Previous, 'foo/**' would match 'foo', but it shouldn't have. In this
case, not matching 'foo' is what is documented and also seems consistent
with other recursive globbing implementations (like that in zsh).
This also updates the prefix extractor to pull 'foo/' out of 'foo/**'.
Closes#1756
This seems like an obvious optimization but becomes critical when
filesystem operations even as simple as stat can result in significant
overheads; an example of this was a bespoke filesystem layer in Windows
that hosted files remotely and would download them on-demand when
particular filesystem operations occurred. Users of this system who
ensured correct file-type fileters were being used could still get
unnecessary file access resulting in large downloads.
Fixes#1657, Closes#1660
In the case where after-context is requested with a match count limit,
we need to be careful not to reset the state tracking the remaining
context lines.
Fixes#1380, Closes#1642
Previously, we were only looking for the UTF-16 BOM for determining
whether to do transcoding or not. But we should also look for the UTF-8
BOM as well.
Fixes#1638, Closes#1697
This is somewhat non-standard, but it seems nice on the surface: short
flag names are in short supply, --hidden is probably somewhat common and
-. has an obvious connection with how hidden files are named on Unix.
Closes#1680
This fixes a bug where it was assumed that 'is_suffix' when CRLF
handling was enabled mean that '\r\n' was present. But that's not the
case, and it is intentional that 'is_suffix' only looks for '\n'. (Which
is why #1803 wasn't taken, which tries to fix this by changing
'is_suffix'.)
Fixes#1765, Closes#1803
This was once part of ripgrep, but at some point, was unintentionally
removed. The value of this warning is that since ripgrep tries to be
"smart" by default, it can be surprising if it doesn't search certain
things. This warning covers the case when ripgrep searches *nothing*,
which happens somewhat more frequently than you might expect. e.g., If
you're searching within an ignore directory.
Note that for now, we only print this message when the user has not
supplied any explicit paths. It's not clear that we want to print this
otherwise, and in particular, it seems that the message shows up too
eagerly. e.g., 'rg foo does-not-exist' will both print an error about
'does-not-exist' not existing, *and* the message about no files being
searched, which seems annoying in this case. We can always refine this
logic later.
Fixes#1404, Closes#1762
This also replaces '--all' in Cargo commands with '--workspace'. The
former has apparently been deprecated.
We also fix a couple warnings that this new step detected.
Closes#1848
If ripgrep was called in a way where the entire contents of a file
aren't read (like --files-with-matches, among other methods), and if the
file was read through an external process, then ripgrep would never reap
that process.
We fix this by introducing an explicit 'close' method, which we now call
when using decompression or preprocessor searches.
The implementation of 'close' is a little hokey. In particular, when we
close stdout, this usually results in a broken pipe, and, consequently,
a non-zero code returned once the child process is reaped. This is
"situation normal," so we invent a (hopefully portable) heuristic for
detecting it.
Fixes#1766, Closes#1767
This fixes a bug only present on Windows that would permit someone to
execute an arbitrary program if they crafted an appropriate directory
tree. Namely, if someone put an executable named 'xz.exe' in the root of
a directory tree and one ran 'rg -z foo' from the root of that tree,
then the 'xz.exe' executable in that tree would execute if there are any
'xz' files anywhere in the tree.
The root cause of this problem is that 'CreateProcess' on Windows will
implicitly look in the current working directory for an executable when
it is given a relative path to a program. Rust's standard library allows
this behavior to occur, so we work around it here. We work around it by
explicitly resolving programs like 'xz' via 'PATH'. That way, we only
ever pass an absolute path to 'CreateProcess', which avoids the implicit
behavior of checking the current working directory.
This fix doesn't apply to non-Windows systems as it is believed to only
impact Windows. In theory, the bug could apply on Unix if '.' is in
one's PATH, but at that point, you reap what you sow.
While the extent to which this is a security problem isn't clear, I
think users generally expect to be able to download or clone
repositories from the Internet and run ripgrep on them without fear of
anything too awful happening. Being able to execute an arbitrary program
probably violates that expectation. Therefore, CVE-2021-3013[1] was
created for this issue.
We apply the same logic to the --pre command, since the --pre command is
likely in a user's config file and it would be surprising for something
that the user is searching to modify which preprocessor command is used.
