suppose
a. You have 3 frames, 0, 1, 4096.
b. The ltMask is 0xfff and use_msb is 0.
c. The 0, 1 are lt refs for 4096.
d. you are decoding frame 4096, and get the 0 frame.
Since 4096 & ltMask is 0 too, even you want get 0, find_ref_idx may give you 4096.
add_candidate_ref will report an error for this
Tested-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: Xu Guangxin <guangxin.xu@intel.com>
We will generate a new frame for a missed reference. The frame can only
be used for reference. We assign an invalid decode sequence to it, so
it will not be involved in any dpb process.
Tested-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: Xu Guangxin <guangxin.xu@intel.com>
According to C.5.2.2, item 2. When we got an IRAP, and the
NoOutputOfPriorPicsFlag = 0, we need bump all outputable frames.
Tested-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: Xu Guangxin <guangxin.xu@intel.com>
It used to be allocated separately, so that the pointer to it
is copied to all HEVCContexts, so that all slice-threads
use the same. This is completely unnecessary now that there
is only one HEVCContext any more. There is just one minor
complication left: The slice-threads only get a pointer to
const HEVCContext, but they need to modify the common CABAC
state. Fix this by adding a pointer to the common CABAC state
to HEVCLocalContext and document why it exists.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
While just at it, also use av_calloc() instead of zeroing
the array ourselves in a loop.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Actually, ff_slice_thread_allocz_entries() always already
allocates zeroed entries, so ff_reset_entries() was already
unnecessary. Make this more clear by renaming it to
ff_slice_thread_allocz_entries().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The HEVC decoder has both HEVCContext and HEVCLocalContext
structures. The latter is supposed to be the structure
containing the per-slicethread state.
Yet up until now that is not how it is handled in practice:
Each HEVCLocalContext has a unique HEVCContext allocated for it
and each of these coincides except in exactly one field: The
corresponding HEVCLocalContext. This makes it possible to pass
the HEVCContext everywhere where logically a HEVCLocalContext
should be used. And up until recently, this is how it has been done.
Yet the preceding patches changed this, making it possible
to avoid allocating redundant HEVCContexts.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Right now the code passes a list of ints whose entry #i
is just i as opaque parameter to hls_decode_entry_wpp
via execute2; said list is even constantly allocated and freed.
This commit stops doing so and instead passes the list of
HEVCLocalContext* instead, so that the main HEVCContext
can be avoided in accessing the HEVCLocalContext.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The HEVC decoder has both HEVCContext and HEVCLocalContext
structures. The latter is supposed to be the structure
containing the per-slicethread state.
Yet that is not how it is handled in practice: Each HEVCLocalContext
has a unique HEVCContext allocated for it and each of these
coincides except in exactly one field: The corresponding
HEVCLocalContext. This makes it possible to pass the HEVCContext
everywhere where logically a HEVCLocalContext should be used.
This commit stops doing this for lavc/hevcdec.c itself.
It also constifies what can be constified in order to make
the nonconst stuff stand out more.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The HEVC decoder has both HEVCContext and HEVCLocalContext
structures. The latter is supposed to be the structure
containing the per-slicethread state.
Yet that is not how it is handled in practice: Each HEVCLocalContext
has a unique HEVCContext allocated for it and each of these
coincides except in exactly one field: The corresponding
HEVCLocalContext. This makes it possible to pass the HEVCContext
everywhere where logically a HEVCLocalContext should be used.
This commit stops doing this for lavc/hevcpred as well as
the corresponding mips code; the latter is untested.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The HEVC decoder has both HEVCContext and HEVCLocalContext
structures. The latter is supposed to be the structure
containing the per-slicethread state.
Yet that is not how it is handled in practice: Each HEVCLocalContext
has a unique HEVCContext allocated for it and each of these
coincides except in exactly one field: The corresponding
HEVCLocalContext. This makes it possible to pass the HEVCContext
everywhere where logically a HEVCLocalContext should be used.
This commit stops doing this for lavc/hevc_cabac.c; it also constifies
everything that is possible in order to ensure that no slice thread
accidentally modifies the main HEVCContext state.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The HEVC decoder has both HEVCContext and HEVCLocalContext
structures. The latter is supposed to be the structure
containing the per-slicethread state.
Yet that is not how it is handled in practice: Each HEVCLocalContext
has a unique HEVCContext allocated for it and each of these
coincides with the main HEVCContext except in exactly one field:
The corresponding HEVCLocalContext.
This makes it possible to pass the HEVCContext everywhere where
logically a HEVCLocalContext should be used.
This led to confusion in the first version of what eventually became
commit c8bc0f66a875bc3708d8dc11b757f2198606ffd7:
Before said commit, the initialization of the Rice parameter derivation
state was incorrect; the fix for single-threaded as well as
frame-threaded decoding was to add backup stats to HEVCContext
that are used when the cabac state is updated*, see
https://ffmpeg.org/pipermail/ffmpeg-devel/2020-August/268861.html
Yet due to what has been said above, this does not work for
slice-threading, because the each HEVCLocalContext has its own
HEVCContext, so the Rice parameter state would not be transferred
between threads.
