* sdk/trace: add missing options to tracer provider
This change adds `WithDefaultSampler` and `WithSpanLimits` to the tracer
provider and removed `WithConfig` from it.
Before this change, `WithConfig` is the only way to set sampler or
limits of a span. However, it is prone to misuse, since `WithConfig` can
override tracing configurations that are configured by `WithResource` or
`WithIDGenerator`. Thus to fix this, it adds new functional options -
`WithDefaultSampler` and `WithSpanLimits` and removes `WithConfig`.
Resolves#1631.
* Update sdk/trace/provider.go
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Update sdk/trace/provider.go
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* rebase and remove WithConfig
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
The echo for the target was copied from other targets that use `dir` as
an iteration variable which is not what this target uses. That means
that the empty variable `dir` is unexpanded and the unhelpful message of
"build /..." is echoed. This updates the iteration variable to match
other targets and fixes the info messaging.
* chore(zipkin): improves zipkin example to not to depend on timeouts.
* chore: improves variable name
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* chore(zipkin): makes lint happy.
* fix(zipkin): fixes example
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* fix(zipkin): import.
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Add ForceFlush method to TracerProvider
The specification requires that a TracerProvider have a ForceFlush
method that can be set with a timeout, return any error to the caller,
and have all the registered span processors export their spans. This
updates the SpanProcessor.ForceFlush method to accept a context and
return an error and plumbs this method into a new ForceFlush method of
the SDK TracerProvider.
Additionally, this corrects the TracerProvider Shutdown method. This
method as well needs to return to the caller any failure it encounters
according to the specification. This returns an error if it cannot type
assert the spanProcessorStates or if shutting down a span processor
results in an error.
Resolves#1606
* Add changes to changelog
* Apply suggestions from code review
Co-authored-by: Steven E. Harris <seh@panix.com>
* Cancel export context when BSP stops
* Defer cancel call in BSP span processor funcs
Co-authored-by: Steven E. Harris <seh@panix.com>
to provide consistent naming across the code base, deprecate pusher in
favor of exporter naming convention.
Signed-off-by: ldelossa <ldelossa@redhat.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Update the SimpleSpanProcessor
Subsequent calls to OnStart, OnEnd, and ForceFlush should be ignored
gracefully once Shutdown has been called. This implements that behavior
by shutting down the exporter and removing it from the
SimpleSpanProcessor so subsequent calls to OnEnd will be no-ops.
* Add changes to changelog
* Lock in sync.Once of shutdown instead of Shutdown scope
* Update CHANGELOG.md
Co-authored-by: Steven E. Harris <seh@panix.com>
* Release exporterMu before shutdown exporter
* Move changes to unreleased section of changelog
* Update simple_span_processor.go
revert comment change from merge
Co-authored-by: Steven E. Harris <seh@panix.com>
* Fix#1658 SpanStatus description set only when status code is set to error
* Update CHANGELOG.md
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Set span status code, message and ref types according to the spec
* Serialize array attributes as string
* Use correct lib name / version key
* Add new and adjust existing tests
* Update CHANGELOG
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Add tests for propagation of Sampler Tracestate changes
Sampler specification indicates that SamplingResult.Tracestate
should be associated with the SpanContext of the newly created span.
See
https://github.com/open-telemetry/opentelemetry-specification/blob/main/specification/trace/sdk.md#sampler
* Fix SamplingResult TraceState propagation
* Add Changelog entry
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Add HTTP/JSON to the otlp exporter
Co-Authored-By: Roy van de Water <72016+royvandewater@users.noreply.github.com>
* PR fixup
Co-authored-by: Roy van de Water <72016+royvandewater@users.noreply.github.com>
* Add compatibility tests to CI
* Increase timeout to 60s
Some of the aggregator tests are running just over 30 seconds when
testing on Windows. Bump this to allow for it.
* Remove cache setup jobs
Having a unified job setup the cache when none exists so packages are
only downloaded once is ideal, but these steps are taking too long. In
some situations they are doubling the run time. Remove them and prefer
to have multiple downloads when dependencies change.
* Add changes to changelog
* Remove mod-download target from Makefile
Unused now that the cache jobs are removed.
* Add compatibility testing table to changelog
* Add change about precommit to changelog
* Update README
* Correct examples target in lint job
* Make timestamps sequential in lastvalue agg check
* Set PR number in changelog
* Fix location of sleep
The lastvalue timestamp is set on update. Correct the location of the
sleep to bridge the update of the two different aggregators.
* Updating documentation with an working example for creating NewExporter
* Updated Changelog
* Moved examples in README to testing example
* ExampleTest shouldn't log anything if working as expected
* Fixing the lint
* Fixing the lint
* Review comments
* Changes done moved to Fixed section of Changelog
* Fix Windows build of Jaeger tests
The Jaeger tests use the low-level syscall package. The Windows specific
function called in that package has a different function signature than
the unix version. Add a windows specific file using the build flags to
isolate this OS specific functionality.
* Add changes to changelog
* Blind succeed to account for unimplemented functionality on Windows
* Fix stdout TestStdoutTimestamp failure with sleep
Ensure the test condition is valid by introducing minimal sleep
durations before and after a timestamp is measured.
Resolves#1571
* Add changes to changelog
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Stagger timestamps in exact aggregator tests
Fixes#1559.
* Missed one
* Yield while you wait
* Just sleep for a teeny tiny bit
* Oops, wrong PR in Changelog
* Make sure that *some* time passes
* Keep time comparisons relaxed
* add code attributes to semconv package
* update changelog
* update comment for code semconv attributes
Adds a full-stop at the end of the comment.
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Vendor Thrift dependency
* Fix build
* Changelog entry
* Ignore third_party for coverage purposes
* Re-run tests
* Re-run tests
* Re-run tests
* Re-run tests
* Relax time comparisons
Fixes#1559.
Some unit tests were flaking in CI because they expected the timestamp
to advance during a test, when it's possible for it to be unchanged
instead. This change switches the offending "<" comparisons to "<=".
* Re-run tests
* Relax more time comparisons
* Re-run tests
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
The spec makes it optional to attempt resampling when changing the name
of a span and we're not sure whether it can be done in an appropriate
manner, so it's best to not do it at all for now. We can try again
later if we find a good way to do it.
* Document SDK span ending stops recording
* Guard SDK span set methods with record check
* Document SDK span exported API
Make note of methods that do nothing if span is not recording.
* Document SDK span End recording check
* Document the SetName method
