In fmp4 & sub-range mode, the output's duration always smaller than expected,
because the size of the last #EXT-X-BYTERANGE is too small.
Signed-off-by: Charles Liu <liuchh83@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
The size of init.mp4 is zero in fmp4 mode,
when the input duraton smaller than the expected segment time.
fix ticket: 7166
Signed-off-by: Charles Liu <liuchh83@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
In fmp4 mode, the duration of the second m4s segment is
unusually smaller than the expected segment time.
Signed-off-by: Charles Liu <liuchh83@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Because it will be used by avformat/segment.c or other module which
need to automatically create sub-directories operation.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
fix the build warning for "ISO C90 forbids mixed declarations and code"
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
This fixes the creation of the hls manifest in hlsenc.c by writing the
entire manifest at the end for VOD playlists. Live & Event Playlists are unaffected.
This also fixes the behavior with HLS_TEMP_FILE to work correctly when
-hlsflags temp_file is specified, instead of always relying on use_rename, which caused these problems.
Files that would previously take over a week to fragment now take
1 minute on the same hardware. This was a 153 hour audio file (2.2GB of audio).
Signed-off-by: Ronak Patel <ronak2121@yahoo.com>
fix ticket: 7305
vs->sequence - hls->start_sequence - vs->nb_entries is the
after_init_list_dur fragment numbers
fix the wrong compute way vs->sequence - vs->nb_entries
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
and refine the warning message when use both hls_key_info_file and hls_enc
Reviewed-by: Gyan Doshi <ffmpeg@gyani.pro>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
When using hls_list_size with hls_flags delete_segments, currently
hls_list_size * 2 +- segments remain on disk. With this new option,
the amount of disk space used can be controlled by the user.
fix ticket: #7131
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Aman Gupta <aman@tmm1.net>
When var_stream_map option is used, %v must appear either in segment
name template or in the directory path. This latter case currently is
not handled and delete_segments flag of hls_flags is broken now. This
patch fix this. The root cause of the bug was that HLSSegment struct
only stores the final filename part, but not the final directory path.
Most of the cases, final path info is unneded, It only necessary when
you want to delete old segments (e.g in case of live streaming).
Without variant streams it was unnecessary to store the final directory
path, because all segment were stored into the same directory. But
introducing %v in directory names either require to store the final
directory path into HLSSegment or associate segments with their variant
streams to be able deleting them later. I have choosen the second
solution and introduced a variant index data member into the segment
struct.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@onvideo.cn>
av_strtok calls strspn on a non-NULL *saveptr, so not NULL initializing
it is an issue.
Fixes CID #1428568
Reviewed-by: Karthick Jeyapal <kjeyapal@akamai.com>
Signed-off-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Enables having proper bit rate values being written into the master
playlist in case of hard-constrained VBR where the maximum bit
rate utilized is known before hand.
Does the same thing as movenc.c, for example.
Signed-off-by: Jan Ekström <jan.ekstrom@aminocom.com>
fix ticket: #7044
Get the first video stream to reference for split segment
when there have more than one video stream
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Reviewed-by: Karthick Jeyapal <kjeyapal@akamai.com>
Currently using HLS_TEMP together with HLS_SECOND_LEVEL_SEGMENT_DURATION
or HLS_SECOND_LEVEL_SEGMENT_SIZE gives error at end of each segment
writing and the final segment file names do not contain the desired
data. This patch fixes this bug by delaying the initilization of
original segment filename after actual temp file renaming will skip the
interfering.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
If codecpar->extradata is not set (for example, when the stream goes
through the 'tee' muxer), then a segfault occurs.
This patch ensures the data variable is not null before attempting
to access it
Before the var_stream_map option was available - I was using the tee
muxer to create each resolution as an individual stream.
When running this configuration after the most recent hlsenc change
I hit a segfault
The most simple command which recreates the segfault is:
ffmpeg -i in.ts -map 0:a -map 0:v -c:a aac -c:v h264 -f tee [select=\'a,v\':f=hls]tv_hls_hd.m3u8
Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org>
Currently http end of chunk is signalled implicitly in hlsenc_io_open().
This mean playlists http writes would have to wait upto a segment duration to signal end of chunk causing delays.
This patch will fix that problem and improve performance.