This is fixed in c8bc0f66a875bc3708d8dc11b757f2198606ffd7
by a hack: It rederives what the previous thread was and accesses
the corresponding HEVCContext.
Fix this by treating the Rice parameter state the same way
the ordinary CABAC parameters are shared between threads:
Make them part of the same struct that is shared between
slice threads. This does not cause races, because
the parts of the code that access these Rice parameters
are a subset of the parts of code that access the CABAC parameters.
*: And if the persistent_rice_adaptation_enabled_flag is set.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The HEVC decoder has both HEVCContext and HEVCLocalContext
structures. The latter is supposed to be the structure
containing the per-slicethread state.
Yet that is not how it is handled in practice: Each HEVCLocalContext
has a unique HEVCContext allocated for it and each of these
coincides with the main HEVCContext except in exactly one field:
The corresponding HEVCLocalContext.
This makes it possible to pass the HEVCContext everywhere where
logically a HEVCLocalContext should be used.
This commit stops doing this for lavc/hevc_filter.c; it also constifies
everything that is possible in order to ensure that no slice thread
accidentally modifies the main HEVCContext state.
There are places where this was not possible, namely with the SAOParams
in sao_filter_CTB() or with sao_pixels_buffer_h in copy_CTB_to_hv().
Both of these instances lead to data races, see
https://fate.ffmpeg.org/report.cgi?time=20220629145651&slot=x86_64-archlinux-gcc-tsan-slices
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The HEVC decoder has both HEVCContext and HEVCLocalContext
structures. The latter is supposed to be the structure
containing the per-slicethread state.
Yet that is not how it is handled in practice: Each HEVCLocalContext
has a unique HEVCContext allocated for it and each of these
coincides except in exactly one field: The corresponding
HEVCLocalContext. This makes it possible to pass the HEVCContext
everywhere where logically a HEVCLocalContext should be used.
This commit stops doing this for lavc/hevc_mvs.c; it also constifies
everything that is possible in order to ensure that no slice thread
accidentally modifies the main HEVCContext state.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is safe for a slice thread to read the main context
and therefore it is safe to add a pointer to const HEVCContext
(namely the parent context) to each HEVCLocalContext.
It is also safe (and actually redundant) to add a pointer
to a logcontext to HEVCLocalContext.
Doing so allows to pass the HEVCLocalContext as context in
the parts of the code that is run slice-threaded when slice-threading
is in use (currently these parts of the code use ordinary
HEVCContext*). This way one is not tempted to modify
the main context from the slice contexts.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The slicethread contexts need to be initialized for
every frame, not only the first one, so one can
remove the initialization when allocating these contexts,
because the ordinary per-frame initialization will
initialize them again just a few lines below.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is overridden by ff_add_bytes_l2_sse2() on any non-ancient CPU.
Reviewed-by: Henrik Gramner <henrik@gramner.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Otherwise, there is no guarantee that the various av_log-messages
are not interrupted by another log statement. The latter may originate
from anywhere else, even the HEVC decoder itself, as happens when
one uses frame-threading to decode the BUMPING_A_ericsson_1.bit
sample from the FATE-suite.
Furthermore, the earlier approach suffered from the fact that
various parts of the logmsg were output with different loglevels
and that checking stopped after having encountered the first
plane with MD5 mismatch, although it is probably interesting to
know whether other planes are incorrect, too.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
encode_block() in svq1enc.c looks like the following:
static int encode_block(int block[7][256], int level)
{
int best_score = 0;
for (unsigned x = 0; x < level; x++) {
int v = block[1][x];
block[level][x] = 0;
best_score += v * v;
}
if (level > 0 && best_score > 64) {
int score = 0;
score += encode_block(block, level - 1);
score += encode_block(block, level - 1);
if (score < best_score) {
best_score = score;
}
}
return best_score;
}
When called from outside of encode_block(), it is always called with
level == 5.
This triggers a bug [1] in GCC: On -O3, it creates eight clones of
encode_block with different values of level inlined into it. The clones
with negative values are of course useless*, but they also lead to
-Warray-bounds warnings, because they access block[-1].
This has been mitigated in GCC 12: It no longer creates clones
for parameters that it knows are impossible. Somehow switching levels
to unsigned makes GCC know this. Therefore this commit does this.
(For GCC 11, this changes the warning to "array subscript 4294967295 is
above array bounds" from "array subscript -1 is below array bounds".)
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102513
*: These clones can actually be discarded when compiling with
-ffunction-sections.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
filter_mb_mbaff_edgev() and filter_mb_mbaff_edgecv()
have a function parameter whose expected size depends upon
another parameter: It is 2 * bsi + 1 (with bsi always being 1 or 2).
This array is declared as const int16_t[7], yet some of the callers
with bsi == 1 call it with only an const int16_t[4] available.
This leads to -Wstringop-overread warnings from GCC 12.1.
This commit fixes these by replacing [7] with [/* 2 * bsi + 1 */],
so that the expected range and its dependence on bsi is immediately
visible.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
check_block_inter() currently does this when calling check_block().
