We will need this because under some conditions we are going to use this
function to edit a range of commits, and we can't set merge commits to "edit".
This corresponds to the code in startInteractiveRebaseWithEdit which has similar
logic.
It is a bit unfortunate that we will have these two different ways of setting
todos to edit: startInteractiveRebaseWithEdit does it after stopping in the
rebase, in the Then function of its refresh, but InteractiveRebase does it in
the daemon with a ChangeTodoActionsInstruction. It still makes sense though,
given how InteractiveRebase works.
This not only affects "edit", but also "drop", "fixup", and "squash".
Previously, when trying to use these for a range selection that includes a merge
commit, they would fail with the cryptic error message "Some todos not found in
git-rebase-todo"; now they simply exclude the merge commit. I'm not sure if one
is better or worse than the other, and we should probably simply disable the
commands when a merge commit is selected, but that's out of scope in this PR.
This is very similar to edit_range_select_outside_rebase.go, except that it
selects commits right after, and including, a merge commit.
This test already works correctly. The reason we add it is that we are going to
have two different implementations of the `e` command depending on whether the
last selected commit is a merge commit, and we want to make sure they both work
with a range selection.
Auto-amending is a little-known feature of git that is very convenient once you
know it: whenever you stop at a commit marked with `edit` in an interactive
rebase, you can make changes and stage them, and when you continue the rebase
they automatically get amended to the commit you had stopped at. This is so
convenient because making changes to a commit is one of the main reasons why you
edit a commit.
Unfortunately this currently doesn't work in lazygit because we don't actually
use `edit` to stop at the first commit (instead, we add a `break` todo after it,
which doesn't have the auto-amend functionality).
We'll improve this later in this branch.
- **PR Description**
This allows range-selecting multiple branches and deleting them all at
once. We allow deleting remote branches (or local and remote branches)
as long as *all* selected branches have one.
We show the warning about force-deleting as soon as at least one of the
selected branches is not fully merged.
We allow deleting remote branches (or local and remote branches) only if *all*
selected branches have one.
We show the a warning about force-deleting as soon as at least one of the
selected branches is not fully merged.
The added test only tests a few of the most interesting cases; I didn't try to
cover the whole space of possible combinations, that would have been too much.
Since we want to select multiselections, this will make it easier to pass a
slice of remote branches. It does require that for the case of the local
branches panel we need to synthesize a RemoteBranch object from the selected
local branch, but that's not hard.
- **PR Description**
Mouse wheel scrolling of the custom patch view worked *unless* a file
(as opposed to a directory) is selected in the commit files view.
Mouse wheel scrolling of the custom patch view worked *unless* a file (as
opposed to a directory) is selected in the commit files view. The reason was an
obvious typo in the AttachControllers call.
This code had a lot of logic that (fortunately) didn't work because it was
buggy:
- it was supposed to wait for the auto-fetch delay before fetching for the first
time in case we start with a repo that we had open in a previous session (i.e.
that appears in the recent repos list). This code actually ran always, not
just for known repos, because the IsNewRepo flag is only set later, after this
function runs. Fortunately, the code didn't work, because time.After starts a
timer but doesn't wait for it (to do that, it would have to be
`<-time.After`).
- if the first fetch fails with error 128, it was supposed to show an error
message and not start the background fetch loop. Fortunately, this didn't work
because 1) it was guarded by isNew which is always false here, and 2) because
git's error message in this case is actually "exit code: 128", not "exit
status 128" (maybe this has changed in git at some point).
I find both of these undesirable. Whenever I open a repo I want an auto-fetch to
be triggered immediately to get my branch information up to date as quickly as
possible. And if the initial fetch fails (e.g. because one of my remotes is
offline or doesn't exist any more), then that's no reason not to start the
auto-fetch loop anyway.
So let's simplify the code to do what it did before, but with much fewer lines
of code.
Original commit message of the gocui change:
This fixes View.Size, Width and Height to be the correct (outer) size of a view
including its frame, and InnerSize/InnerWidth/InnerHeight to be the usable
client area exluding the frame. Previously, Size was actually the InnerSize (and
a lot of client code used it as such, so these need to be changed to InnerSize).