Before this patch persistent http connections would work only for media segments.
The playlists were still opening a new connection everytime.
This patch extends persistent http connections to playlists as well.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Since close is not called, during http persistent connection,
flush needs to be called so that output is written on time.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
This patch fixes Bug #6868
Sometimes end_pts is getting initialized to audio stream's
first pts, while the duration is calculated based on video stream's pts.
In this patch the end_pts is initialized with the correct stream's first pts.
Reviewed-by: Steven Liu <lq@onvideo.cn>
Tested-by: beloko
Makes behaviour of 805ce25b1d optional, re-enables
HLS key rotation feature
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: DHE <git@dehacked.net>
ticket-id: #6541
when use hls fmp4 muxer, the extention name is not .m4s, this
code can fix it.
Found-by: JohnPi
Signed-off-by: Steven Liu <lq@onvideo.cn>
have not implementation the fmp4 single file yet before this commit.
Suggested-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Steven Liu <lq@onvideo.cn>
when use fmp4 segment type in hls and use codec copy,
there have an error message.
error message:
[mp4 @ 0x25df020] Tag avc1 incompatible with output codec id '28' ([33][0][0][0])
[hls @ 0x2615c80] Some of the provided format options in '(null)' are not recognized
Could not write header for output file #0 (incorrect codec parameters ?): Invalid argument
this patch can fix it.
Signed-off-by: Liu Qi <w_liuqi@kingsoft.com>
Signed-off-by: Steven Liu <lq@onvideo.cn>
When the hlsenc at BYTERANGE mode, it should not show the warning message:
"Duplicated segment filename detected:"
Reported-by: Marco <marco@worldcast.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
the SECOND_LEVEL* flags process and name is too long
extract all of them output to funtions, make code clear
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
MSVC doesn't support the %s time format, and instead of returning an
error the invalid parameter handler is invoked which (by default)
terminates the process.
Reviewed-by：Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Hendrik Leppkes <h.leppkes@gmail.com>
refer to ticket id: #6170
rename file from temp to origin name after complete current segment
Reviewed-by: Aman Gupta <ffmpeg@tmm1.net>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
When the http method is not set, the method will use POST for ts,
PUT for m3u8, it is not unify, now set it unify.
This ticket id: #5315
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
hls-encoder currenlty does not provide stream level metadata to mpegts
muxer. This patch fixes track #3848 bug.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
When user use the hls_wrap, there have many problem:
1. some platform refersh the old but usefull segment
2. CDN(Content Delivery Network) Deliver HLS not friendly
The hls_wrap is used to wrap segments for use little space,
now user can use hls_list_size and hls_flags delete_segments
instead it.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Adds a `-hls_flags +temp_file` which will write segment data to
filename.tmp, and then rename to filename when the segment is complete.
This patch is similar in spirit to one used in Plex's ffmpeg fork, and
allows a transcoding webserver to ensure incomplete segment files are
never served up accidentally.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Reviewed-by: Bodecs Bela <bodecsb@vivanet.hu>
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
When use http method to delete the old segments,
there is only io_open, hove not io_close yet,
this patch is used to fix it
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
when push hls to http server, the old segemnts can not delete by hls formats.
so add the http option into hls_delete_old_segments
Reported-by: Yin Jiaoyuan <yinjiaoyuan@163.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
when hlsenc use flag second_level_segment_index,
second_level_segment_size and second_level_segment_duration,
the rename is ok but the output filename always use the old filename
so move the rename operation after the close the ts file and
before open new segment
Reported-by: Christian Johannesen <chrisjohannesen@gmail.com>
Reviewed-by: Bodecs Bela <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
start_number option starts the playlist sequence number
(#EXT-X-MEDIA-SEQUENCE) from the specified number. Unless hls_flags
single_file is set, it also specifies starting sequence numbers of
segment and subtitle filenames. Sometimes it is usefull to have unique
starting numbers at each run, but currently it is only achiveable by
setting this parameter manually.
