The new format (given in big/little endian forms) matches the
existing X2RGB10 format, except with B and R channels switched.
AV_PIX_FMT_X2BGR10 data often is created by OpenGL programs
whose buffers use the GL_RGB10 internal format.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It does the same as av_calloc(), so one of them should be removed.
Given that av_calloc() has the shorter name, it is retained.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Unused since 1f63665ca5.
Found-by: Soft Works <softworkz@hotmail.com>
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is supported only by a few decoders (h263, h263p, mpeg(1|2|)video
and mpeg4) and is entirely redundant with parsers. Furthermore, using
it leads to missing frames, as flushing the decoder at the end does not
work properly.
Co-authored-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Microsoft VideoProcessor requires texture with D3DUSAGE_RENDERTARGET flag as output.
There is no way to allocate array of textures with D3D11_BIND_RENDER_TARGET flag
and .ArraySize > 2 by ID3D11Device_CreateTexture2D due to the Microsoft limitation.
Adding AVD3D11FrameDescriptors array to store array of single textures
instead of texture with multiple slices resolves this.
Signed-off-by: Artem Galin <artem.galin@intel.com>
ff_pnm_parser and ff_vp3_parser already hit the current limit;
an addition to the former (to handle pfm) is planned.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is unnecessary as the number of static inputs and outputs can now
be directly read via AVFilter.nb_(in|out)puts.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is intended as replacement for avfilter_pad_count(). In contrast to
the latter, it avoids a loop.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In particular, document that av_opt_copy() always disentangles
allocated options even on error; this guarantee is needed to e.g.
properly free duplicated thread contexts in libavcodec on error.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The reason why the generic av_image_copy_uc_from() doesn't really
fit in the case for Vulkan is because some planes may be copied via
other methods (such as mapping GPU memory), and if they don't satisfy
the strict alignment requirements, a gpu image->gpu buffer->cpu ram
copy is performed.
We need this for hwcontext_vulkan, and I think this will also be
useful to API users like libplacebo who would rather not write
a custom SIMD memcpy.
common.h currently contains several things: Math macros, UTF-8 macros,
other fundamental macros; furthermore it also contains miscellaneous
math functions and it (directly and indirectly) includes lots of other
headers.
This commit moves the "other fundamental macros" to macros.h which is
a more fitting place.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
HDR10+ metadata is stored in the bit stream for HEVC. The story is
different for VP9 and cannot store the metadata in the bit stream.
HDR10+ should be passed to packet side data an stored in the container
(mkv) for VP9.
This CL is taking HDR10+ from AVFrame side data in libvpxenc and is
passing it to the AVPacket side data.
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Zern <jzern@google.com>
It can be useful to library users, and is currently being used by ffmpeg.c
Suggested-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This also allows to exclusively use pointers to const AVCodec in
fftools/ffmpeg_opt.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Deprecated in c29038f304.
The resample filter based upon this library has been removed as well.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
av_adler32_update() is used by av_hash_update() which will be switched
to size_t at the next bump. So it also has to be made to use size_t.
This is also necessary for framecrcenc.c, because the size of side data
will become a size_t, too.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
64 bits are needed in order to retain the uid values of Matroska
chapters; the type is kept signed because the semantics of NUT chapters
depend upon whether the id is > 0 or < 0.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This cap is currently used to mark multithreading-capable codecs that
wrap external libraries with their own multithreading code. The name is
highly confusing for our API users, since libavcodec ALWAYS handles
thread_count=0 (see commit message in previous commit). Therefore rename
the cap and update its documentation to make its meaning clear.
The old name is kept deprecated until next+1 major bump.
This callback is functionally the same as get_buffer2() is for decoders, and
implements for the new encode API the functionality of the old encode API had
where the user could provide their own buffers.
Reviewed-by: Lynne <dev@lynne.ee>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: James Almer <jamrial@gmail.com>
av_stream_add_side_data() already defines size as a size_t, so this makes it
consistent across all side data functions.
