For the less common conflict types DD, AU, UA, DU, and UD, we would previously
only show "* Unmerged path" in the main view, which isn't helpful. Also, for
some of these we would split the main view and show this text both in the
unstaged changes and staged changes views, which is a bit embarrassing.
Improve this by offering more explanation about what's going on, and what the
most likely way to resolve the situation is for each case.
- **PR Description**
* The keybind for moving a commit up in the interactive rebase example
of the README file is incorrect.
I've changed it to the keybind present in current versions of Lazygit
- **PR Description**
When selecting a range of commits by selecting the top one and then
pressing shift-down to create a range, and then pressing enter and
checking out one of the files by pressing `c`, you would get the file
checked out with its state at the bottom end of the range, which is not
what you want; it is expected to check out the file at the state that
the diff shows it changes to. (And if the file was only created in the
middle of that range, trying to check it out would result in an error.)
Fix this by paying attention to a "from-to" range selection, and
checking out the file at the "to" state.
Related to #4420.
The test shows a misbehavior: even though the diff shows "-one" and "+three",
meaning that "three" is the state we want to check out, we get "one". The reason
is that the checkout file command doesn't pay attention to range selections, it
only looks at the "moving end" of the range. Had we created the range by
selecting "two" and then pressed shift-up to "three", we would have gotten the
expected result.
- **PR Description**
When using gpg signing on tags via the git config `tag.gpgSign=true`, it
is not possible to do a lightweight tag. You must do an annotated tag
(Which is allowed to have an empty description).
This PR augments the existing `WithGpgHandling` helper to allow it to
specifically target commit signing and tag signing. It then uses that
handler, and creates an annotated tag, when the git config demands tag
GPG signing. By default it will launch the tag signing in a new
subprocess. This does require that users click an extra `<enter>` after
creating a signed tag, but this is currently the behavior for signed
commits, so I don't feel too bad about that. If they want, they can use
the LazyGit configuration option of `git.overrideGpg: true` to promise
to LazyGit that they do not need a GPG sub-process (because they
reliably already have gpg-agent or similar running in the background).
This again matches the current behavior for GPG signed commits.
This has no integration test because we don't have the machinery set up
in place to set up a GPG key inside of our integration test framework.
Fixes https://github.com/jesseduffield/lazygit/issues/2955
The actual usage is case insensitive, so this doesn't actually matter.
But if fills my heart with joy.
The test is case sensitive, but the actual response to `git config
commit.gpgSign` is equivalent to `git config commit.gppsign`
- **PR Description**
This removes generated Config.md entries that are contain the word:
`deprecated` (case insensitive) anywhere in their header comment.
I think adding in deprecated configs into the reference config clutters
it at best, and encourages users to use those configs at worst. They are
still going to be validated by the schema, but this PR removes them from
the generated config.
I also added in the missing `deprecated` yaml tags in our user config in
anticipation of https://github.com/invopop/jsonschema/pull/79 getting
merged.
- **PR Description**
Include empty arrays and maps in the generated Config.md
It's not an ideal solution because there's no indication of what kind of objects
you can add to those maps or arrays, but at least they show up at all (with a
comment containing a link to more information), and that's already an improvement.
It's not an ideal solution because there's no indication of what kind of objects
you can add to those maps or arrays, but at least they show up at all (with a
comment containing a link to more information), and that's already an
improvement.
As discussed in #1984, this PR modifies the code such that the `w`
command always commits without pre-commit hooks. The `skipHookPrefix` is
still considered when starting the commit messaged with the prefix in
the regular commit command using `c`.
Skipping pre-commits also works when switching to the editor and adding
a co author from the the `w` command
Add verify flag
Add and update integration tests
Rename verify to forceSkipHooks
Adapt CommitSkipHooks integration test to actually use a hook
Remove forceSkipHooks param from OnConfirm et al
Simplify tests
- **PR Description**
This PR adds a new bulk action for submodules.
