The remote branches controller was using its own escape method meaning it didn't go through the flow of cancelling
an active filter. It's now using the same approach as the sub-commits and commit-files contexts: defining a parent
context to return to upon hittin escape.
Given that we now persist search/filter states even after a side context loses focus, we need to make it really
clear to the user that the context is currently being searched/filtered
This is a pickle: initially I wanted it so that a filter would cancel automatically if the current context lost focus.
But there are situations where you want to retain the focus, e.g. when a popup appears, or when you view the commits
of a branch. The issue is that when you view the commits of a branch, the branches context is removed from the context
stack. Even if this were not the case, you could imagine going branches -> sub-commits -> files -> sub-commits, where
in that case branches would definitely be off the stack upon navigating to the files context.
So because I'm too lazy to find a proper solution to this problem, I'm just making it so that filters in side contexts
are retained unless explicitly cancelled.
There's another edge case this commit handles which is that if I'm in the sub-commits context via the branches context
and start a search, then navigate to the reflog context and hit enter to get to the sub-commits context again, I need
to cancel the search before I switch. Likewise with the commit files context.
For consistency with the previous commit.
Note that this menu entry is used both for unstaged and for staged changes, and
for staged changes it is not quite accurate, as we are not discarding changes in
that case (just unstaging them). Not sure it's worth fixing this; it's still
better than "Delete", anyway.
The title was saying "Unstage lines", which was just wrong. The text said
"Delete lines", which can be seen as a bit misleading; we are only discarding
the changes to the selected lines, not deleting the lines themselves.
For consistency, rename the config variable skipUnstageLineWarning accordingly.
When stopping in a rebase because of a conflict, it is nice to see the commit
that git is trying to apply. Create a fake todo entry labelled "conflict" for
this, and show the "<-- YOU ARE HERE ---" string for that one (in red) instead
of for the real current head.
We use CommitFilesController also for the files of commits that we show
elsewhere, e.g. for branch commits, tags, or stashes. It doesn't make sense to
discard changes from those (for stashes it might be possible to implement it
somehow, but that would be a new feature), so we disallow it unless we are in
the local commits panel.
Discarding changes to an entire directory doesn't quite work correctly in all
cases; for example, if the current commit added files to the directory (but the
directory existed before) then those files won't be removed.
It might be possible to fix the command so that these cases always work for
directories, but I don't think it's worth the effort (you can always use a
custom patch for that), so let's display an error for now.
We have not been good at consistent casing so far. Now we use 'Sentence case' everywhere. EVERYWHERE.
Also Removing 'Lc' prefix from i18n field names: the 'Lc' stood for lowercase but now that everything
is in 'Sentence case' there's no need for the distinction.
I've got a couple lower case things I've kept: namely, things that show up in parentheses.
By constructing an arg vector manually, we no longer need to quote arguments
Mandate that args must be passed when building a command
Now you need to provide an args array when building a command.
There are a handful of places where we need to deal with a string,
such as with user-defined custom commands, and for those we now require
that at the callsite they use str.ToArgv to do that. I don't want
to provide a method out of the box for it because I want to discourage its
use.
For some reason we were invoking a command through a shell when amending a
commit, and I don't believe we needed to do that as there was nothing user-
supplied about the command. So I've switched to using a regular command out-
side the shell there
If a given menu item has an associated keybinding of 'enter', hitting enter won't actually execute
that item unless your cursor is on it. This creates confusion, and so we're going to use a strikethrough
style to communicate that the keybinding is reserved for something else.
The option doesn't have any affect in these views, so we don't need to toggle it
here. But the problem was the HandleFocus call at the end: this would activate
the wrong view, so we need to avoid it here.
Show an error if the user tries to turn the option on, to let them know that it
doesn't work here.
It's not possible to reliably stage things into a custom patch when "ignore
whitespace" is on, so always treat it as off here (like we do in the staging
panel).
It looks like this is a regression that was introduced in 8edad826ca.
Our refresh code may try to push a context. It does this in two places:
1) when all merge conflicts are resolved, we push a 'continue merge?' confirmation context
2) when all conflicts of a given file are resolved and we're in the merge conflicts context,
we push the files context.
Sometimes we push the confirmation context and then push the files context over it, so the user
never sees the confirmation context.
This commit fixes the race condition by adding a check to ensure that we're still in the
merge conflicts panel before we try escaping from it
I don't see a reason why this restriction to have the selection be always
visible was necessary. Removing it has two benefits:
1. Scrolling a list view doesn't change the selection. A common scenario: you
look at one of the commits of your current branch; you want to see the how
many'th commit this is, but the beginning of the branch is scrolled off the
bottom of the commits panel. You scroll down to find the beginning of your
branch, but this changes the selection and shows a different commit now - not
what you want.
2. It is possible to scroll a panel that is not the current one without changing
the focus to it. That's how windows in other GUIs usually behave.
We now refresh the staging panel when doing an unscoped refresh, so that if we commit from the staging panel we escape
back to the files panel if need be. But that causes flickering when doing an unscoped refresh from other contexts,
because the refreshStagingPanel function assumes that the staging panel has focus. So we're adding a guard at the top
of that function to early exit if we don't have focus.
When cycling history, we want to make it so that upon returning to the original prompt, you get your text back.
Importantly, we don't want to use the existing preservedMessage field for that because that's only for preserving
a NEW commit message, and we don't want the history stuff of the commit reword flow to overwrite that.
When we use the one panel for the entire commit message, its tricky to have a keybinding both for adding a newline and submitting.