This patch enables to specify start_number source parameter by
introducing hls_start_number_source with 3 possible values:
generic/epoch/datetime. This ensures to set start sequence number
automatically for practically unique numbers. Generic option is the
default and this is the curent behaviour: start_number option value
specifies the start sequence number. (start_number default value is 0)
If hls_start_number_source is set to epoch, then the start number will
be the seconds since epoch (1970-01-01 00:00:00). If set to datetime,
then the start sequence number will be based on the current date/time
value as YYYYmmddHHMMSS. e.g. 20161231235659.
Hls speficication allows 64 bit integers as sequence numbers. This patch
also changes some code where only 32 bit integer values were handled
correctly.
Reviewed-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
when the segments largest duration value is look like 4.000000, the
EXT-X-TARGETDURATION value should equ 4.
it's wrong when hlsenc use ceil, so fix it.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
CID: 1398228
Passing null pointer dirname to strlen, which dereferences it.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
in get_default_pattern_localtime_fmt the default pattern contains
%Y%m%d%H%I%S but the original intention was %Y%m%d%H%M%S
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
fix CID: 1398364 Resource leak
refine the code of the new options
Reviewed-by: Bodecs Bela <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
A wrong, unitialized variable is used for testing. This patch fixes this
typo.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
1st:
This patch makes it possible to put actual segment file size (measured
in bytes) and/or duration (calculated in microseconds) into segment
filenames. This feature is useful when post-processing live streaming
access log files. New behaviour works only when -use_localtime option
is set and second_level_segment_size or/and
second_level_segment_duration new hls_flags are specified. %%s is the
placeholder for size and %%t for duration in hls_segment_filename
option. Fix sized trailing zeropadding also works eg. %%09s or %%023t.
A command to test new features:
./ffmpeg -loglevel info -y -f lavfi -i color=c=red:size=640x480:r=25 -f
lavfi -i sine=f=440:b=4:r=44100 -c:v mpeg2video -g 25 -acodec aac
-cutoff 20000 -ac 2 -ar 44100 -ab 192k -f hls -hls_time 3 -hls_list_size
5 -hls_flags
second_level_segment_index+second_level_segment_size+second_level_segment_duration
-use_localtime 1 -use_localtime_mkdir 1 -hls_segment_filename
"segment_%Y%m%d%H%M%S_%%04d_%%08s_%%013t.ts" stream.m3u8
2nd:
doc/muxers: beside second_level_segment_duration and second_level_segment_size,
added some more details and example to hls_segment_filename,
use_localtime, use_localtime_mkdir, hls_flags. hls_flags option list
reformatted to table
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Current implementation of finding duplicate segment filenames may fail
if use_localtime_mkdir and use_localtime are in effect and
segment_filename option expression contains subdirectories with
date/time specifiers. This patch fixes this false behaviour.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
in hlcenc.c, in the hls_write_header() function the default format
string for strftime() function contains %s specifier when use_localtime
is true. This %s specifier will insert the seconds since EPOCH. But %s
is not available on all system/environment. This patch check %s
availabilty at runtine and alter the default format string if necessary.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
When delete_segments hls_flag is specified, deleting old segments may
fail in certain cases when use_localtime_mkdir is in effect and
hls_segment_filename expression contains subdirs. This patch fixes this
behaviour.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
in filenames
Putting date/time values into segment filenames is very usefull.
But to produce non-conflicting segment filenames with -use_localtime
option with date/time
values in hls_segment_filename option, sometimes is not enough.
Like in cases when multiple segments produced in the same second.
But hlsenc currently does not make possible to use segment index (%d) at
the
same time whe use_localtime is in effect, due to identifier conflict.
This patch makes possible to use strftime identifiers and still put
segment index (%d) at same time in segment filenames by introducing
second_level_segment_index flag. When -use_localtime is active,
identifier %d is for month day index, so %%d is the segment index
placeholder. This enhanced behaviour only exists when new
second_level_segment_index flag is specified.
