... and when recalling a commit message from an old commit by pressing up-arrow.
This is necessary because committing turns our soft line breaks into real ones,
but when rewording we want to turn them back into soft ones again, so that it's
possible to insert words at the beginning of a paragraph and have everything
rewrap nicely.
This is only a best effort; the algorithm only removes those hard line breaks
that can be removed without changing the way the message looks. This works well
when the previous commit message was wrapped at the same width, which for most
users should be the most common case; but if it wasn't, the result is not great.
Specifically, if the old wrap width was smaller, some hard line breaks just
won't be removed; if it was wider though, you'll get an unpleasant comb effect
with alternating long and short lines. In such a case it's best to switch to the
editor and use whatever wrapping features you have there (e.g. alt-Q).
This should arguably have been done in b133318b40 already; it's becoming more
important now because we're going to extend the common code with more logic in
the next commit.
It starts a rebase on the bottom-most commit of the range, and sets all the
selected commits to "edit" (skipping merge commits, because they can't be
edited).
To do that, change the "Apply fixup commits" command to show a menu with the two
choices "in current branch" and "above the selected commit"; we make "in current
branch" the default, as it's the more useful one most of the time, even though
it is a breaking change for those who are used to "shift-S enter" meaning
"squash above selected".
This adds a bunch of tooltips to keybindings and updates some keybinding descriptions (i.e. labels).
It's in preparation for displaying more keybindings on-screen (in the bottom right of the screen),
and so due in part to laziness it shortens some descriptions so that we don't need to manage both
a short and long description (for on-screen vs in-menu). Nonetheless I've added a ShortDescription
field for when we do want to have both a short and long description.
You'll notice that some keybindings I deemed unworthy of the options view have longer descriptions,
because I could get away with it.
This is useful if you want to move a range of commits, so you select them, and
then realize it's better to do it in an interactive rebase. Pressing 'i'
preserves the range now.
We want to show an error when the user tries to invoke an action that expects only
a single item to be selected.
We're using the GetDisabledReason field to enforce this (as well as DisabledReason
on menu items).
I've created a ListControllerTrait to store some shared convenience functions for this.
The only time we should call SetSelectedLineIdx is when we are happy for a
select range to be retained which means things like moving the selected line
index to top top/bottom or up/down a page as the user navigates.
But in every other case we should now call SetSelection because that will
set the selected index and cancel the range which is almost always what we
want.
Because we obtain disabled reasons after every action, we need to keep the code for doing so
super fast. As such, we should not be hitting the filesystem to get rebase state, instead
we should just get the cached state.
I feel like we should actually be using the cached state everywhere like we do with all
our other models if only for the sake of consistency.
A common issue I have is that I want to move a commit from the top of my branch
all the way down to the first commit on the branch. To do that, I need to navigate
down to the first commit on my branch, press 'e' to start an interactive rebase,
then navigate back up to the top of the branch, then move my commit back down to
the base. This is annoying.
Similarly annoying is moving the commit one-by-one without explicitly starting
an interactive rebase, because then each individual step is its own rebase which
takes a while in aggregate.
This PR allows you to press 'i' from the commits view to start an interactive
rebase from an 'appropriate' base. By appropriate, we mean that we want to start
from the HEAD and stop when we reach the first merge commit or commit on the main
branch. This may end up including more commits than you need, but it doesn't make
a difference.
Add co-author to commits
Add addCoAuthor command for commits
- Implement the `addCoAuthor` command to add co-authors to commits.
- Utilize suggestions helpers to populate author names from the suggestions list.
- Added command to gui at `LocalCommitsController`.
This commit introduces the `addCoAuthor` command, which allows users to easily add co-authors to their commits. The co-author names are populated from the suggestions list, minimizing the chances of user input errors. The co-authors are added using the Co-authored-by metadata format recognized by GitHub and GitLab.
This fixes two minor problems with the prompts:
1. When pressing shift-A in the local commits view, it would first prompt
whether to stage all files, and then it would prompt whether to amend the
commit at all. This doesn't make sense, it needs to be the other way round.
