Add "slice" intra refresh type to h264_qsv and hevc_qsv. This type means
horizontal refresh by slices without overlapping. Also update the doc.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
This duration is equal to the longest duration in all track's tkhd atoms, which
may be comprised of the sum of all edit lists in each track. Empty edit lists
in tracks represent start_time, and the actual media duration is stored in the
mdhd atom.
This change lets the generic demux code derive the longest track duration taken
from mdhd atoms, so the correct duration and start_time combination will be
reported.
Should fix ticket #9775.
Reviewed-by: zhilizhao(赵志立) <quinkblack@foxmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
These macros are definitions, not only declarations and therefore
should not contain a semicolon. Such a semicolon is actually
spec-incompliant, but compilers happen to accept them.
Reviewed-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The latest commit of Loongson MMI macro replaces were incorrect.
It makes a mass of green tints on HEVC videos when playing. I've
compared it with the older MMI implementation, and found out that
several lines have been replaced by wrong macros.
Signed-off-by: Qi Tiezheng <qitiezheng@360.cn>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
AV_PIX_FMT_VUYX is used in FFmpeg and MFX_FOURCC_AYUV is used in the SDK
Reviewed-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
AV_PIX_FMT_VUYX is used for 8bit 4:4:4 content in FFmpeg VAAPI, so
AV_PIX_FMT_VUYX should be used for 8bit 4:4:4 content in FFmpeg QSV too
because QSV is based on VAAPI on Linux. However the SDK only declares
support for AYUV and does nothing with the alpha, so this commit fudged
a mapping between AV_PIX_FMT_VUYX and MFX_FOURCC_AYUV.
Reviewed-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Currently AVBR is disabled and VBR is the default method if maxrate is
not specified on Linux, but AVBR is the default one if maxrate is not
specified on Windows. In order to make user experience better accross
Linux and Windows, use VBR by default on Windows if maxrate is not
specified. User need to set both avbr_accuracy and avbr_convergence to
non-zero explicitly and not to specify maxrate if AVBR is expected.
In addition, AVBR works for H264 and HEVC only in the SDK.
$ ffmpeg.exe -v verbose -f lavfi -i yuvtestsrc -vf "format=nv12" -c:v
vp9_qsv -f null -
The FFV1 decoder only uses the last frame's data to conceal
errors. The encoder does not have this problem and therefore
only uses the current frame and none of the ThreadFrames.
So only allocate them for the decoder.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
By using a symbol table one can already bake in applying
a LUT on the return value of get_vlc2(). So change the
symbol table for the vec2 and vec4 tables to avoid
using the symbol_to_vec2/4 LUTs.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It allows to replace tables of big codes (uint16_t and uint32_t)
by tables of smaller symbols (mostly uint8_t).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These codes are already ordered from left-to-right in the tree,
so one can just use ff_init_vlc_static_from_lengths().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Instead reuse the destination RL VLC as scratch space.
This is possible, because the (implicit) codes here are already
ordered from left-to-right in the tree and because the codelengths
are increasing, which implies that mapping from VLC entries to the
corresponding entries used to initialize the VLC is monotonically
increasing. This means that one can reuse the right end of the
destination RL VLC to store the tables used to initialize the VLC
with.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible because the codes are already ordered
from left to right in the tree. It avoids having to create
the codes ourselves and will enable the codes table
to be removed altogether once the encoder stops using it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Right now, it is nearly ordered by "left codes in the tree first";
the only exception is the escape value which has been put at the
end. This commit moves it to the place it should have according
to the above order. This is in preparation for further commits.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This matches a similar cap on the number of automatic threads
in libavcodec/pthread_slice.c.
On systems with lots of cores, this fixes a couple fate failures
in 32 bit mode on such machines (where spawning a huge number of
threads runs out of address space).
Signed-off-by: Martin Storsjö <martin@martin.st>
Instead of the potentially adjusted ones. Otherwise, if config_props() is
called again and if using force_original_aspect_ratio, the already adjusted
values could be altered again.
Example command line
scale=size=1920x1000:force_original_aspect_ratio=decrease:force_divisible_by=2
user value 1920x1000 -> 1920x798 on init_dict() -> 1918x798 on frame
change when eval_mode == EVAL_MODE_INIT, which after e645a1ddb9 could be at the
very first frame.
Signed-off-by: James Almer <jamrial@gmail.com>
This state is not refcounted, so make sure it always has a well-defined
owner.
Remove the block added in 091341f2ab, as
this commit also solves that issue in a more general way.