For instance putting 'segment_%Y%m%d%H%M%S_%%05d.ts' value into
-hls_segment_filename option and specifing -hls_flags
second_level_segment_index and -use_localtime 1, may produce segment
filename as 'segment_20161230235758_00002.ts'
An example:
ffmpeg -loglevel info -y -f lavfi -i color=c=red:size=640x480:r=25 -f
lavfi -i anullsrc=r=44100:cl=stereo -c:v mpeg2video -g 25 -acodec aac
-cutoff 20000 -ac 2 -ar 44100 -ab 192k -f hls -hls_time 3 -hls_list_size
5 -hls_flags delete_segments+second_level_segment_index -use_localtime 1
-hls_segment_filename "segment_%Y%m%d%H%M%S_%%05d.ts" stream.m3u8
will produce segments filenames:
....
segment_20161227005902_00013.ts
segment_20161227005902_00014.ts
segment_20161227005902_00015.ts
segment_20161227005903_00016.ts
segment_20161227005903_00017.ts
segment_20161227005903_00018.ts
segment_20161227005903_00019.ts
segment_20161227005903_00020.ts
....
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
initial_prog_date_time shouldn't be adjusted when deleting segments
from disk, but rather when segments are removed from the playlist.
Signed-off-by: Jesper Ek <deadbeef84@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
ffmpeg-devel
with use_localtime parameter hlsenc may produce identical filenames for
different but still existing segments. It happens when
hls_segment_filename contains
syntacticaly correct but inadequate format parameters. Currently there
is no any log message when such a situaton occurs but these cases should
be avoided in most times. This patch generate warning log messages in
these cases.
ticketID: #6043
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
Fixes https://trac.ffmpeg.org/ticket/5940#ticket
Reviewed-by: Michael Niedermayer <<michael@niedermayer.cc>>
Signed-off-by: Robert Nagy <ronag89@gmail.com>
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
when use use_localtime_mkdir to create multi level dir,
ffmpeg give error message:
ffmpeg -re -i ~/Movies/objectC/facebook.mp4 -c copy -use_localtime 1
-use_localtime_mkdir 1 -hls_segment_filename '%Y%m%d/file-%Y%m%d/%s.ts'
out.m3u8
error message:
Could not create directory 20160926/file-20160926 with use_localtime_mkdir
add mkdir_p for support the multi level dir
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Tested-by: Zuo Genyu <1515161258@qq.com> (Windows)
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
This patch is a fix for the bug with ticket number 5812
(https://trac.ffmpeg.org/ticket/5812).
Basically, the bug is that the last segment and the "#EXT-X-ENDLIST"
tag are not being written to the subtitle playlist file when
converting a file with subtitles to the HLS format. The reason for
this seem to be that the filename for the subtitle file is being freed
too early. This solution is simply to free that memory after it's last
use in the "hls_window" function.
Signed-off-by: Franklin Phillips <franklinphillips9p8@inbox.lv>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When use append_list mode, the hls_init_time set nouse,
Because the append_list only support append at the old m3u8 end
cannot set init segments durations at the middle of the list.
That's invalid. and show a warning message for user.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
recover segments duration time by hls_time after init hls window.
This is reuqested by Ibrahim Tachijian
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When ffmpeg exit by exception, start a new ffmpeg will
cover the old segment list, add this flag can continue
append the new segments into old hls segment list
Signed-off-by: LiuQi <liuqi@gosun.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
support split hls segment at duration set by hls_time
Signed-off-by: LiuQi <liuqi@gosun.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
Use with -use_localtime, and set -hls_segment_filename to a path which
contains a subdirectory i.e. /some/path/%Y%m%d/%Y%m%dT%H%M%S-%s.ts
This will mkdir the %Y%m%d-part of the path if it does not already
exist.
In addition, each filename in the playlist output will be prefixed with
this subdirectory (if playlist and segment shares the same base path).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This also deprecates our old duplicated callbacks.
* commit '9f61abc8111c7c43f49ca012e957a108b9cc7610':
lavf: allow custom IO for all files
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Some (de)muxers open additional files beyond the main IO context.
Currently, they call avio_open() directly, which prevents the caller
from using custom IO for such streams.
This commit adds callbacks to AVFormatContext that default to
avio_open2()/avio_close(), but can be overridden by the caller. All
muxers and demuxers using AVIO are switched to using those callbacks
instead of calling avio_open()/avio_close() directly.
(de)muxers that use the URLProtocol layer directly instead of AVIO
remain unconverted for now. This should be fixed in later commits.
Added HLS encryption with -hls_key_info_file <key_info_file> option. The
first line of key_info_file specifies the key URI written to the
playlist. The key URL is used to access the encryption key during
playback. The second line specifies the path to the key file used to
obtain the key during the encryption process. The key file is read as a
single packed array of 16 octets in binary format. The optional third
line specifies the initialization vector (IV) as a hexadecimal string to
be used instead of the segment sequence number (default) for encryption.