By having two panels: one for the summary line and one for the description, we allow for 'enter' to submit the message when done from the summary panel,
and 'enter' to add a newline when done from the description panel. Alt-enter, for those who can use that key combo, also works for submitting the message
from the description panel. For those who can't use that key combo, and don't want to remap the keybinding, they can hit tab to go back to the summary panel
and then 'enter' to submit the message.
We have some awkwardness in that both contexts (i.e. panels) need to appear and disappear in tandem and we don't have a great way of handling that concept,
so we just push both contexts one after the other, and likewise remove both contexts when we escape.
This begins a big refactor of moving more code out of the Gui struct into contexts, controllers, and helpers. We also move some code into structs in the
gui package purely for the sake of better encapsulation
When cycling history, we want to make it so that upon returning to the original prompt, you get your text back.
Importantly, we don't want to use the existing preservedMessage field for that because that's only for preserving
a NEW commit message, and we don't want the history stuff of the commit reword flow to overwrite that.
When we use the one panel for the entire commit message, its tricky to have a keybinding both for adding a newline and submitting.
By having two panels: one for the summary line and one for the description, we allow for 'enter' to submit the message when done from the summary panel,
and 'enter' to add a newline when done from the description panel. Alt-enter, for those who can use that key combo, also works for submitting the message
from the description panel. For those who can't use that key combo, and don't want to remap the keybinding, they can hit tab to go back to the summary panel
and then 'enter' to submit the message.
We have some awkwardness in that both contexts (i.e. panels) need to appear and disappear in tandem and we don't have a great way of handling that concept,
so we just push both contexts one after the other, and likewise remove both contexts when we escape.
This fixes two problems with the "amend commit with staged changes" command:
1. Amending to a fixup commit didn't work (this would create a commmit with the
title "fixup! fixup! original title" and keep that at the top of the branch)
2. Unrelated fixup commits would be squashed too.
The added integration test verifies that both of these problems are fixed.
We already show "merge" todo entries when starting an interactive rebase with
--rebase-merges outside of lazygit. Changing the type of a merge entry to "pick"
or "edit" doesn't make sense and shouldn't be allowed. Earlier in this branch we
have started to show "update-ref" entries, these can't be changed either (they
can be moved, though).
You might argue that it should be possible to change them to "drop", but in the
case of "update-ref" this doesn't make sense either, because "drop" needs a Sha
and we don't have one here. Also, you would then be able to later change it back
to "pick", so we would have to remember that this isn't allowed for this
particular drop entry; that's messy, so just disallow all editing.
It used to work on the assumption that rebasing commits in lazygit's model
correspond one-to-one to lines in the git-rebase-todo file, which isn't
necessarily true (e.g. when users use "git rebase --edit-todo" at the custom
command prompt and add a "break" between lines).
The main reason for doing this (besides the reasons given for Status in the
previous commit) is that it allows us to easily convert from TodoCommand to
Action and back. This will be needed later in the branch. Fortunately,
TodoCommand is one-based, so this allows us to add an ActionNone constant with
the value 0.
The "open" command is supposed to behave in the same way as double-clicking a
file in the Finder/Explorer. The concept of jumping to a specific line in the
file doesn't make sense for this; use "edit" instead.
Previously we would have tried to do the rebase, resulting in a long and
somewhat cryptic error message from git; now we check ourselves and show a less
intimidating message.
We are going to add one more flag in the next commit.
Note that we are not using the struct inside patch_manager.go; we keep passing
the individual flags there. The reason for this will become more obvious later
in this branch.
It's not so much the total number of commits that matters here, it's just
whether we are on the first one. (This includes the other condition.)
This allows us to get rid of the condition in rebase.go.
Instead of rebasing from the commit below the current one and then setting the
current one to "edit", we rebase from the current one and insert a "break" after
it. In most cases the behavior is exactly the same as before, except that the
new method also works if the current commit is a merge commit. This is useful if
you want to create a new commit at the very beginning of your branch (by editing
the last commit before your branch).
We already have this very convenient behavior of jumping to the next stageable
line after staging something. However, while this worked well for staging
single lines or hunks, it didn't work correctly when staging a range of lines;
in this case we want to start searching from the first line of the range.
The 8.2 release of OpenSSH added support for FIDO/U2F hardware
authenticators, which manifests in being able to create new types of SSH
key, named `ecdsa-sk` nad `ed25519-sk`. This is relevant to lazygit,
as those SSH keys can be used to authorise git operations over SSH, as
well as signing git commits. Actual code changes are required for
correct support, as the authentication process for these types of keys
is different than the process for types supported previously.
When an operation requiring credentials is initialised with a U2F
authenticator-backed key, the first prompt is:
Enter PIN for ${key_type} key ${path_to_key}:
at which point the user is supposed to enter a numeric (and secret) PIN,
specific to the particular FIDO/U2F authenticator using which the SSH
keypair was generated. Upon entering the correct key, the user is
supposed to physically interact with the authenticator to confirm
presence. Sometimes this is accompanied by the following text prompt:
Confirm user presence for key ${key_type} ${key_fingerprint}
This second prompt does not always occur and it is presumed that the
user will know to perform this step even if not prompted specifically.
At this stage some authenticator devices may also begin to blink a LED
to indicate that they're waiting for input.
To facilitate lazygit's interoperability with these types of keys, add
support for the first PIN prompt, which allows "fetch", "pull", and
"push" git operations to complete.
test: add an integration test for checkout branch by name
fix: fix full ref name of detached head
refactor: refactor current branch loader
chore: use field name explicitly