Mention:
- that it is legacy and optional (every hwaccel that uses it can also
work with hwcontext, though some optional information can only be
signalled throught hwaccel_context)
- that it can be used for encoders (only qsvenc currently)
- ownership and lifetime
This commit implements an iMDCT in pure assembly.
This is capable of processing any mod-8 transforms, rather than just
power of two, but since power of two is all we have assembly for
currently, that's what's supported.
It would really benefit if we could somehow use the C code to decide
which function to jump into, but exposing function labels from assebly
into C is anything but easy.
The post-transform loop could probably be improved.
This was somewhat annoying to write, as we must support arbitrary
strides during runtime. There's a fast branch for stride == 4 bytes
and a slower one which uses vgatherdps.
Zen 3 benchmarks for stride == 4 for old (av_imdct_half) vs new (av_tx):
128pt:
2811 decicycles in av_tx (imdct),16775916 runs, 1300 skips
3082 decicycles in av_imdct_half,16776751 runs, 465 skips
256pt:
4920 decicycles in av_tx (imdct),16775820 runs, 1396 skips
5378 decicycles in av_imdct_half,16776411 runs, 805 skips
512pt:
9668 decicycles in av_tx (imdct),16775774 runs, 1442 skips
10626 decicycles in av_imdct_half,16775647 runs, 1569 skips
1024pt:
19812 decicycles in av_tx (imdct),16777144 runs, 72 skips
23036 decicycles in av_imdct_half,16777167 runs, 49 skips
Inside a function, the second ';' in ";;" is just a null statement,
but it is actually illegal outside of functions. Compilers
nevertheless accept it without warning, except when in -pedantic
mode when e.g. Clang emits a -Wextra-semi warning. Therefore
remove the unnecessary ';'.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The field is not specific to Opus.
The mp2fixed encoder signals initial_padding and is used
by both the matroska-encoding-delay test as well as
the lavf-mkv tests which necessitated several FATE ref changes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Matroska requires pts to be >= 0 with a slight exception:
It has a mechanism to deal with codec delay, i.e. with
the data added at the beginning that does not correspond
to actual input data and should be discarded by the player.
Only the audio actually intended to be output needs to have
a timestamp >= 0.
In order to avoid unnecessary timestamp shifting, this patch
allows muxers to inform the shifting code about this so that
it can take it into account.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Matroska generally requires timestamps to be nonnegative, but
there is an exception: Data that corresponds to encoder delay
and is not supposed to be output anyway can have a negative
timestamp. This is achieved by using the CodecDelay header
field: The demuxer has to subtract this value from the raw
(nonnegative) timestamps of the corresponding track.
Therefore the muxer has to add this value first to write
this raw timestamp.
Support for writing CodecDelay has been added in FFmpeg commit
d92b1b1bab and in Libav commit
a1aa37dd0b. The former simply
wrote the header field and did not apply any timestamp offsets,
leading to desynchronisation (if one uses multiple tracks).
The latter applied it at two places, but not at the one where
it actually matters, namely in mkv_write_block(), leading to
the same desynchronisation as with the former commit. It furthermore
used the wrong stream timebase to convert the delay to the
stream's timebase, as the conversion used the timebase from
before avpriv_set_pts_info().
When the latter was merged in 82e4f39883,
it was only done in a deactivated state that still did not
offset the timestamps when muxing due to "assertion failures
and av sync errors". a1aa37dd0b
made it definitely more likely to run into assertion failures
(namely if the relative block timestamp doesn't fit into an int16_t).
Yet all of the above issues have been fixed (in commits
962d631573,
5d3953a5dc and
4ebeab15b0. This commit therefore
enables applying CodecDelay, fixing ticket #7182.
There is just one slight regression from this: If one has input
with encoder delay where the first timestamp is negative, but
the pts of the part of the data that is actually intended to be
output is nonnegative, then the timestamps will currently by default
be shifted to make them nonnegative before they reach the muxer;
the muxer will then ensure that the shifted timestamps are retained.
Before this commit, the muxer did not ensure this; instead the
timestamps that the demuxer will output were shifted and
if the first timestamp of the actually intended output was zero
before shifting, then this unintentional shift just cancels
the shift performed before the packet reached the muxer.
(But notice that this only applies if all the tracks use the same
CodecDelay, or the relative sync between tracks will be impaired.)
This happens in the matroska-opus-remux and matroska-ogg-opus-remux
FATE tests. Future commits will forward the information that
the Matroska muxer has a limited capability to handle negative
timestamps so that the shifting in libavformat can take advantage
of it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
