This change reduces the number of calls during application startup to
one, calling GetRepoPaths() earlier than previously and plumbing the
repoPaths struct around to achieve this end.
- **PR Description**
* Fixesjesseduffield/lazygit#1363
* Allow switching between up two three log views
Seeing as the last activity related to this issue was over a year ago, I
decided to take a stab at this.
The implementation should be fully backwards compatible. Simply add
`allBranchesLogCmdAlt1` and/or `allBranchesLogCmdAlt2` to your config
file to use them when cycling between log commands using 'a'.
You can even use `allBranchesLogCmdAlt2` together with
`allBranchesLogCmd` (skipping `allBranchesLogCmdAlt1`) if you want, it
should not affect usability.
This is my first contribution to LazyGit, but I have experience with Go.
Changes:
- Introduced two new optional user config commands,
allBranchesLogCmdAlt1+2
- When pressing 'a' in the Status view, cycle between non-empty,
non-identical log commands
- There will always be at least one command to run, since
allBranhesLogCmd has a default
- **Please check if the PR fulfills these requirements**
* [x] Cheatsheets are up-to-date (run `go generate ./...`)
* [x] Code has been formatted (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#code-formatting))
* [x] Tests have been added/updated (see
[here](https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md)
for the integration test guide)
* [ ] Text is internationalised (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#internationalisation))
* [ ] Docs (specifically `docs/Config.md`) have been updated if
necessary
* [x] You've read through your own file changes for silly mistakes etc
<!--
Be sure to name your PR with an imperative e.g. 'Add worktrees view'
see https://github.com/jesseduffield/lazygit/releases/tag/v0.40.0 for
examples
-->
- Introduced a new optional user config command, allBranchesLogCmds
- When pressing 'a' in the Status view, cycle between non-empty, non-identical log commands
- There will always be at least one command to run, since allBranhesLogCmd has a default
- Update documentation & write an integration test
- Update translation string
- **PR Description**
I commonly prefix my branch names with my first initial and last name,
such as this one (`ecubit/branch-prefixes`). It can be a bit annoying to
type out.
This PR adds a config option to set a default value for the name in the
branch creation modal.
If there would have previously been a branch name autofilled (I do not
know all such cases), this change has no effect.
- **Please check if the PR fulfills these requirements**
* [x] Cheatsheets are up-to-date (run `go generate ./...`)
* [x] Code has been formatted (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#code-formatting))
* [x] Tests have been added/updated (see
[here](https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md)
for the integration test guide)
* [ ] Text is internationalised (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#internationalisation))
- `CONTRIBUTING.md` says I may submit without doing localization (and I
am unable)
* [x] Docs (specifically `docs/Config.md`) have been updated if
necessary
* [x] You've read through your own file changes for silly mistakes etc
### Overview
| Current Behaviour | New Behaviour |
|--|--|
| Local branches will **always** track the remote branches they were
created from. | Local branches will track the remote branches they were
created from **only if their names match**. |
### Description
The current behaviour when creating a new branch off of a remote branch
is to always track the branch it was created from.
For example, if a branch 'my_branch' is created off of the remote branch
'fix_crash_13', then 'my_branch' will be tracking the remote
'fix_crash_13' branch.
It is common practice to have both the local and remote branches named
the same when the local is tracking the remote one. Therefore, it is
reasonable to expect that 'my_branch' should not track the remote
'fix_crash_13' branch.
The new behaviour when creating a new branch off of a remote branch is
to track the branch it was created from only if the branch names match.
If the branch names DO NOT match then the newly created branch will not
track the remote branch it was created from.
For example, if a user creates a new branch 'fix_crash_13' off of the
remote branch 'fix_crash_13', then the local 'fix_crash_13' branch will
track the remote 'fix_crash_13' branch.
However, if the user creates a new branch called 'other_branch_name' off
of the remote branch 'fix_crash_13', then the local 'other_branch_name'
branch will NOT track the remote 'fix_crash_13' branch.
- **Please check if the PR fulfills these requirements**
* [x] Cheatsheets are up-to-date (run `go generate ./...`)
* [x] Code has been formatted (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#code-formatting))
* [x] Tests have been added/updated (see
[here](https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md)
for the integration test guide)
* [ ] Text is internationalised (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#internationalisation))
* [ ] Docs have been updated if necessary
* [x] You've read through your own file changes for silly mistakes etc
The current behaviour when creating a new branch off of a remote branch
is to always track the branch it was created from.
