Until now, the decoding API was restricted to outputting 0 or 1 frames
per input packet. It also enforces a somewhat rigid dataflow in general.
This new API seeks to relax these restrictions by decoupling input and
output. Instead of doing a single call on each decode step, which may
consume the packet and may produce output, the new API requires the user
to send input first, and then ask for output.
For now, there are no codecs supporting this API. The API can work with
codecs using the old API, and most code added here is to make them
interoperate. The reverse is not possible, although for audio it might.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The intrax8 decoding process does not imply any kind of error
resilience, and the only call present is more related to how mpegvideo
works rather than anything else.
Therefore have the parent decoders carry out er when actually needed.
* Change log level from error to debug
* Print report after the first decoded frame, not at the end of decoding
* Drop macro guard and use a context variable instead
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
If chan2 is not smaller than the number of channels, it can cause
segmentation faults due to dereferencing a NULL pointer.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The original code left-shifts negative values, which is undefined
in the C99 specification (the one used during normal Libav compilation).
This change multiplies by (1 << shift), which is functionally equivalent,
but has defined behavior.
With this change, fate-idct8x8 compiled with --fsanitize=undefined works.
Bug-Id: 686
Rename luma table to delta table and change how it is used.
CC: libav-stable@libav.org
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The QSV runtime expects the sync point address passed to
MFXVideoENCODE_EncodeFrameAsync() to be valid until
MFXVideoCORE_SyncOperation().
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This API is intended to allow passing around codec parameters without
using full AVCodecContext (which also contains codec options and
encoder/decoder state).
Today, we track the short term RPS size for DXVA, but only if the
SliceHeader RPS is being used. Otherwise it's left uninitialized.
NVIDIA's VDPAU implementation requires that the size be accurately
tracked even if an SPS RPS is being used. In this case, it's really
counting the size of the RPS idx information, but you end up with
mangled output if the value is not accurate.
VDPAU also needs the size of the long term RPS.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
ucNumDeltaPocsOfRefRpsIdx needs to contain the flat value from the SPS RPS,
and not the final computed value from the slice header RPS, as this calculation
is done internally by the driver again.
Sample-Id: http://trailers.divx.com/hevc/Sintel_4k_27qp_24fps_1aud_9subs.mkvi
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
This allows untangling the eatqi decoder from the MPEG-1 decoder.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The private options chromaoffset, sc_threshold, and noise_reduction
were set to 0 rather than -1, and were always initializing values
in libx264 rather than letting the library use its default.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Some debuggers/profilers use this metadata to determine which function a
given instruction is in; without it they get can confused by local labels
(if you haven't stripped those). On the other hand, some tools are still
confused even with this metadata. e.g. this fixes `gdb`, but not `perf`.
Currently only implemented for ELF.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This option is only used by mpegvideoenc.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc.
It is a very codec-specific options, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This options is only used by huffyuv, ffvhuv, jpegls, mjpeg,
mpegvideoenc, png, utvideo.
It is a very codec-specific options, so deprecate the global variant.
Set proper limits to the maximum allowed values, and update utvideoenc
tests to use the new option name.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
These options are only used by alac and flac.
They are very codec-specific options, so deprecate the global variants.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc and openh264.
It is a very codec-specific option, so deprecate the global variant.
The openh264 option is dropped altogether since it is just a fallback
for -max_nal_size anyway.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpeg2.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by ffv1 and ffvhuff.
It is a very codec-specific option, so deprecate the global variant.
Improve documentation a little.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc, and xvid.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc, x264, xavs, and vpx.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc, x264, and xavs.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by x264 and xavs.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
These options are only used by mpegvideoenc and vpx.
They are very codec-specific options, so deprecate the global variants.
Add an allowed value to the private options for frame_skip_cmp which
seems to have been forgotten, but perfectly working.
