* Move connection logic into grpcConnection object
If we will need to maintain more than one connection in future, this
splitting off will come in handy.
Co-authored-by: Stefan Prisca <stefan.prisca@gmail.com>
* Make another channel a signal channel
There is another channel that serves as a one-time signal, where
channel's data type does not matter.
* Reorder and document connection members
This is to make clear that the lock is guarding only the connection
since it can be changed by multiple goroutines, and other members are
either atomic or read-only.
* Move stop signal into connection
The stop channel was rather useless on the exporter side - the primary
reason for existence of this channel is to stop a background
reconnecting goroutine. Since the goroutine lives entirely within
grpcConnection object, move the stop channel here. Also expose a
function to unify the stop channel with the context cancellation, so
exporter can use it without knowing anything about stop channels.
Also make export functions a bit more consistent.
* Do not run reconnection routine when being stopped too
It's possible that both disconnected channel and stop channel will be
triggered around the same time, so the goroutine is as likely to start
reconnecting as to return from the goroutine. Make sure we return if
the stop channel is closed.
* Nil clients on connection error
Set clients to nil on connection error, so we don't try to send the
data over a bad connection, but return a "no client" error
immediately.
* Do not call new connection handler within critical section
It's rather risky to call a callback coming from outside within a
critical section. Move it out.
* Add context parameter to connection routines
Connecting to the collector may also take its time, so it can be
useful in some cases to pass a context with a deadline. Currently we
just pass a background context, so this commit does not really change
any behavior. The follow-up commits will make a use of it, though.
* Add context parameter to NewExporter and Start
It makes it possible to limit the time spent on connecting to the
collector.
* Stop connecting on shutdown
Dialling to grpc service ignored the closing of the stop channel, but
this can be easily changed.
* Close connection after background is shut down
That way we can make sure that there won't be a window between closing
a connection and waiting for the background goroutine to return, where
the new connection could be established.
* Remove unnecessary nil check
This member is never nil, unless the Exporter is created like
&Exporter{}, which is not a thing we support anyway.
* Update changelog
Co-authored-by: Stefan Prisca <stefan.prisca@gmail.com>
* Move global code to toplevel package
* Move version function to toplevel package
* Update changelog
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Add a Shutdown method to api TraceProvider
- sdktraceprovider shutdown span processors
- In examples, replace processosr shutdown with
traceprovider's shutdown
Signed-off-by: Hui Kang <kangh@us.ibm.com>
* remove shutdown in the api provider interface
* Add context in parameter and return error
* handle error in shutdown
* Update CHANGELOG.md
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Update metric Kind to InstrumentKind
* Update all the other modules with Kind rename
* Update metric Descriptor with instrument Kind rename
* Update other modules with Descriptor method rename
* Update OTLP exporter test field name
* Rename kind filenames
* Add changes to CHANGELOG
* Fix documentation for Grouping and PrecomputedSum
* Rename meter.go to metric.go
* Move descriptor.go into metric.go
* Move must.go into metric.go
* Move instruments into metric_instrument.go
* Rename metric api_test.go to metric_test.go
* Move instrumentkind_test.go into metric_test.go
* Rename sdkapi.go metric_sdkapi.go
* Move api/metric into otel
* Update to use moved packages
* Rename otel.go to error_handler.go
* Add changes to CHANGELOG
* Fix merge conflict resolution error
* Move trace API to otel
* Move tracetest to oteltest
* Update package documentation
* Remove old api/trace package
* Lint
* Add changes to CHANGELOG
* Add tests for rest of trace API
* Apply suggestions from code review
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Documentation fixes
Includes resolutions for review issues.
* Correct CHANGELOG post release
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
- add set propagator to examples
Signed-off-by: Hui Kang <kangh@us.ibm.com>
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Rename *Provider names
There is overlap in naming with MeterProviders and TracerProviders. This
is means the specification is not implemented and these types can not
exist in the same package (#1179). This makes each type and related
functions and types explicit.
* Add changes to CHANGELOG
* Update trace export interface
Move to conforming to the specification.
* Update documentation in export trace
* Update sdk trace provider to support new trace exporter
* Update SpanProcessors
Support the Provider changes and new trace exporter.
* Update the SDK to support the changes
* Update trace Provider to not return an error
* Update sdk with new Provider return
Also fix the testExporter ExportSpans method
* Update exporters with changes
* Update examples with changes
* Update Changelog
* Move error handling to end of shutdown
* Update exporter interface
Rename to SpanExporter to match specification. Add an error return value
to the Shutdown method based on feedback. Propagate these changes.
Remove the Stop method from the OTLP exporter to avoid confusion and
redundancy.
* Add test to check OTLP Shutdown honors context
* Add Jaeger exporter test for shutdown
* Fix race in Jaeger test
* Unify shutdown behavior and testing
* Update sdk/trace/simple_span_processor.go
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Move proto to OTLP exporter
* Update OTLP exporter import of proto
* Use gogo protobuf
To stop using the deprecated github.com/golang/protobuf and match what
the collector is doing, switch to generating OTLP with the
github.com/gogo/protobuf/proto instead of
github.com/golang/protobuf/proto.
* Clean dependencies
Remove all protobuf dependencies from otel package and all of its
dependencies.
* Update CHANGELOG
* Clean OTLP exporter go mod
Remove submodule beforehand to avoid unneeded direct dependencies.
* Use default ref for GitHub workflow
* Update path that triggers proto gen action
* Correct license-check exclusion for OTLP
* Update commented location of the OTLP and code
* Clean stale indirect dependency requirements
In the recent changes to isolate the main `otel` package there were many
indirect dependencies of the package that were removed, however, the
go.mod was not automatically cleaned of these. This removes those (and
similar ones in the otel-collector example and otel exporter) and prunes
the go.sum files accordingly.
* Run in a clean system to reproduce build
* Make opentracing bridge into own Go module
* Update dependabot config
* Clean dependencies of project
Now the bridge is a module, clean all upstream modules that no longer
implicitly depend on it.
* Update Changelog
* go mod tidy
http.ResponseWriters may implement additional interfaces
(http.CloseNotifier, http.Flusher, http.Hijacker, http.Pusher,
io.ReaderFrom) that get lost when the ResponseWriter is wrapped in
another object. This change uses the httpsnoop package to wrap the
ResponseWriter so that the resulting object implements any of the
optional interfaces that the original ResponseWriter implements as
well as using the replacement ResponseWriter methods that gather
information for tracing.
* Remove otel/sdk dependency from grpctrace
Use otel/trace/testtrace instead and cleanup testing code.
* Update httptrace to not depend on the SDK
Update testing to use api/trace/testtrace instead.
* Add changes to Changelog
* Make the SDK its own Go module
* Upgrade go.mod to 1.14 project wide
* go mod tidy
* Import open-telemetry/opentelemetry-proto submodule under internal
* Commit changes in updated/new protobuf files
* Refer to new location of .pb.go files after rewrite from import
* Describe in CHANGELOG
* Avoid applying stale udpates; add a test
* Add Memory option to basic processor
* Always use memory in the pull controller
* Test the memory option
* Precommit
* Add a Prometheus-specific test
* More comment on Memory option
* Link to 862
* Remove sleep
* Update changelog
* Comment on stale and stateless aggregators
* Update sdk/metric/processor/basic/config.go
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
Co-authored-by: Liz Fong-Jones <lizf@honeycomb.io>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