As I often work with a lot of submodules that are hierarchically
structured, the flag "--recursive" saves a lot of work.
- **PR Description**
Since they started releasing .0 versions with 1.21.0, the go version
need to be a full release version specifier and not a go language
version. They relented and added support for defaulting to a .0 release
if none is specified in later 1.23.x releases, but for users with local
1.21 or 1.22 toolchains the lack of a full release specifier breaks
them. And going forwards this is more technically correct anyway.
See https://github.com/golang/go/issues/62278#issuecomment-1693620853
Since they started releasing .0 versions with 1.21.0, the go version
need to be a full release version specifier and not a go language
version. They relented and added support for defaulting to a .0 release
if none is specified in later 1.23.x releases, but for users with local
1.21 or 1.22 toolchains the lack of a full release specifier breaks
them. And going forwards this is more technically correct anyway.
See https://github.com/golang/go/issues/62278#issuecomment-1693620853
Assert the entire lines using Equals instead of Contains. This makes the tests a
bit easier to read, and it makes it much easier to decide how they need to be
changed when we change the layout (like we do in the last commit of this
branch).
It is true that this requires changing all these tests for any future UI
changes, but I think this is a good price to pay; those adaptions are trivial
and can be done without thinking.
I'm pretty sure that the check for the main view was meant to be done with the
commit selected in the commits panel, not with the first file of the commit
files view selected, so it was pressing enter too early. It's pure coincidence
that the test worked.
- **PR Description**
Some people have the need to get at the file content of a file as it was
in an earlier commit. They expect to press `e` in the commit files view
and get the file opened in the state it was in at that commit, somehow.
I explained a few times (e.g. in #3902, #4109, and #4327) that this is
not how `e` should work; so if we want this as a feature, we'd need it
as a separate command. However, it's a bit tricky to implement; if we
check out the selected file to a temp file, it's unclear when to remove
the file again. Alternatively we could use EditAndWait to open the file,
then we would block until the user closes the editor and delete the file
then. This is probably not the best user experience though, e.g. it
wouldn't allow opening two files from an older commit at once.
Instead of finding solutions to all these questions, this PR takes a
simpler route and adds a command to the "Copy to Clipboard" menu that
allows copying the entire content of a file. Users can then open a new,
empty editor buffer and paste it in, this is almost as good as opening a
temp file, but without all the questions. This was suggested in #4327.
- **Please check if the PR fulfills these requirements**
* [x] Cheatsheets are up-to-date (run `go generate ./...`)
* [x] Code has been formatted (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#code-formatting))
* [x] Tests have been added/updated (see
[here](https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md)
for the integration test guide)
* [x] Text is internationalised (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#internationalisation))
* [ ] If a new UserConfig entry was added, make sure it can be
hot-reloaded (see
[here](https://github.com/jesseduffield/lazygit/blob/master/docs/dev/Codebase_Guide.md#using-userconfig))
* [ ] Docs have been updated if necessary
* [x] You've read through your own file changes for silly mistakes etc
This is useful for copying the entire content of the selected file as it was at
the selected commit.
We only add it to the commit files panel; it is not needed in the files panel,
because there you can simply press "e" to edit the file.
- **PR Description**
This allows changing git config values while lazygit is running (e.g. in a
different terminal tab, or even in lazygit's ":" shell prompt), and have them
take effect immediately, while still getting some benefit from caching them
while lazygit is in the foreground.
Addresses #4240.
This allows changing git config values while lazygit is running (e.g. in a
different terminal tab, or even in lazygit's ":" shell prompt), and have them
take effect immediately, while still getting some benefit from caching them
while lazygit is in the foreground.
@jesseduffield:
> Let's revert this PR, given that, as @TimShilov says, the
post-checkout hook will receive a flag stating whether the checkout was
for a file or a branch, meaning it's within the user's power to just
update the hook script to only run on branch checkouts if desired.