The libvpx frame dropping feature uses one of such option
(frame_skip_threshold) without the other three. For this reason rename
the option to something more consistent with the other libvpx variables.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc,
It is a very codec-specific option, so deprecate the global variant.
Set proper limits to the maximum allowed values.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The b_frame_strategy option is only used by mpegvideoenc, qsv, x264, and
xavs, while b_sensitivity is only used by mpegvideoenc.
These are very codec-specific options, so deprecate the global variants.
Set proper limits to the maximum allowed values.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
In the unlikely situation the user decides to set ticks_per_frame
and timebase to a value large enough to overflow.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The function is used on unaligned buffers (such as those provided
by AVPacket), accessing them as uint16_t causes SIGBUS crashes on
architectures like SPARC.
This fixes ubsan runtime error: load of misaligned address for type
'const uint16_t', which requires 2 byte alignment
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This is used to check if the input buffer is larger enough, so if this
overflows it can cause a false negative leading to a segmentation fault
in bytestream2_get_bufferu.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
More don't fit into the integer output.
Also use get_bits_long, since get_bits only supports reading up to 25
bits, while get_bits_long supports the full integer range.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
When there is a non-zero decoding delay due to reordering, the first dts
should be lower than the first pts (since the first packet fed to the
decoder does not produce any output).
Use the same scheme used in mpegvideo_enc (which comes from x264
originally) -- wait for first two timestamps and extrapolate linearly to
the past to produce the first dts value.
When B-frames are enabled and the encoder returns success, all currently
pending buffers immediately become valid and can be returned to the
caller. We can only return one packet at a time, so all the other
pending buffers should be transferred to a new 'ready' fifo, from where
they can be returned in subsequent calls (in which the encoder does not
produce any new output). This bug was hidden by the incorrect testing of
the encoder return value (the return value was overwritten before it was
tested).
The previous check only caught sizes from -AV_INPUT_BUFFER_PADDING_SIZE
to -1.
This fixes ubsan runtime error: signed integer overflow: 2147483647 + 32
cannot be represented in type 'int'
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Before 741b494fa8, when the reference list
modification description was invalid, the code would substitute the
corresponding reference from the initial ("default") reference list.
After that commit, it will just return an error.
Since there are apparently invalid samples in the wild that used to play
fine with the old code, it is a good idea to re-add some sort of error
resilience here. So, when the reference list modification results in a
missing frame, substitute a previous reference frame for it. The
relevant sample again decodes fine with the same output as previously.
Intel's Instruction Set Reference (as of September 2015) clearly states
that cvtpi2ps switches to MMX state. Actual CPUs do not switch if the
source is a memory location. The Instruction Set Reference from 1999
(Order Number 243191) describes this behaviour but all later versions
I've seen have make no distinction whether MMX registers or memory is
used as source.
The documentation for the matching SSE2 instruction to convert to double
(cvtpi2pd) was fixed (see the valgrind bug
https://bugs.kde.org/show_bug.cgi?id=210264).
It will take time to get a clarification and fixes in place. In the
meantime it makes sense to change ff_int32_to_float_fmul_scalar_sse to
be correct according to the documentation. The vast majority of users
will have SSE2 so a change to the SSE version has little effect.
Fixes fate-checkasm on x86 valgrind targets.
Valgrind 'bug' reported as https://bugs.kde.org/show_bug.cgi?id=357059
The DCA core decoder converts integer coefficients read from the
bitstream to floats just after reading them (along with dequantization).
All the other steps of the audio reconstruction are done with floats
which makes the output for the DTS lossless extension (XLL)
actually lossy.
This patch changes the DCA core to work with integer coefficients
until QMF. At this point the integer coefficients are converted to floats.
The coefficients for the LFE channel (lfe_data) are not touched.
This is the first step for the really lossless XLL decoding.