Changes to key_info_file will result in segment encryption with the new
key/IV and an entry in the playlist for the new key URI/IV.
Key info file format:
<key URI>
<key file path>
<IV> (optional)
Example key URIs:
http://server/file.key
/path/to/file.key
file.key
Example key file paths:
file.key
/path/to/file.key
Example IV:
0123456789ABCDEF0123456789ABCDEF
Example:
ffmpeg -f lavfi -i testsrc -c:v h264 -hls_key_info_file file.keyinfo
foo.m3u8
file.keyinfo:
http://server/file.key
/path/to/file.key
0123456789ABCDEF0123456789ABCDEF
Example shell script:
BASE_URL=${1:-'.'}
openssl rand 16 > file.key
echo $BASE_URL/file.key > file.keyinfo
echo file.key >> file.keyinfo
echo $(openssl rand -hex 16) >> file.keyinfo
ffmpeg -f lavfi -re -i testsrc -c:v h264 -hls_flags delete_segments \
-hls_key_info_file file.keyinfo out.m3u8
--
Signed-off-by: Christian Suloway <csuloway@globaleagleent.com>
Signed-off-by: Dan Dennedy <dan@dennedy.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Close segment I/O context and append segment in hls_write_trailer() only
when segment I/O context is allocated.
Signed-off-by: Christian Suloway <csuloway@globaleagleent.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This option flag deletes segment files removed from the playlist after a
period of time equal to the duration of the segment plus the duration of
the playlist.
Signed-off-by: Christian Suloway <csuloway@globaleagleent.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This option allows segment filenames to be specified. Unless -hls_flags
single_file is set the filename is used as a string format with the
segment number.
Example:
ffmpeg -f lavfi -i testsrc -c:v h264 -map 0 -hls_segment_filename
bar%03d.ts foo.m3u8
Signed-off-by: Christian Suloway <csuloway@globaleagleent.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes the abnormally high ts overhead in the files produced by the
HLS and segments muxers. See https://trac.ffmpeg.org/ticket/2857 . For
example makes it much more likely that it can produces streams that fit
under the 64kb App store limit.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '28816050e47b6dba430a52e429d21a864cffda8e':
lavf: Set the stream time base hint properly for chained muxers
Conflicts:
libavformat/segment.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The -hls_allow_cache parameter enables explicitly setting the
EXT-X-ALLOW-CACHE tag in the manifest file. That tag indicates
whether the client MAY or MUST NOT cache downloaded media
segments for later replay.
Valid values are 1 (=YES) or 0 (=NO) and the EXT-X-ALLOW-CACHE
will not show in the manifest for other values (or if
-hls_allow_cache is not used.
Signed-off-by: Martin Storsjö <martin@martin.st>
The -hls_allow_cache parameter enables explicitly setting the
EXT-X-ALLOW-CACHE tag in the manifest file. That tag indicates
whether the client MAY or MUST NOT cache downloaded media
segments for later replay.
Valid values are 1 (=YES) or 0 (=NO) and the EXT-X-ALLOW-CACHE
will not show in the manifest for other values (or if
-hls_allow_cache is not used.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This adds a new option -hls_flags single_file that creates one .ts file
for HLS and adds byteranges to the .m3u8 file, instead of creating one
.ts file for each segment.
This is helpful at least for storing large number of videos, as the
number of files per video is drastically reduced and copying and storing
those files takes less requests and inodes.
This is based on work by Nicolas Martyanoff, discussed on ffmpeg-devel
in July 2014. That patch seems abandoned by the author, and contained
unrelated changes. This patch tries to add the minimum amount of code to
support the byterange playlists.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
With HLS, the duration of all segments must be lower or equal to the target
duration. Therefore floor(duration + 0.5) yields incorrect results.
For example, for duration = 1.35, floor(duration + 0.5) yields 1.0, but the
correct result is 2.0.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
* commit '7266e24f176389d2e81bfc7c829934f7c8ae361c':
hls: Sync the file number with the start sequence
Conflicts:
libavformat/hlsenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
