The code to initialize it takes more space (in .text) than
the table to be initialized (namely 86B vs 64B for GCC 11.2
with -O3 in an av_cold function), so hardcode the table.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Most of the VLCs used here have a max_depth of two;
some have a max_depth of one. Therefore one can just use two
and avoid the runtime check for whether one should
perform another round of LUT lookup in case the first read
did not read a complete codeword.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, initializing the dca VLC tables uses ff_init_vlc_sparse()
with length tables of type uint8_t and code tables of type uint16_t
(except for the LBR tables, which uses length and symbols of type
uint8_t; these tables are interleaved). In case of the quant index
codebooks these arrays were accessed via tables of pointers to the
individual tables.
This commit changes this: First, we switch to ff_init_vlc_from_lengths()
to replace the uint16_t code tables by uint8_t symbol tables
(this necessitates ordering the tables from left-to-right in the tree
first). These symbol tables are interleaved with the length tables.
Furthermore, these tables are combined in order to remove the table of
pointers to individual tables, thereby avoiding relocations (for x64
elf systems this amounts to 96*24B = 2304B saved in .rela.dyn) and
saving 1280B from .data.rel.ro (for 64bit systems). Meanwhile the
savings in .rodata amount to 2709 + 2 * 334 = 3377B. Due to padding
the actual savings are higher: The ELF x64 ABI requires objects >= 16B
to be padded to 16B and lots of the tables have 2^n + 1 elements
of these were from replacing uint16_t codes with uint8_t symbols;
the rest was due to the fact that combining the tables eliminated
padding (the ELF x64 ABI requires objects >= 16B to be padded to 16B
and lots of the tables have 2^n + 1 elements)). Taking this into
account gives savings of 4548B. (GCC by default uses an even higher
alignment (controlled by -malign-data); for it the savings are 5748B.)
These changes also necessitated to modify the init code for
the encoder tables.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, the encoder used the same tables that the decoder
uses to create its VLCs. These have the downside of requiring
the encoder to offset the tables at runtime as well as having
to read from separate tables for the length as well as the code
of the symbol to encode. The former are uint8_t, the latter uint16_t,
so using a joint table would require padding, but this doesn't
matter when these tables are generated at runtime, because they
live in the .bss segment.
Also move these init functions as well as the functions that
actually use them to dcaenc.c, because they are encoder-specific.
This also allows to remove an inclusion of PutBitContext from
dcahuff.h (and indirectly from all dca-decoder files).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It increases the size of one VLC from two to three bits, thereby
requiring four more VLCEntries (16 bytes .bss), but it allows to
inline the number of bits used when reading them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The ff_dca_vlc_transition_mode VLCs don't use an offset at all,
so just use ordinary VLCs for them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
GCC 12 apparently believes that negative palette sizes are
possible (they are not, as this has already been checked during
init) and therefore emits a -Wstringop-overflow= for the memcpy.
Using unsigned avoids this.
(To be honest, there might be a compiler bug involved.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This might be useful in case this decoder were changed to support
new extradata passed via side-data.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This code is only called once during init, so none of the buffers
here have been allocated already.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
183132872a made the iff demuxer
output extradata and made the decoder parse said extradata.
To make this extradata extensible, it came with its own internal
length field (containing the offset of the palette at the end
of the extradata). Furthermore, in order to support mid-stream
extradata changes, the packets returned by the demuxer also have
such a length field (containing the offset of the actual packet
data). Therefore the packet parsing the extradata accepted its
input from both AVPackets as well as from ordinary extradata.
Yet the demuxer never made use of this "feature": The packet's
length field always indicated that the packet data starts
immediately after the length field.
Later, commit cb928fc448 stopped
appending the length field to the packets' data; of course,
it also stopped searching for extradata in this data.
Instead it added code to parse the packet's header to the function
that parses extradata. This made this function consist of two disjoint
parts, one of which is only reachable if this function is called
from init (when parsing extradata) and one of which is reachable
when parsing packet headers.
Therefore this commit splits this function into two.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Otherwise the buffer might be too small. Fixes assert violations
when encoding mono audio with exactly one sample.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For example, if the jpeg contains exif information
and the rotation direction is included in the exif,
the displaymatrix will be set on the side_data of the frame when decoding.
However, when ffplay is used to play the image,
only the side data in the stream will be determined.
It does not check whether the frame also contains rotation information,
causing it to play in the wrong direction
Reviewed-by: Zhao Zhili <zhilizhao@tencent.com>
Signed-off-by: Wang Yaqiang <wangyaqiang03@kuaishou.com>
It is currently calling av_channel_layout_describe()
unnecessarily.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
If a developer using FFmpeg libraries seeks into an earlier position and calls
avcodec_flush_buffers() afterwards as recommended, the Vorbis decoder will drop
the next frame, since buffer flushing clears the first_frame flag. As a result,
the audio samples the calling code receives may be ahead of the requested seek
position, which is unacceptable in some use cases such as playing a looping
sound effect.
This commit records the presentation timestamp of the first frame and
determines after that if the new frame is the first frame (possible after
seeking to the start) by comparing its pts to the stored pts.
When appending two values (due to AV_DICT_APPEND), the earlier code
would first zero-allocate a buffer of the required size and then
copy both parts into it via av_strlcat(). This is problematic,
as it leads to quadratic performance in case of frequent enlargements.
Fix this by using av_realloc() (which is hopefully designed to handle
such cases in a better way than simply throwing the buffer we already
have away) and by copying the string via memcpy() (after all, we already
calculated the strlen of both strings).
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
If a key already exists in an AVDictionary and the AV_DICT_APPEND flag
is set, the old entry is at first discarded from the dictionary, but
a pointer to the value is kept. Lateron enough memory to store the
appended string is allocated; should this allocation fail, the old string
is not freed and hence leaks. This commit changes this by moving
creating the combined value to an earlier point in the function,
which also ensures that the AVDictionary is unchanged in case of errors.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
We know that an AVDictionary is not empty if we have just added
an entry to it, so only check for it being empty on the branch
that does not do so.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
av_strlcpy() returns the length of the src string to enable
the caller to check for truncation. It is currently used in
the following way in dump_metadata(): Every metadata value
is searched for \b, \n, \v, \f, \r and then the data up to
the first of these characters found is copied to a small
temporary buffer via av_strlcpy() (but of course not more
than fits into said buffer) and then printed; all characters up
to the character found earlier are then treated as consumed.
But this is bad performance-wise if the while string is big
and contains many of these characters, because av_strlcpy()
will unnecessarily calculate the length of the whole remaining string.
(dump_metadata() actually ignored the return value of av_strlcpy().)
Fix this by not copying the data to a temporary buffer at all.
Instead just use %.*s to bound the number of characters output.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It may be NULL, as is the case for D3D11VA_VLD.
Running "ffmpeg -h decoder=h264" on a Windows build
Before:
Decoder h264 [H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10]:
Supported hardware devices: dxva2 (null) d3d11va cuda
After:
Decoder h264 [H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10]:
Supported hardware devices: dxva2 d3d11va cuda
Signed-off-by: James Almer <jamrial@gmail.com>
If it's unsupported or invalid, then there's no point trying to rebuild it
using a value that may have been derived from the same layout to begin with.
Move the checks before the attempts at copying the layout while at it.
Fixes ticket #9908.
Signed-off-by: James Almer <jamrial@gmail.com>
This reverts commit 2c8dc7e953.
The loongarch headers have been fixed, so that this wrapper
is no longer necessary.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This reverts commit 6c9a60ada4.
The loongarch headers have been fixed, so that this workaround
is no longer necessary.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