This macro unconditionally used out[-1], which causes an out of bounds
read, if out is the very beginning of the buffer.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Due to this typo max_center can be too large, causing nlsf to be set to
too large values, which in turn can cause nlsf[i - 1] + min_delta[i] to
overflow to a negative value, which is not allowed for nlsf and can
cause an out of bounds read in silk_lsf2lpc.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Quite a bit faster than int32_to_float_fmul_array8_c calling
ff_int32_to_float_fmul_scalar_neon through FmtConvertContext.
Number of cycles per int32_to_float_fmul_array8 call while decoding
padded.dts on exynos5422:
before after change
cortex-a7: 1270 951 -25%
cortex-a15: 434 285 -34%
checkasm --bench cycle counts: cortex-a15 cortex-a7
int32_to_float_fmul_array8_c: 1730.4 4384.5
int32_to_float_fmul_array8_neon_c: 571.5 1694.3
int32_to_float_fmul_array8_neon: 374.0 1448.8
Interesting are the differences between
int32_to_float_fmul_array8_neon_c and int32_to_float_fmul_array8_neon.
The former is current behaviour of calling
ff_int32_to_float_fmul_scalar_neon repeatedly from the c function,
The raw numbers differ since checkasm uses different lengths than the
dca decoder.
~25% faster dts decoding overall. The checkasm CPU cycles numbers are
not that useful since synth_filter_float() calls FFTContext.imdct_half().
cortex-a57 cortex-a53
synth_filter_float_c: 1866.2 3490.9
synth_filter_float_neon: 915.0 1531.5
With fftc.imdct_half forced to imdct_half_neon:
cortex-a57 cortex-a53
synth_filter_float_c: 1718.4 3025.3
synth_filter_float_neon: 926.2 1530.1
The vector mode was deprecated in ARMv7-A/VFPv3 and various cpu
implementations do not support it in hardware. Vector mode code will
depending the OS either be emulated in software or result in an illegal
instruction on cpus which does not support it. This was not really
problem in practice since NEON implementations of the same functions are
preferred. It will however become a problem for checkasm which tests
every cpu flag separately.
Since this is a cpu feature newer cpu do not support anymore the
behaviour of this flag differs from the other flags. It can be only
activated by runtime cpu feature selection.
Almost all the places from which this function is called already check
the header manually and in the two that don't (the mp3 muxer) the check
should not cause any problems.
These variables are coming from mpegvideoenc where are supposedly used
as bit counters on various frame properties. However their use is
unclear as they lack documentation, are available only from a very small
subset of encoders, and they are hardly used in the wild. Also frame_bits
in aacenc is employed in a similar way.
Remove this functionality from AVCodecContex, these variable are mostly
frame properties, and too few encoders support setting them with anything
useful.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Most option values are simply unused or ignored and in practice the
majory of codecs only need to check whether to enable rle or not.
Add appropriate codec private options which better expose the allowed
features.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Fall back to maximum DPB size if the level is unknown.
This should be more spec-compliant and does not depend on the caller
setting has_b_frames before opening the decoder.
The old behaviour, when the delay is supplied by the caller setting
has_b_frames, can still be obtained by setting strict_std_compliance
below normal.
According to the spec, the reference list for a slice should be
constructed by first generating an initial (what we now call "default")
reference list and then optionally applying modifications to it.
Our code has an optimization where the initial reference list is
constructed for the first inter slice and then rebuilt for other slices
if needed. This, however, adds complexity to the code, requires an extra
2.5kB array in the codec context and there is no reason to think that it
has any positive effect on performance. Therefore, simplify the code by
generating the reference list from scratch for each slice.
Fixes out of array reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Copy pointers to AVPicture after memory has been allocated.
Fixes NULL pointers in AVPicture after a17a766190.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
SGI RLE encoding is slighlty different than the one provided by rle
module (especially at high bit depth). The pixel count function however
does not change, so it is simply made library-public.
This is never mentioned in the specifications, and decoders work
just as fine without it. Update the fate references since the compressed
file is smaller.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