Signed-off-by: James Almer <jamrial@gmail.com>
av_packet_add_side_data() already defines size as a size_t, so this makes it
consistent across all side data functions
Signed-off-by: James Almer <jamrial@gmail.com>
Enables the usage of such values as AV_EF_EXPLODE in encoders, which
can be useful in cases such as subtitle encoders where they have the
responsibility to validate the correctness of an incoming ASS dialog line.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
This flag was added in 492026209b
in conjunction with av_demuxer_open() to allow to pass private
options to demuxers. It worked as follows: av_open_input_stream()
(the predecessor of avformat_open_input()) would not call the
read_header function if this flag is set. Instead the user could set
private options of the demuxer via the format's private class after
avformat_open_input() and then call av_demuxer_open() which called
the format's read_header function.
This approach was abandoned in e37f161e66
and av_demuxer_open() deprecated; instead the AVDictionary based way of
passing private options to the demuxer was choosen. Yet
AVFMT_FLAG_PRIV_OPT has never been deprecated and av_demuxer_open()
never removed. This commit implements the deprecation of the flag and
schedules av_demuxer_open for removal on the next major bump.
Given that av_demuxer_open() has been deprecated in 2012 and that this
flag is useless without it, the flag will be ignored after the next
major version bump.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
AVFrame hasn't been a struct defined in libavcodec for a decade now, when
it was moved to libavutil.
Found-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This commit adds support for in-place FFT transforms. Since our
internal transforms were all in-place anyway, this only changes
the permutation on the input.
Unfortunately, research papers were of no help here. All focused
on dry hardware implementations, where permutes are free, or on
software implementations where binary bloat is of no concern so
storing dozen times the transforms for each permutation and version
is not considered bad practice.
Still, for a pure C implementation, it's only around 28% slower
than the multi-megabyte FFTW3 in unaligned mode.
Unlike a closed permutation like with PFA, split-radix FFT bit-reversals
contain multiple NOPs, multiple simple swaps, and a few chained swaps,
so regular single-loop single-state permute loops were not possible.
Instead, we filter out parts of the input indices which are redundant.
This allows for a single branch, and with some clever AVX512 asm,
could possibly be SIMD'd without refactoring.
The inplace_idx array is guaranteed to never be larger than the
revtab array, and in practice only requires around log2(len) entries.
The power-of-two MDCTs can be done in-place as well. And it's
possible to eliminate a copy in the compound MDCTs too, however
it'll be slower than doing them out of place, and we'd need to dirty
the input array.
It has been added in 6db42a2b6b,
yet since then none of the necessary create/free_device_capabilities
functions has been implemented, making this API completely useless.
Because of this one can already simplify
avdevice_capabilities_free/create and can already remove the function
pointers at the next major bump; given that the documentation explicitly
states that av_device_capabilities is not to be used by a user, it's
options can already be removed (save for the sentinel).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Do it only when requested with the AV_CODEC_EXPORT_DATA_VIDEO_ENC_PARAMS
flag.
Drop previous code using the long-deprecated AV_FRAME_DATA_QP_TABLE*
API. Temporarily disable fate-filter-pp, fate-filter-pp7,
fate-filter-spp. They will be reenabled once these filters are converted
in following commits.
They add considerable complexity to frame-threading implementation,
which includes an unavoidably leaking error path, while the advantages
of this option to the users are highly dubious.
It should be always possible and desirable for the callers to make their
get_buffer2() implementation thread-safe, so deprecate this option.
This patch introduces a new frame side data type AVFilmGrainParams for use
with video codecs which support it.
It can save a lot of memory used for duplicate processed reference frames and
reduce copies when applying film grain during presentation.
A common pattern e.g. in libavcodec is replacing/updating buffer
references: unref old one, ref new one. This function allows simplifying
such code and avoiding unnecessary refs+unrefs if the references are
already equivalent.