2. When pressing shift-A on the head commit in an interactive rebase, we would
ask whether they want to amend the last commit, like when pressing shift-A in
the files view. While this is technically correct, the fact that we're
amending the head commit in this case is just an implementation detail, and
from the user's point of view it's better to use the same prompt as we do for
any other commit.
To fix these, we remove the confirmation panel from AmendHelper.AmendHead() and
instead add it at the two call sites, so that we have more control over this.
When editing a commit, the index of the current commit can change; for example,
when merge commits are involved, or when working with stacked branches where
"update-ref" commands may be added above the selected commit.
Reselect the current commit after pressing "e"; this requires doing the refresh
blocking on the main thread. (Another option that I considered was to use a
SYNC refresh, and then select the new line with an OnUIThread inside the Then
function. This also works, but results in a very visible lag.)
This is useful for when you begin to type the message in lazygit's commit panel,
and then realize that you'd rather use your editor's more powerful editing
capabilities. Pressing <c-o> will take you right there.
This allows to do the equivalent of "git rebase --onto <target> <base>", by
first marking the <base> commit with the new command, and then selecting the
target branch and invoking the usual rebase command there.
We are in the outsideFilterModeBindings section here; all of these handlers are
wrapped in a OutsideFilterMode guard in a loop below. No need to add one
manually here.
Previously we used a single-line prompt for a tag annotation. Now we're using the commit message
prompt.
I've had to update other uses of that prompt to allow the summary and description labels to
be passed in
The global counter approach is easy to understand but it's brittle and depends on implicit behaviour that is not very discoverable.
With a global counter, if any goroutine accidentally decrements the counter twice, we'll think lazygit is idle when it's actually busy.
Likewise if a goroutine accidentally increments the counter twice we'll think lazygit is busy when it's actually idle.
With the new approach we have a map of tasks where each task can either be busy or not. We create a new task and add it to the map
when we spawn a worker goroutine (among other things) and we remove it once the task is done.
The task can also be paused and continued for situations where we switch back and forth between running a program and asking for user
input.
In order for this to work with `git push` (and other commands that require credentials) we need to obtain the task from gocui when
we create the worker goroutine, and then pass it along to the commands package to pause/continue the task as required. This is
MUCH more discoverable than the old approach which just decremented and incremented the global counter from within the commands package,
but it's at the cost of expanding some function signatures (arguably a good thing).
Likewise, whenever you want to call WithWaitingStatus or WithLoaderPanel the callback will now have access to the task for pausing/
continuing. We only need to actually make use of this functionality in a couple of places so it's a high price to pay, but I don't
know if I want to introduce a WithWaitingStatusTask and WithLoaderPanelTask function (open to suggestions).
When stopping in a rebase because of a conflict, it is nice to see the commit
that git is trying to apply. Create a fake todo entry labelled "conflict" for
this, and show the "<-- YOU ARE HERE ---" string for that one (in red) instead
of for the real current head.
We have not been good at consistent casing so far. Now we use 'Sentence case' everywhere. EVERYWHERE.
Also Removing 'Lc' prefix from i18n field names: the 'Lc' stood for lowercase but now that everything
is in 'Sentence case' there's no need for the distinction.
I've got a couple lower case things I've kept: namely, things that show up in parentheses.
By constructing an arg vector manually, we no longer need to quote arguments
Mandate that args must be passed when building a command
Now you need to provide an args array when building a command.
There are a handful of places where we need to deal with a string,
such as with user-defined custom commands, and for those we now require
that at the callsite they use str.ToArgv to do that. I don't want
to provide a method out of the box for it because I want to discourage its
use.
For some reason we were invoking a command through a shell when amending a
commit, and I don't believe we needed to do that as there was nothing user-
supplied about the command. So I've switched to using a regular command out-
side the shell there
When cycling history, we want to make it so that upon returning to the original prompt, you get your text back.
Importantly, we don't want to use the existing preservedMessage field for that because that's only for preserving
a NEW commit message, and we don't want the history stuff of the commit reword flow to overwrite that.
