarlos0@users.noreply.github.com>
* feat: allow to always log signing output
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: improve code a bit
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: allow to customize release notes update behavior
closes#1384
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: make it a bit better
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: jsonschema
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: expose .PreviousTag
* fix: previous tag will never be a commit
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: tests
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* docs: tag
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat(schema): Add command that generates the jsonschema for .goreleaser.yml files
This commit adds the jsonschema/schema subcommand that generates a jsonschema doc based on the Project go struct.
For the config types that alternatively allow you to specify a string via custom UnmarshalYAML function, this commit adds the JSONSchemaType function, so the type gets documented with an oneOf with string or itself.
Add yaml key names for properties that are currently missing them, so alecthomas/jsonschema generates the keys with correct casing.
Signed-off-by: Patrick Hahn <patricksilashahn@gmx.net>
* fix: Add linguist-generated attribute to generated schema json to exclude this file from pull request size validation
Signed-off-by: Patrick Hahn <patricksilashahn@gmx.net>
* fix: run gofumpt
Signed-off-by: Patrick Hahn <patricksilashahn@gmx.net>
* chore(schema): update alecthomas/jsonschema and regenerate schema.json
Signed-off-by: Patrick Hahn <patricksilashahn@gmx.net>
* feat: artifacts.Remove
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: fatbinary
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: run fatbinary on pipeline
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: make archives work with fat binaries
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: make brew work with fat binaries
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: make gofish work with fat binaries
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* test: archive binary fatbin
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* docs: fat binaries
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* test: fix on linux
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat(ci): enable fat bins on goreleaser itself
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* refactor: rename to universal binaries
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: config
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: rename prop
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: changelog from github
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* refactor: unifying client mocks
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* refactor: unifying client mocks
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: mocks
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* test: added tests
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: remove unused code
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* test: added more
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: testdata
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* fix: fmt
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* test: fix
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* test: fix
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* docs: improve docs
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* refactor: unifying client mocks
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* refactor: unifying client mocks
Signed-off-by: Carlos A Becker <caarlos0@gmail.com>
* feat: allow default branch to be used in gitlab
* feat: add func to get default branch
* fix: matching branch args
* feat: branch customization
* fix: fixing dummyclient naming
* refactor: remove createbranch
* feat: Adding gitlab branch customization
* feat: testing for github and gitea defaultbranch
* fix: remove dummy debug message
* fix: removing note about gitea not being supported
* feat: allow default branch to be used in gitlab
* docs: links updat
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* chore: delete kodiak.yml
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* feat: add func to get default branch
* fix: matching branch args
* feat: branch customization
* fix: docs: Missing mattermost docs on website (#2543)
* docs: update CircleCI example (#2545)
* fix: fixing dummyclient naming
* docs: some little fixes on the webpage (#2547)
* feat: some little fixes on the webpage
Signed-off-by: Batuhan Apaydın <batuhan.apaydin@trendyol.com>
* Update www/docs/overrides/home.html
Co-authored-by: Carlos Alexandro Becker <caarlos0@users.noreply.github.com>
* refactor: remove unused not impl error (#2540)
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* feat: add template support for homebrew tap owner (#2544)
* feat: add template support for homebrew tap name
refs #2544
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* refactor: remove createbranch
* feat: Adding gitlab branch customization
* feat: testing for github and gitea defaultbranch
* fix: remove dummy debug message
* fix: removing note about gitea not being supported
Co-authored-by: Carlos Alexandro Becker <caarlos0@gmail.com>
Co-authored-by: Engin Diri <engin.diri@mail.schwarz>
Co-authored-by: Ricardo N Feliciano <FelicianoTech@gmail.com>
Co-authored-by: Batuhan Apaydın <batuhan.apaydin@trendyol.com>
Co-authored-by: Carlos Alexandro Becker <caarlos0@users.noreply.github.com>
Co-authored-by: Erik Weber <terbolous@gmail.com>
* feat: allow to skip announcers
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* docs: announce.skip
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* refactor: improve middleware
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: upload tests
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: twitter tests
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: source tests
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: snapshot tests
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* test: improved some tests
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: snapcraft skip
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip slack
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip sign
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip scoop
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip reddit
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip discord
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip publish
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip nfpm
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip milestone
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip custompublishers
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip checksums
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip changelog
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip brew
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip blob
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip before
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip artifactory
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip announce
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip defaults
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: cmds
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip docker
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* chore: todo
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: go.mod
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip release
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: remove old skip pipe errors
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip teams
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip brew
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix/test: skip smtp
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: lint issues
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip docker
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip brew and scoop
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip docker
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* fix: skip http/artifactory
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* test: increase coverage
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* test: fix
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* refactor: improve build
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
* test: coverage
Signed-off-by: Carlos Alexandro Becker <caarlos0@gmail.com>