InnerSize, on the other hand, was *one* less than Size (not two, as you would
have expected), and in many cases this was made up for at call sites by adding 1
(e.g. in calcRealScrollbarStartEnd, parseInput, and many other places in the
lazygit code).
There are still some weird things left that I didn't address here:
- a view's lower-right coordinates (x1/y1) are one less than you would expect.
For example, a view with a 2x2 client area like this:
╭──╮
│ab│
│cd│
╰──╯
in the top-left corner of the screen (x0 and y0 both zero) has x1/xy at 3, not
4 as would be more natural.
- a view without a frame has its coordinates extended by 1 on all sides; to
illustrate, the same 2x2 view as before but without a frame, sitting in the
top-left corder of the screen, has coordinates x0=-1, y0=-1, x1=2, y1=2. This
is highly confusing and unexpected.
I left these as they are because they would be even more of a breaking change,
and also because they don't have quite as much of an impact on general app code.
- **PR Description**
Some editors add one automatically when saving the file, which causes
confusion and ugly diffs containing `\ No newline at end of file`.
When creating a PR against a selected branch (via O = "create pull
request
options"), the user will first be asked to select a remote (if there is
more
than one). After that, the suggestion area is populated with all remote
branches
at that origin - instead of all local ones. After all, creating a PR
against a
branch that doesn't exist on the remote won't work.
Please note that for the "PR is not filed against 'origin' remote" use
case
(e.g. when contributing via a fork that is 'origin' to a GitHub project
that is
'upstream'), the opened URL will not be correct. This is not a
regression and
will be fixed in an upcoming PR.
Fixes#1826.
When creating a PR against a selected branch (via O = "create pull request
options"), the user will first be asked to select a remote (if there is more
than one). After that, the suggestion area is populated with all remote branches
at that origin - instead of all local ones. After all, creating a PR against a
branch that doesn't exist on the remote won't work.
Please note that for the "PR is not filed against 'origin' remote" use case
(e.g. when contributing via a fork that is 'origin' to a GitHub project that is
'upstream'), the opened URL will not be correct. This is not a regression and
will be fixed in an upcoming PR.
Fixes#1826.
- **PR Description**
Found that the method to pull the latest tarball for the project was
incorrect. This pull request fixes the instructions in the Ubuntu
section of the Readme.
Simple fix to README.md
# **PR Description**
## Problem this PR attempts to solve
I really appreciate the feature added in #3794 that allows switching
tabs using panel jump keys when the side panel is already active and see
how it is convenient for many users. However, after using lazygit for
quite some time, I've developed muscle memory where I rely on pressing a
number key to instantly switch to a panel and perform an action,
regardless of which panel is currently active. I have found myself
several times in the past few days clicking '2' and going to hit 'a' +
'c' to commit all and find I was already had window 2 active and my tab
was instead switched to 'Worktrees' and the keybindings no longer apply
to stage or commit.
## Solution
- Add a config `SwitchTabsWithPanelJumpKeys` as a gui boolean that is
true by default, keeping the current new behavior added by #3794
- When `SwitchTabsWithPanelJumpKeys` is set to false in the user's
config, the old behavior is returned which does not switch tabs using
the side panel jump keys.
- This is behavior is verified with an integration test with
``SwitchTabsWithPanelJumpKeys` set to false that shows the expected
behavior that jumping to window 2 while window 2 is already active does
not switch tabs within window 2
To disable switching tabs with panel jump keys, add the following to
your config.yml:
```yaml
gui:
# If true, when using the panel jump keys (default 1 through 5) and target panel is already active, go to next tab instead
switchTabsWithPanelJumpKeys: false
```
### P.S.
This is my first contribution to lazygit and while I absolutely strived
to read all documentation and follow all standards, I accept that this
PR may not be perfect and am very open to feedback and suggestions to
improve both this code and any future contributions. I absolutely love
lazygit, I use it everyday and swear by it as the most powerful and
efficient tool for managing git, I love and appreciate all the work all
the maintainers do to constantly improve it. So thank you to all who are
reading this and I look forward to contributing more to make lazygit
even more of the best git tool available!