Requires some extraneous top side and bottom front channels to be
defined.
According to STD-B59v2, the defined channel layout is:
- FL
- FR
- FC
- LFE1
- BL
- BR
- FLc
- FRc
- BC
- LFE2
- SiL
- SiR
- TpFL
- TpFR
- TpFC
- TpC
- TpBL
- TpBR
- TpSiL
- TpSiR
- TpBC
- BtFC
- BtFL
- BtFR
This utility helps avoid undefined behavior when doing things like
checking how much memory we need to allocate for an image before we have
allocated a buffer.
Signed-off-by: Brian Kim <bkkim@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Use opaque iteration state instead of the previous child class. This
mirrors similar changes done in lavf/lavc.
Deprecate the av_opt_child_class_next() API.
This allows for users who derive devices to set options for the
new device context they derive.
The main use case of this is to allow users to enable extensions
(such as surface drawing extensions) in Vulkan while deriving from
the device their frames are on. That way, users don't need to write
any initialization code themselves, since the Vulkan spec invalidates
mixing instances, physical devices and active devices.
Apart from Vulkan, other hwcontexts ignore the opts argument since they
don't support options at all (or in VAAPI and OpenCL's case, options are
currently only used for device selection, which device_derive overrides).
This will be used for AVCodecContext->profile. By specifying constants in the
encoders we won't have to use the common AVCodecContext options table and
different encoders can use the same profile name even with different values.
Signed-off-by: Marton Balint <cus@passwd.hu>
Both are codec properties and not encoder capabilities. The relevant
AVCodecDescriptor.props flags exist for this purpose.
Signed-off-by: James Almer <jamrial@gmail.com>
This is intended to replace the deprecated the AV_FRAME_DATA_QP_TABLE*
API and extend it to a wider range of codecs.
In the future, it may also be extended to support other encoding
parameters such as motion vectors.
Additional changes by Anton Khirnov <anton@khirnov.net> with suggestions
by Lynne <dev@lynne.ee>.
Signed-off-by: Juan De León <juandl@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This solves a huge oversight - it lets users reliably use their own
AVVulkanDeviceContext. Otherwise, the extensions supplied and enabled
are not discoverable by anything outside of hwcontext_vulkan.
Also clarifies that any user-supplied VkInstance must be at least 1.1.
bump minor version for DOVI sidedata, because added the dovi_meta.h
as lavu API part. Also update APIchanges.
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Previously, there was no way to flush an encoder such that after
draining, the encoder could be used again. We generally suggested
that clients teardown and replace the encoder instance in these
situations. However, for at least some hardware encoders, the cost of
this tear down/replace cycle is very high, which can get in the way of
some use-cases - for example: segmented encoding with nvenc.
To help address that use case, we added support for calling
avcodec_flush_buffers() to nvenc and things worked in practice,
although it was not clearly documented as to whether this should work
or not. There was only one previous example of an encoder implementing
the flush callback (audiotoolboxenc) and it's unclear if that was
intentional or not. However, it was clear that calling
avocdec_flush_buffers() on any other encoder would leave the encoder in
an undefined state, and that's not great.
As part of cleaning this up, this change introduces a formal capability
flag for encoders that support flushing and ensures a flush call is a
no-op for any other encoder. This allows client code to check if it is
meaningful to call flush on an encoder before actually doing it.
I have not attempted to separate the steps taken inside
avcodec_flush_buffers() because it's not doing anything that's wrong
for an encoder. But I did add a sanity check to reject attempts to
flush a frame threaded encoder because I couldn't wrap my head around
whether that code path was actually safe or not. As this combination
doesn't exist today, we'll deal with it if it ever comes up.
This commit updates the documentation of av_read_frame() to match its
actual behaviour in several ways:
1. On success, av_read_frame() always returns refcounted packets.
2. It can handle uninitialized packets.
3. On error, it always returns blank packets.
This will allow callers to not initialize or unref unnecessarily.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
