Based on the work of Jeff Moguillansky <Jeff.Moguillansky@am.sony.com>.
See thread:
Subject: [FFmpeg-devel] x11 output device for libavdevice
Date: Wed, 10 Apr 2013 23:10:47 +0000
* commit '2d2d6a4883479403798f4ed46941d5b365823570':
lavf: add a raw WavPack muxer.
apetag: add support for writing APE tags
matroskaenc: support muxing WavPack
Conflicts:
libavformat/Makefile
libavformat/allformats.c
libavformat/apetag.h
libavformat/version.h
libavformat/wvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '728214992e3698305550c1762f973d2ac567f016':
vc1dec: Remove interlaced warning
vc1dec: Fix mixed field/frame intensity compensation
vc1dec: Match addressing between compensation and MC in vc1_mc_4mv_chroma4
vc1dec: Handle top and bottom blocks in vc1_mc_4mv_chroma4() differently if needed
vc1dec: Fix doxy for vc1_mc_4mv_chroma4()
vc1dec: Drop old use_ic code from vc1_b_mc
vc1: Use shuffled use_ic instead of equally shuffled mv_mode
vc1dec: Implement intensity compensation for vc1_interp_mc()
Conflicts:
Changelog
libavcodec/vc1dec.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some fixes provided by Paul B Mahol <onemda@gmail.com>
and Michael Niedermayer <michaelni@gmx.at> and me.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
* commit 'e3b225a4fe0ff1e64a220b757c6f0a5cf9258521':
matroskaenc: add an option to put the index at the start of the file
Conflicts:
doc/muxers.texi
libavformat/matroskaenc.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a83c0da539fb07260310bc3b34056239d2b138b2':
avconv: make -t insert trim/atrim filters.
The filter insertion code is merged but disabled as it is buggy.
For example it fails in various ways when used with -s with some files.
Also the trimming is arguably less accurate than the default without
filters in some cases.
These issues should be fixed before auto inserting the filters,
until then the user can explicitly add a trim/atrim filter when one is
wanted.
Conflicts:
Changelog
ffmpeg.c
ffmpeg_filter.c
tests/ref/fate/bethsoft-vid
tests/ref/lavf/aiff
tests/ref/lavf/asf
tests/ref/lavf/au
tests/ref/lavf/avi
tests/ref/lavf/dpx
tests/ref/lavf/ffm
tests/ref/lavf/gxf
tests/ref/lavf/jpg
tests/ref/lavf/mkv
tests/ref/lavf/mmf
tests/ref/lavf/mov
tests/ref/lavf/mpg
tests/ref/lavf/nut
tests/ref/lavf/ogg
tests/ref/lavf/pcx
tests/ref/lavf/png
tests/ref/lavf/rm
tests/ref/lavf/ts
tests/ref/lavf/voc
tests/ref/lavf/voc_s16
tests/ref/lavf/wav
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes -t sample-accurate for audio and will allow further
simplication in the future.
Most of the FATE changes are due to audio now being sample accurate. In
some cases a video frame was incorrectly passed with the old code, while
its was over the limit.
vidstabdetect and vidstabtransform common functions for interfacing
vid.stab are in libavfilter/vidstabutils.c
Signed-off-by: Georg Martius <martius@mis.mpg.de>
Based on the 2007 GSoC project from Kamil Nowosad <k.nowosad@students.mimuw.edu.pl>
Updated to current programming standards, style and many more small
fixes by Diego Biurrun <diego@biurrun.de>.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA
markup is muxed in a standalone .ass/.ssa file. This means the AVPacket
data starts with a "Dialogue:" string, followed by a timing information
(start and end of the event as string) and a trailing CRLF after each
line. One packet can contain several lines. We'll refer to this layout
as "SSA" or "SSA lines".
In matroska, this markup is not stored as such: it has no "Dialogue:"
prefix, it contains a ReadOrder field, the timing information is not in
the payload, and it doesn't contain the trailing CRLF. See [1] for more
info. We'll refer to this layout as "ASS".
Since we have only one common codec for both formats, the matroska
demuxer is constructing an AVPacket following the "SSA lines" format.
This causes several problems, so it was decided to change this into
clean ASS packets.
Some insight about what is changed or unchanged in this commit:
CODECS
------
- the decoding process still writes "SSA lines" markup inside the ass
fields of the subtitles rectangles (sub->rects[n]->ass), which is
still the current common way of representing decoded subtitles
markup. It is meant to change later.
- new ASS codec id: AV_CODEC_ID_ASS (which is different from the
legacy AV_CODEC_ID_SSA)
- lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of
"ass") for consistency with the codec id and allows to add a real
ass decoder. This ass decoder receives clean ASS lines (so it starts
with a ReadOrder, is followed by the Layer, etc). We make sure this
is decoded properly in a new ass-line rectangle of the decoded
subtitles (the ssa decoder OTOH is doing a simple straightforward
copy). Using the packet timing instead of data string makes sure the
ass-line now contains the appropriate timing.
- lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed
into "ssa" (instead of "ass") for consistency with the codec id, and
allows to add a real "ass" encoder.
One important thing about this encoder is that it only supports one
ass rectangle: we could have put several dialogue events in the
AVPacket (separated by a \0 for instance) but this would have cause
trouble for the muxer which needs not only the start time, but also
the duration: typically, you have merged events with the same start
time (stored in the AVPacket->pts) but a different duration. At the
moment, only the matroska do the merge with the SSA-line codec.
We will need to make sure all the decoders in the future can't add
more than one rectangle (and only one Dialogue line in it
obviously).
FORMATS
-------
- lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets.
In the case of ASS packets as input, it adds the timing based on the
AVPacket pts and duration, and mux it with "Dialogue:", trailing
CRLF, etc.
- lavf/assdec: unchanged; it currently still only outputs SSA-lines
packets.
- lavf/mkv: the demuxer can now output ASS packets without the need of
any "SSA-lines" reconstruction hack. It will become the default at
next libavformat bump, and the SSA support will be dropped from the
demuxer. The muxer can take ASS packets since it's muxed normally,
and still supports the old SSA packets. All the SSA support and
hacks in Matroska code will be dropped at next lavf bump.
[1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