* [x] Cheatsheets are up-to-date (run `go generate ./...`)
* [x] Code has been formatted (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#code-formatting))
* [x] Tests have been added/updated (see
[here](https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md)
for the integration test guide)
* [ ] No text rendered to user -> Text is internationalised (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#internationalisation))
* [x] If a new UserConfig entry was added, make sure it can be
hot-reloaded (see
[here](https://github.com/jesseduffield/lazygit/blob/master/docs/dev/Codebase_Guide.md#using-userconfig))
* [x] Docs have been updated if necessary
* [x] You've read through your own file changes for silly mistakes etc
<!--
Be sure to name your PR with an imperative e.g. 'Add worktrees view'
see https://github.com/jesseduffield/lazygit/releases/tag/v0.40.0 for
examples
-->
This is both a bug fix and a behavior change:
- The bug fix is that when entering the staging view for a selected file
by clicking in the main view, and the main view was scrolled down, then
it would scroll to the top and show an ugly range selection from the
line that was clicked to the line that is now under the mouse after
scrolling up.
- The behavior change is that when leaving the staging view by pressing
escape, it now retains its scroll position rather than scrolling back up
to the top.
In addition, this fixes a minor flickering issue when leaving the
staging view.
Note that maintaining the scroll position when going into and out of the
staging view is not always perfect for two reasons:
- the focused staging view does not wrap long lines, but the unfocused
one does
- a pager like delta might change the number of lines e.g. of the diff
hunks
For the second problem there's little we can do, but the first one will
be improved once we wrap lines in the focused staging view (see #1384
and #3558), which I'm currently working on.
- **Please check if the PR fulfills these requirements**
* [x] Cheatsheets are up-to-date (run `go generate ./...`)
* [x] Code has been formatted (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#code-formatting))
* [ ] Tests have been added/updated (see
[here](https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md)
for the integration test guide)
* [ ] Text is internationalised (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#internationalisation))
* [ ] If a new UserConfig entry was added, make sure it can be
hot-reloaded (see
[here](https://github.com/jesseduffield/lazygit/blob/master/docs/dev/Codebase_Guide.md#using-userconfig))
* [ ] Docs have been updated if necessary
* [x] You've read through your own file changes for silly mistakes etc
As far as I understand, this was needed back when the staging context was still
responsible for rendering its highlight (as opposed to the gocui view, as it is
today). It was necessary to call it with isFocused=false so that it removed the
highlight. The isFocused bool is no longer used today (and we'll remove it in
the next commit), so there's no need to render the view here any more.
This fixes flickering when leaving the staging view by pressing escape. The
reason is that in this case the patch state was already set to nil by the time
we get here, so we would render an empty view for a brief moment.
On top of that, it fixes unwanted scrolling to the top when leaving the staging
view. The reason for this is that we have code in layout that scrolls views up
if needed, e.g. because the window got taller or the view content got shorter
(added in #3839). This kicked in because we emptied the view, and scrolled it
all the way to the top, which we don't want.
This way it won't scroll to the top; we want this when entering the staging
panel or the patch building panel by clicking into the view, and also when
returning from these views by pressing escape. Note that there's a bug in this
latter case: the focused panel still scrolls to the top when hitting escape, we
will fix this in the next commit.
Change it in the same way for NewRenderStringWithScrollTask, just for
consistency, although it's not really necessary there. We use this function only
for focusing the merge conflict view, and in that case we already have an empty
task key before and after, so it doesn't change anything there.
When clicking in a single-file diff view to enter staging (or custom patch
editing, when coming from the commit files panel), and then pressing shift-down
or shift-up to select a range, it would move the selected line rather than
creating a range. Only on the next press would it start to select a range from
there.
This is very similar to the fix we made for pressing escape in 0e4d266a52.
When clicking in the main view to enter staging, and then pressing shift-down to
select a range, it moves the selection rather than selecting a two-line range.
We'll fix this in the next commit.
So far we only had tests that called Click() only once. If you have a test that
calls Click twice (we'll add one in the next commit), you'll notice that the
second click is interpreted as a drag because the mouse button wasn't released
in between. Fix this by sending a "mouse-up" event after the click.
After pasting commits once, we hide the cherry-picking status (as if it had been
reset), and no longer paint the copied commits with blue hashes; however, we
still allow pasting them again. This can be useful e.g. to backport a bugfix to
multiple major version release branches.
