This should make it possible for Fraunhofer to contribute to these
wrappers - they didn't want to contribute to code under LGPL2.1 with
the "or any later version" clause (which allowed using the code
under the LGPL3 license).
Signed-off-by: Martin Storsjö <martin@martin.st>
Also set the RGBA pixel format correctly as the native endian format,
which is what it returns.
This fixes the tests on big endian.
Signed-off-by: Martin Storsjö <martin@martin.st>
This array is written using AV_WN32A, assuming alignment.
This hopefully fixes the failing vp7 fate test on sparc.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously, if read_connect failed, the ret variable was unmodified
and had the value 0, indicating success, which then was returned from
the rtmp_open function, even though it actually failed.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This was only used in hevc muxing code so far.
This makes the return values match what get_se_golomb returns for
the same bitstream reader instances.
The logic for producing a signed golomb code out of an unsigned one
was based on the corresponding code in get_se_golomb, which operated
directly on the bitstream reader buffer - not on the equivalent
return value from get_ue_golomb.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
For live audio streams, requiring 500 frames for a stream to
be detected is a bit overkill.
This allows live ADTS streams that don't start nicely at
a frame boundary to start up more quickly, e.g.
http://mp3.streampower.be/radio1.aac.
Signed-off-by: Martin Storsjö <martin@martin.st>
If a portion of the probe buffer seem to resemble ADTS frames,
but some data at the end is a mismatch, disregard the whole
probing attempt. If it actually is ADTS data, there shouldn't be
any mismatches within the sequential frame data.
Signed-off-by: Martin Storsjö <martin@martin.st>
The MSVCRT version of strftime calls the invalid parameter handler
if the struct values in struct tm are invalid. In case no invalid
parameter handler is set for the process, the process is aborted.
This fixes fate failures on MSVC builds since 570af382.
Based on a patch by Hendrik Leppkes.
Signed-off-by: Martin Storsjö <martin@martin.st>
Based on a suggestion by Martin Panter. This is more descriptive,
since it's the actual timestamp field from the RTMP packet,
which might or might not be a delta depending on context (in
some packets it's a delta, in some packets it's an absolute
timestamp, and in some packets it's 0xffffff to indicate that
the actual delta or absolute timestamp is transmitted separately).
Signed-off-by: Martin Storsjö <martin@martin.st>
Without this cast, the BE_32() expression is sign extended when
assigned to an uint64_t, since the uint8_t|uint8_t expression
is promoted to an int.
Also avoid undefined behaviour when left shifting an uint8_t
by 24 by casting it to an uint32_t explicitly before shifting.
Based on a patch by Michael Niedermayer.
Signed-off-by: Martin Storsjö <martin@martin.st>
Copying data in chunks of 1 KB is a little wasteful.
64 KB should still easily fit on the stack, so there's no need
to allocate it dynamically.
Signed-off-by: Martin Storsjö <martin@martin.st>
If linking in an object file without this attribute set, the
linker will assume that an executable stack might be needed.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes the generated assembly more internally consistent,
avoiding declaring two labels for the same function (for cases
where EXTERN_ASM is empty) and not declaring a separate unprefixed
label in other cases.
This also makes sure the .func and .type delcarations have the same
prefix. They have previously not been used on the platforms
that have prefixed symbols on arm (iOS), but gas-preprocessor
has recently started using the .func declarations for adding
.thumb_func declarations for such functions.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes playback of mp3 streams in rtp/asf. This used to work
until c6f1dc8, but mostly by coincidence.
Signed-off-by: Martin Storsjö <martin@martin.st>
The normal differential timestamps can't handle negative
differences, thus send a full packet header with an absolute
timestamp in these cases.
Signed-off-by: Martin Storsjö <martin@martin.st>
If the url ends with .flv, we stripped it but didn't initialize
rt->playpath, doing av_strlcat on an uninitialized buffer.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids the caller having to calculate the byte rate if wanting
to push a file in a rate resembling realtime.
Signed-off-by: Martin Storsjö <martin@martin.st>
It could probably also be considered an error if the pointer isn't
null at this point, but then we might risk rejecting some
slightly broken files that we might have handled so far.
Sample-Id: 00000496-google
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
These arrays are normally freed at the end of mov_read_trak,
but make sure they're freed in case mov_read_trak returned
early (due to errors) or in case the atoms that allocate arrays
are encountered at some other point than within a trak (which
we don't have checks against).
Sample-Id: 00000496-google
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The function macro always sets .align 2 before declaring the
function label (since 5c5e1ea3) and always sets the section to
.text (since 278caa6a).
The .align 5 before certain functions, added in fc252eba, were added
before .text and .align were added to the function macro and thus
became useless/unused when the function macro got them.
This restores the original intention, to align the loop entry
points.