For example, if a branch 'my_branch' is created off of the remote branch
'fix_crash_13', then 'my_branch' will be tracking the remote
'fix_crash_13' branch.
It is common practice to have both the local and remote branches named
the same when the local is tracking the remote one. Therefore, it is
reasonable to expect that 'my_branch' should not track the remote
'fix_crash_13' branch.
The new behaviour when creating a new branch off of a remote branch is
to track the branch it was created from only if the branch names match.
If the branch names DO NOT match then the newly created branch will not
track the remote branch it was created from.
For example, if a user creates a new branch 'fix_crash_13' off of the
remote branch 'fix_crash_13', then the local 'fix_crash_13' branch will
track the remote 'fix_crash_13' branch.
However, if the user creates a new branch called 'other_branch_name' off
of the remote branch 'fix_crash_13', then the local 'other_branch_name'
branch will NOT track the remote 'fix_crash_13' branch.
No content changes yet, because nobody has edited anything in Crowdin so far.
However, this changes a few `\u003` to `<` (pretty sure that was an artefact of
how we manually generated the json files in #3649), and it removes all the
translations that are identical to the English version, which I guess is a good
thing (but doesn't make a difference in practice).
I was looking for empty strings in en.json, that's how I found this one. It
resulted in an empty log entry when adding a co-author to an existing commit.
Fix two problems with running `go generate ./...` on Windows:
- the command would error out with `panic: Default config starting
comment not found` (depending on the setup of the local git client)
- after running the command, all files would show up as modified in git,
but without a diff. Staging the files would make them disappear again,
except for those that actually had changes.
Fix both of these by configuring git to check out the generated text
files with Unix line endings.
This tells git to checkout all .md and .json files with Unix line feeds,
even on Windows. This shouldn't be a problem for working with these
files on Windows, as all modern text editors and IDEs should be capable
of editing Unix files transparently; but it makes it possible to run
`go generate ./...` on Windows, which assumes Unix line feeds in a few
places.
On Windows, trying to use lazygit with a language other than English
would result in the error message `open translations\ja.json: file does
not exist`.
It seems that the embed.FS always uses foreward slashes, even on
Windows.
This not only affected generating the cheatsheets, but also loading a
translation file in production.
The default shortcut to open git difftool (`ctrl+t`) is not available on
the "Local Branches" window. It is available when selecting a commit
from a local branch, a remote branch, or a tag from the "Local Branches"
window.
This is inconsistent since branches or tags are also commits, the
shortcut should also work on them directly.
This commit remedies this inconsistency by allowing the use of the
shortcut directly on a branch or a tag. The shortcut works both in the
"standard" mode and the "diffing" mode.
The default shortcut to open git difftool (ctrl+t) is not available on
the "Local Branches" window. It is available when selecting a commit
from a local branch, a remote branch, or a tag from the "Local Branches"
window.
This is inconsistent since branches or tags are also commits, the
shortcut should also work on them directly.
This commit remedies this inconsistency by allowing the use of the
shortcut directly on a branch or a tag. The shortcut works both in the
"standard" mode and the "diffing" mode.
This reverts commit 3af545daf7cf6458e8efd324012047ce688f08e6, reversing
changes made to 629b7ba1b8f634c26adad43ffe44ed601d652f0c.
We changed our mind about this and want to provide different options for
achieving the same thing, but with more flexibility.
- **PR Description**
The highlight is normally turned off in HandleFocusLost, but that's not
called when using ReplaceContext (and changing this would be a lot of
work, it seems), so turn it off manually for now.
For a moment I considered whether we want to show the new inactive
highlight when switching from suggestions to the prompt (actually this
did happen on master), but I decided against it for several reasons:
- it's not quite the right concept (the suggestions view is not the
"parent" context of the prompt),
- there's no benefit from seeing one of the suggestions selected (and
the selection would change arbitrarily when changing the filter string)
- there would be visual problems when the suggestions become empty, in
which case we would still highlight the first empty row (which you can
only see if you set the gui.theme.inactiveViewSelectedLineBgColor config
to some color). Now this could be considered a bug in the focus
management of the suggestions panel, but it doesn't seem worth fixing
this; the problem goes away by turning off the highlight.
The highlight is normally turned off in HandleFocusLost, but that's not called
when using ReplaceContext (and changing this would be a lot of work, it seems),
so turn it off manually here for now.
- **PR Description**
A filtered view would show stale data when the model changes but the
view is inactive. I think this could only happen when changing some git
state outside of lazygit; for example, when creating a new branch while
the branches panel has a filter set, but doesn't have the focus. (See
the added test for an example.)