This leads to a -Wstringop-overflow= warning when compiling with
GCC 12.1.
Given that the main part of the body of check_block() consists
of an "if (intra) { ... } else { ... }" which is true iff
check_block() is not called from check_block_inter(),
it makes sense to fix this by just inlining check_block()
check_block_inter() and turning check_block() into a new
check_block_intra() (with the inter parts removed, of course).
This should also not make much of a difference for the generated code
given that both check_block() as well as check_block_inter()
are already marked as av_always_inline, so this commit follows
this route to fix the issue.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: out of array access
Fixes: 49271/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HEVC_fuzzer-5424984922652672
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: Division by 0
Fixes: 49235/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TIFF_fuzzer-5495613847896064
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The amount of padding samples reported by containers take into account the
extended samplerate in HE-AAC.
Fixes ticket #9671.
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes: infinite loop
Fixes: 49223/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HDR_fuzzer-6603308596330496
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Using parameter from AVCodecContext to reset qsv codec is more suitable
for MFXVideoENCODE_Reset()'s usage. Per-frame metadata is more suitable
for the usage of mfxEncodeCtrl being passed to
MFXVideoENCODE_EncodeFrameAsync(). Now change it to use the value
from AVCodecContext.
Because q->param is passed to both "in" and "out" parameters when call
MFXVideoENCODE_Query(), the value in q->param may be changed. New
variables are added to store old configuration, so that we can detect
real parameter change.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Dividing one line log into several av_log() call is not thread safe. Now
merge these strings into one av_log() call.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
It need not be writable; in fact, it is often not writable even if
the packet sent to the decoder was writable, because the generic code
calls av_packet_ref() on it. It is never writable if a user
drains the decoder after every packet, because in this case the decode
callback is called from avcodec_send_packet().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
wrapped_avframe_decode() uses an AVFrame as dst in av_frame_move_ref()
after having called ff_decode_frame_props() to attach side-date
to this very frame. This leaks all the side-data and metadata
that ff_decode_frame_props() has attached.
This happens in various fate-filter-metadata tests since
6ca43a9675d651d7ea47c7ba2fafb1bf831c4d0b.
These particular leaks (which affect metadata-only)
could be fixed by not adding metadata side-data to AVPackets
in libavdevice if they are also available from the AVFrames.
Yet this would break users that extract the metadata from
AVPackets.
The changes to FATE happen because of the way av_dict_set()
works when it overwrites an already existing entry:
It overwrites the entry to be overwritten with the last entry
and adds the new entry at the end. The end result is that
the first entry of the dict is the second-to-last-entry of
the original dict, the last entry of the dict is the last
entry of the old dict and the first count - 2 entries
of the original dict are at positions 1..count - 2 in their
original order.
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
and remove FF_CODEC_CAP_INIT_THREADSAFE
All our native codecs are already init-threadsafe
(only wrappers for external libraries and hwaccels
are typically not marked as init-threadsafe yet),
so it is only natural for this to also be the default state.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is in preparation of switching the default init-thread-safety
to a codec being init-thread-safe.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This patch prevents the libjxl encoder wrapper from failing to
encode images when the input video has untagged primaries. It will
instead assume BT.709/sRGB primaries and print a warning.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
The max height is currently documented as 16; the max difference per
pixel is 255, and a .8h element can easily contain 16*255, thus keep
accumulating in two .8h vectors, and just do the final accumulationat the
end. This should work for heights up to 256.
This requires a minor register renumbering in ff_pix_abs16_xy2_neon.
Before: Cortex A53 A72 A73 Graviton 3
pix_abs_0_0_neon: 97.7 47.0 37.5 22.7
pix_abs_0_1_neon: 154.0 59.0 52.0 25.0
pix_abs_0_3_neon: 179.7 96.7 87.5 41.2
After:
pix_abs_0_0_neon: 96.0 39.2 31.2 22.0
pix_abs_0_1_neon: 150.7 59.7 46.2 23.7
pix_abs_0_3_neon: 175.7 83.7 81.7 38.2
Signed-off-by: Martin Storsjö <martin@martin.st>
Using absolute-difference-accumulate does use twice the amount of
absolute-difference instructions, but avoids the need for the
uaddl and add instructions, reducing the total number of instructions
by 3.
These can be interleaved in the rest of the calculation, to avoid
tight dependencies at the end. Unfortunately, this is marginally
slower on Cortex A53, but faster on A72 and A73.
Before: Cortex A53 A72 A73 Graviton 3
pix_abs_0_3_neon: 175.7 109.2 92.0 41.2
After:
pix_abs_0_3_neon: 179.7 96.7 87.5 41.2
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes: out of array access
Fixes: 48799/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_LAGARITH_fuzzer-4764457825337344
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Provide neon implementation for pix_abs16_x2 function.
Performance tests of implementation are below.
- pix_abs_0_1_c: 283.5
- pix_abs_0_1_neon: 39.0
Benchmarks and tests run with checkasm tool on AWS Graviton 3.
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