Signed-off-by: Martin Storsjö <martin@martin.st>
This file no longer uses the pld instruction at all, all such uses
have been split into hpeldsp_arm.S.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously, if neither of the checks for the closesocket function
succeeded, we still kept winsock2.h and networking in general
enabled.
When targeting the WinRT API subset, the winsock2.h header is
available (making the check for it succeed, giving the impression
that winsock is available), but tests that actually try to use
such a function will fail. In this case, disable the winsock2.h
feature and networking in general, as if the winsock2.h header
test would have failed in the first place.
Signed-off-by: Martin Storsjö <martin@martin.st>
The RGB32 pixel format is RGBA/BGRA depending on target
endianness - make sure to convert it to one specific format for
the framecrc tests.
This fixes the pngparser fate test on big endian.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since pc.state is populated by shifting in from the end of the
32 bit word, the content within pc.state is already in native endian
and should not be read with the AV_R{L,B} functions.
This was already done correctly for state64 above.
This fixes the fate-corepng test on big endian.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a memory leak (or having to worry about freeing the
config string) if the colorspace isn't accepted.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes decoding, broken since 7e35037.
This is similar to what was done for the normal mp3 decoder in
f4a86bc9.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes leftover issues from 14abeaa4 which caused make
rules for programs to not match up properly when the executable
suffix was nonempty.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows both the main playlist itself as well as the variant
playlists to handle redirects combined with relative URLs.
Signed-off-by: Martin Storsjö <martin@martin.st>
Msys is unable to convert unix style absolute paths to windows style
paths when combined with certain multichar MSVC options such as
-Fo<file>. We used to work around this issue by passing them as two
separate parameters separated by a space to c99wrap, which then mapped
them back to the actual parameter format that MSVC uses.
The only paths that actually are an issue are absolute unix style
paths, and the only place such absolute paths are used with the output
arguments (-Fo, -Fe, -Fi, -out:) are for the temp files within configure.
By setting TMPDIR to . for msvc/icl builds, we never need to use
absolute unix style paths for the file output, and we can use the
actual proper form of the file output parameters. This avoids requiring
the c99wrap wrapper for remapping the parameters for cases where the
c99 converter isn't invoked at all (MSVC2013 and ICL).
Signed-off-by: Martin Storsjö <martin@martin.st>
On some platforms (such as msys), symlinks are (poorly) emulated
by simply creating a copy of the file.
This means that when building out of tree, the build tree gets
a copy of the original makefile, which can lead to unintuitive
build errors when the original makefile gets updated later.
Instead simply create a stub makefile which includes the real
one.
Signed-off-by: Martin Storsjö <martin@martin.st>
MSVC does support enough of C99 to work without the converter since
the 2013 version. Try to detect which version of the compiler in
the path needs to run the C99 converter or not. When the converter
is omitted, compilation time is reduced quite drastically.
Prior to this, users could still use --cc="c99conv -noconv cl"
when running MSVC 2013 to achieve the same.
This checks the version number instead of doing a normal compile
test, since this check needs to be done earlier in configure, before
the normal compile test helpers are usable.
Signed-off-by: Martin Storsjö <martin@martin.st>
This simplifies proper error handling in rtsp.c/rtspdec.c. When
broadcasting over RTSP in TCP mode, the AVIOContext is closed and
recreated for each sent packet, and if the recreation fails, we might
try to close a NULL buffer when freeing things at the end.
Previously, if recreating the buffer in rtspdec.c failed, this would
crash later due to trying to close a NULL buffer.
Signed-off-by: Martin Storsjö <martin@martin.st>
This was added in 9b07a2dc02 as an ABI hack to allow older
code built with lavf 52 to register protocols even if the size
of the URLProtocol struct was increased. Later, registering
protocols from outside of lavf was removed and this workaround
isn't needed any longer since lavf 53.
This removes an unchecked malloc and a memory leak for the cases
when this workaround actually was used - which it hasn't since
lavf 53.
Signed-off-by: Martin Storsjö <martin@martin.st>
A few fate instances on OS/2, OpenBSD, FreeBSD and IA64 linux currently
still fail a few tests with a maxdiff of 6.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure that pointers from av_strdup are reallocable,
which is used in av_dict_set if the AV_DICT_APPEND flag is set.
Nothing should rely on pointers from av_strdup being aligned.
Signed-off-by: Martin Storsjö <martin@martin.st>
Normally, all channel ids are between 0 and 10, while they in
uncommon cases can have values up to 64k.
This avoids allocating two arrays for up to 64k entries (at a total
of over 6 MB in size) each when most of them aren't used at all.
Signed-off-by: Martin Storsjö <martin@martin.st>
Inspired by a patch by Jakob van Bethlehem. But instead of doing
an empty POST first to trigger the WWW-Authenticate header (which
would succeed if no auth actually was required), add an Expect:
100-continue header, which is meant to be used exactly for
cases like this.