The --pre and -z/--search-zip flags are the only two ways that ripgrep
will invoke external programs, so this should cover any possible
exploitable cases of this bug.
[1] - https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-3013
This fixes a bug where using \A or (?-m)^ in combination with
-U/--multiline would permit matches that aren't anchored to the
beginning of the file. The underlying cause was an optimization that
occurred when mmaps couldn't be used. Namely, ripgrep tries to still
read the input incrementally if it knows the pattern can't match through
a new line. But the detection logic was flawed, since it didn't account
for line anchors. This commit fixes that.
Fixes#1878, Fixes#1879
It turned out that --vimgrep wasn't quite getting the column of each
match correctly. Instead of printing column numbers relative to the
current line, it was printing column numbers as byte offsets relative to
where the match began. To fix this, we simply subtract the offset of the
line number from the beginning of the match. If the beginning of the
match came before the start of the current line, then there's really
nothing sensible we can do other than to use a column number of 1, which
we now document.
Interestingly, existing tests were checking that the previous behavior
was intended. My only defense is that I somehow tricked myself into
thinking it was a byte offset instead of a column number.
Kudos to @bfrg for calling this out in #1866:
https://github.com/BurntSushi/ripgrep/issues/1866#issuecomment-841635553
It looks like no new dependencies have been introduced. Yay!
This update was primarily motivated to bring regex 1.5 in with its new
memmem implementation from the memchr crate.
This message will emit the binary detection mechanism being used for
each file.
This does not noticeably increases the number of log messages, as the
'trace' level is already used for emitting messages for every file
searched.
This trace message was added in the course of investigating #1838.
Sadly, there were several tests that are coupled to the size of the
buffer used by ripgrep. Making the tests agnostic to the size is
difficult. And it's annoying to fix the tests. But we rarely change the
buffer size, so ¯\_(ツ)_/¯.
This increases the initial buffer size from 8KB to 64KB. This actually
leads to a reasonably noticeable improvement in at least one work-load,
and is unlikely to regress in any other case. Also, since Rust programs
(at least on Linux) seem to always use a minimum of 6-8MB of memory,
adding an extra 56KB is negligible.
Before:
$ hyperfine -i "rg 'zqzqzqzq' OpenSubtitles2018.raw.en --no-mmap"
Benchmark #1: rg 'zqzqzqzq' OpenSubtitles2018.raw.en --no-mmap
Time (mean ± σ): 2.109 s ± 0.012 s [User: 565.5 ms, System: 1541.6 ms]
Range (min … max): 2.094 s … 2.128 s 10 runs
After:
$ hyperfine -i "rg 'zqzqzqzq' OpenSubtitles2018.raw.en --no-mmap"
Benchmark #1: rg 'zqzqzqzq' OpenSubtitles2018.raw.en --no-mmap
Time (mean ± σ): 1.802 s ± 0.006 s [User: 462.3 ms, System: 1337.9 ms]
Range (min … max): 1.795 s … 1.814 s 10 runs
If ripgrep hasn't been built yet (i.e. target/debug/ doesn't exist),
then cargo-out-dir can't find OUT_DIR and the copy commands fail. Fix by
running cargo build before finding OUT_DIR.
Also add a check to fail early with a sensible error message when
asciidoctor isn't installed, rather than failing because of a missing
rg.1 file after the build.
PR #1831
memmap is unmaintained at this point and it is being flagged as a
RUSTSEC advisory in ripgrep. This doesn't seem like that big of a deal
to me honestly, but memmap2 looks like a fine choice at this point.
Fixes#1785, Closes#1786
It seems that PowerShell uses sockets instead of FIFOs to redirect the
output between commands. So add `is_socket` to our `is_readable_stdin`
check.
This seems unlikely to cause problems and it probably more generally
correct than what we had before. In theory, it could cause problems if
it produces false positives, in which case, ripgrep will try to read
stdin when it should search the current working directory. (And this
usually winds up manifesting as ripgrep blocking forever.) But, if the
stdin handle reports itself as a socket, then it seems like we should
read it.
Fixes#1741, Closes#1742
`ignore::Error` wraps `std::io::Error` with additional information
(as well as expose non-IO errors). For people wanting to inspect what
the error is, they have to recursively match the Enum. This provides
`io_error` and `into_io_error` helpers to do this for the user.
PR #1740