The header is added if doing a post, and the user has specified
authentication but we don't know the auth method yet.
Not all common HTTP servers support the Expect: 100-continue header,
though, so we only try to use it when it really is needed. The user
can request it to be added for other POST requests as well via
an option - which would allow the caller to know immediately that
the POST has failed (e.g. if no auth was provided but the server
required it, or if the target URL simply doesn't exist).
This is only done for write mode posts (e.g. posts without pre-set
post_data) - for posts with pre-set data, we can just redo the post
if it failed due to 401.
Signed-off-by: Martin Storsjö <martin@martin.st>
The default is to autodetect the auth method. This does require one
extra request (and also closing and reopening the http connection).
For some cases such as HTTP POST, the autodetection is not handled
properly (yet).
No option is added for digest, since this method requires getting
nonce parameters from the server first and can't be used straight
away like Basic.
Signed-off-by: Martin Storsjö <martin@martin.st>
The plain VP6 format is vertically flipped compared to VP6F/VP6A.
Support for the plain VP6 format was added in 09d8c0ae83 (which
also introduced support for muxing VP6F properly in general).
Signed-off-by: Martin Storsjö <martin@martin.st>
In these cases, there is no extradata but only the properly set
width/height values by the demuxer.
This makes sure VP6 in F4V files is cropped properly.
This is similar to what is done for H264 for letting the container
width/height override what's in the bitstream, since 30f515091.
Signed-off-by: Martin Storsjö <martin@martin.st>
If the input file contains other tracks (non video/audio) that
aren't included in ismindex, the global file duration as returned
by libavformat might not be equal to the maximum of the duration
of the actual included tracks.
Signed-off-by: Martin Storsjö <martin@martin.st>
The stream duration is used for calculating the duration of the
last fragment easily without manually parsing anything else than
the mfra/tfra atoms. When the global file duration was used
previously, the duration of the last fragment could end up wrong
if the streams weren't equally long.
Signed-off-by: Martin Storsjö <martin@martin.st>
This wasn't an issue prior to 58404738, when the whole RTMP packet
was copied at once and the length of the individual embedded flv
packets only were validated by the flv demuxer.
Prior to this patch, this could lead to reads and writes out of bound.
Signed-off-by: Martin Storsjö <martin@martin.st>
If the embedded flv packets were incomplete and we aborted the
copying loop early, make sure the flv buffer is trimmed to
only contain full packets.
Signed-off-by: Martin Storsjö <martin@martin.st>
update_offset is also called from handle_metadata, where the
packet header sizes is already included in the size.
Previously this lead to flv_data/flv_size including 15 uninitialized
bytes at the end after each call to handle_metadata, making the
flv demuxer lose sync with the stream.
Also remove leftover copying in handle_metadata. This is a leftover
from the refactoring in 5840473. (Previously this final mempcy was
the one that copied all the packets at once, while this is done
within the loop right now.) After making sure flv_size is set to
the right size, this write was out of bounds.
Signed-off-by: Martin Storsjö <martin@martin.st>
This was overlooked in d872fb0f7 since I assumed all the realloc
issues in the rtmp code was fixed already.
Signed-off-by: Martin Storsjö <martin@martin.st>
The current magic numbers passed are values in seconds, while the
parameter itself should be passed over the wire in milliseconds.
This makes (some/all?) live streams from Red5 work correctly, that
previously returned StreamNotFound even with "-rtmp_live live". After
this commit, the default 'any' also works on these streams.
Signed-off-by: Martin Storsjö <martin@martin.st>
On (certain streams/setups at least on) Red5, the description string
actually is present, but empty. Therefore, first try loading the
description, but if not found or empty, load the code string instead.
The code string is quite understandable in most cases anyway (like
"NetStream.Play.StreamNotFound").
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure errors in setting stream parameters are passed
on to the caller. This avoids successfully opening files while
some parameters aren't filled in properly.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes reads out of bounds.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
We read 2 bytes for 15 out of 16 pixels, therefore we need to
have at least 30 bytes, not 16.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Decoded data is always written in pairs within this decoder.
This fixes writes out of bounds.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously, we returned 0, meaning successful decoding but 0
bytes consumed, leading to an infinite loop.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
If the input buffer contains more data after the deflate stream,
the loop previously left running infinitely, with inflate returning
Z_STREAM_END.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids setting a negative number of frames, ending up with a
negative average frame rate.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
If a zero-length video packet is to be returned, just return
AVERROR(EAGAIN) and switch back to the audio stream.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a division by zero for G726.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a division by zero.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
In lpc_prediction(), we write up to array element 'lpc_order' in
an array allocated to hold 'max_samples_per_frame' elements.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö
