Also remove AV_LOG_SIMULATE from the list as it is not used directly, and do
not use panic level on unknown loglevel, but make them warn. Also fix mapping of
NOTICE/INFO/VERBOSE and add documentation about when the option should actually
be used.
Signed-off-by: Marton Balint <cus@passwd.hu>
Maximum packet size is 10000 (RIST_MAX_PACKET_SIZE, which is unfortunately
private) minus the RIST protocol overhead which is 28 bytes for the unencrypted
case, 36 for the encrypted case.
Signed-off-by: Marton Balint <cus@passwd.hu>
Queue tracking makes no difference so remove it, return EAGAIN of no data is
available and rist data block needs to be freed even for zero sized packets.
Signed-off-by: Marton Balint <cus@passwd.hu>
Keep on reading fragments until we got fragment_size amount of data, otherwise
we might get frames with 1-2 samples only if pa_stream_peek is called slightly
less frequently than sample rate.
Note that fragments might contain a lot less data than fragment_size, so
reading multiple fragments to get fragment_size amount of data is intentional.
Signed-off-by: Marton Balint <cus@passwd.hu>
Otherwise we might return 1-2 samples per packet if av_read_frame() call rate is
only sligthly less than the stream sample rate.
Signed-off-by: Marton Balint <cus@passwd.hu>
If the window is resized it was possible that xpos pointed outside the
visualization texture. By rearranging the overflow check we make sure this (and
a crash) does not happen.
We also don't have to use xleft for start position, as that is 0 anyways, and
if we ever want to take into account xleft then the texture should be
positioned accordingly when rendering.
Signed-off-by: Marton Balint <cus@passwd.hu>
It only got added recently, and the new name makes it consistent with
product_version_num in the next patch.
Signed-off-by: Marton Balint <cus@passwd.hu>
av_gettime_relative() is using the monotonic clock therefore more suitable for
elapsed time calculations. Packet timestamps are still kept absolute, although
that should be configurable in the future.
Related to ticket #9089.
Signed-off-by: Marton Balint <cus@passwd.hu>
av_gettime_relative() is using the monotonic clock therefore more suitable for
relative time calculations.
Signed-off-by: Marton Balint <cus@passwd.hu>
The way SRT's async / epoll-based IO works is that the event status is stored
in the epoll containers. That is, if an event occurs on an SRT socket, and that
SRT socket isn't part of any epoll container, then that event is lost. If we
later add that socket to an epoll container, we still won't receive the event
even if it wasn't serviced.
Therefore we create the epoll and put the fd into it right after the connection
is established.
See http://lists.ffmpeg.org/pipermail/ffmpeg-devel/2021-January/275334.html
Signed-off-by: Marton Balint <cus@passwd.hu>
Sometimes there was a confusion between srt_*() function return values and
libavformat-style return values.
Signed-off-by: Marton Balint <cus@passwd.hu>
The patch changes the init function to initialize block dimensions to fixed
64x64 instead of the previously used image width/height based value.
This should not cause any actual change in behaviour because block dimensions
are recalculated on every keyframe in optimum_block_width() and
optimum_block_height() functions and in the current code the result is always
64x64 regardless of the image dimensions used.
Signed-off-by: Marton Balint <cus@passwd.hu>
This reverts commit 6696a07ac6.
It is wrong to restrict timecodes to always contain leading zeros or for hours
or frames to be 2 chars only.
Signed-off-by: Marton Balint <cus@passwd.hu>
These fields were added to support -merge_pmt_versions, but the mpegts demuxer
is also keeping track its programs internally, so that should be a better place
to handle it.
Also it is not a very good idea to keep fields like program_num or
pmt_stream_idx in an AVStream, because a single stream can be part of multiple
programs, multiple PMTs, so the stream attributes can refer to any program the
stream is part of.
Since they are not part of public API, lets simply remove them, or rather
replace them with placeholders for ABI compatibility with libavdevice.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also make sure we are checking the old state of the streams because otherwise
some streams might already have the newly parsed stream identifiers which
corrupts matching.
Fixes streams having the same identifier mixed up on pmt version change.
Fixes ticket #9006.
Signed-off-by: Marton Balint <cus@passwd.hu>
Otherwise there can be a small period when the programs only contain the PMT
pid.
Also make sure skip_clear only affects AVProgram clear, and that pmt_pid is
always kept as the first entry of the PID list of the programs. Also reject
PMTs for programs on the wrong PID.
Signed-off-by: Marton Balint <cus@passwd.hu>
PID 0 was removed from the pid list when then PMT was parsed, it is better
to explictly avoid it from being discarded instead of keeing it in the list of
every program.
Signed-off-by: Marton Balint <cus@passwd.hu>
av_new_program returns the existing program if that already exists, in that
case it makes no sense to overwrite existing attributes.
Signed-off-by: Marton Balint <cus@passwd.hu>
By using the frame counter (and the video time base) for audio pts we lose some
timestamp precision but we ensure that video and audio coming from the same DV
frame are always in sync.
This patch also makes timestamps after seek consistent and it should also fix
the timestamps when the audio clock is unlocked and have a completely
indpendent clock source. (E.g. runs on fixed 48009 Hz which should have been
exact 48000 Hz)
Fixes out of sync timestamps in ticket #8762.
Signed-off-by: Marton Balint <cus@passwd.hu>
mpegts_read_header stops parsing the file at the first PMT. However the check
that ensured this was wrong because streams can also be added before the first
PMT is received (e.g. EIT).
So let's make sure we are in the header reading phase by checking if ts->pkt is
unset instead of checking if the number of streams found so far is 0.
Signed-off-by: Marton Balint <cus@passwd.hu>
- Call srt_epoll_release() to avoid fd leak on libsrt_setup() error.
- Call srt_cleanup() on libsrt_open() failure.
- Fix return value and method on mode parsing failure.
Based on a patch by Nicolas Sugino <nsugino@3way.com.ar>.
Signed-off-by: Marton Balint <cus@passwd.hu>
This should increase the effectiveness of ffio_ensure_seekback by reducing the
number of buffer reallocations and memmoves/memcpys because even a small
seekback window requires max_buffer_size+window_size buffer space.
Signed-off-by: Marton Balint <cus@passwd.hu>
Previously ffio_ensure_seekback never flushed the buffer, so successive
ffio_ensure_seekback calls were all respected. This could eventually cause
unlimited memory and CPU usage if a demuxer called ffio_ensure_seekback on all
it's read data.
Most demuxers however only rely on being able to seek back till the position of
the last ffio_ensure_seekback call, therefore we change the semantics of
ffio_ensure_seekback so that a new call can invalidate seek guarantees of the
old. In order to support some level of "nested" ffio_ensure_seekback calls, we
document that the function only invalidates the old window (and potentially
discards the already read data from the IO buffer), if the newly requested
window does not fit into the old one.
This way we limit the memory usage for ffio_ensure_seekback calls requesting
consecutive data windows.
Signed-off-by: Marton Balint <cus@passwd.hu>
It was possible for the old code to seek back before the most recently read
data if start of a new multipart was across read boundaries. Now we read some
small sections multiple times to avoid this, but that is OK.
Signed-off-by: Marton Balint <cus@passwd.hu>
The new buf_size was detemined too conservatively, maybe because of the
off-by-one issue which was fixed recently in fill_buffer. We can safely
substract 1 more from the new buffer size, because max_buffer_size space must
only be guaranteed when we are reading the last byte of the requested window.
Comparing the new buf_size against filled did not make a lot of sense, what
makes sense is that we want to reallocate the buffer if the new buf_size is
bigger than the old, therefore the change in the check.
Signed-off-by: Marton Balint <cus@passwd.hu>
Existing code did not check if the requested seekback buffer is
already read entirely. In this case, nothing has to be done to guarantee
seekback.
Signed-off-by: Marton Balint <cus@passwd.hu>
There was an off-by-one error when checking if the IO buffer still has enough
space till the end. One more byte can be safely written.
Signed-off-by: Marton Balint <cus@passwd.hu>
Apparently bmdFormatUnspecified needs SDK 11.0. It is just a fancy way of
checking for zero, so let's do that instead.
Fixes build issue since f1b908d20a.
Signed-off-by: Marton Balint <cus@passwd.hu>
SMPTE 12M timecode can only count frames up to 39, because the tens-of-frames
value is stored in 2 bit. In order to resolve this 50/60 fps SMPTE timecode is
using the field bit (which is the same bit as the phase correction bit) to
signal the least significant bit of a 50/60 fps timecode. See SMPTE ST
12-1:2014 section 12.1.
Therefore we slightly change the format of the return value of
av_timecode_get_smpte_from_framenum and AV_FRAME_DATA_S12M_TIMECODE and start
using the previously unused Phase Correction bit as Field bit. (As the SMPTE
standard suggests)
We add 50/60 fps support to av_timecode_get_smpte_from_framenum by calling the
recently added av_timecode_get_smpte function in it which already handles this
properly.
This change affects the decklink indev and the DV and MXF muxers. MXF has no
fate test for 50/60fps content, DV does, therefore the changes.
MediaInfo (a recent version) confirms that half-frame timecode must be inserted
to DV. MXFInspect confirms valid timecode insertion to the System Item of MXF
files. For MXF, also see EBU R122.
Note that for DV the field flag is not used because in the HDV specs (SMPTE
370M) it is still defined as biphase mark polarity correction flag. So it
should not matter that the DV muxer overrides the field bit.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also query time only once, not for every variant stream, otherwise variant
streams might get a slightly different initial program date time. And we can
set this unconditionally because HLS_PROGRAM_DATE_TIME flag is checked
elsewhere.
Signed-off-by: Marton Balint <cus@passwd.hu>
Threaded input can increase smoothness of e.g. x11grab significantly. Before
this patch, in order to activate threaded input the user had to specify a
"dummy" additional input, with this change it is no longer required.
Signed-off-by: Marton Balint <cus@passwd.hu>
Max region ID is 87. Also the region affects not only the G0 charset but G2 and
the national subset as well.
Signed-off-by: Marton Balint <cus@passwd.hu>
The old resync logic had some bugs, for example the packet size could stuck
into 192 bytes, because pos47_full was not updated for every packet, and for
unseekable inputs the resync logic simply skipped some 0x47 sync bytes,
therefore the calculated distance between sync bytes was a multiple of 188
bytes.
AVIO only buffers a single packet (for UDP/mpegts, that usually means 1316
bytes), so for every ten consecutive 188-byte MPEGTS packets there was always a
seek failure, and that caused the old code to not find the 188 byte pattern
across 10 consecutive packets.
This patch changes the custom logic to the one which is used when probing to
determine the packet size. This was already proposed as a FIXME a long time
ago...
This change makes it possible for child encoders to define custom profile
option names which can be used for setting the AVCodecContext->profile.
Also rename unit name to something rather unique, so it won't be used elsewhere.
Signed-off-by: Marton Balint <cus@passwd.hu>
This will be used for AVCodecContext->profile. By specifying constants in the
encoders we won't have to use the common AVCodecContext options table and
different encoders can use the same profile name even with different values.
Signed-off-by: Marton Balint <cus@passwd.hu>
Generic retime functionality is replaced by a few lines of code directly in the
muxers which used it, which seems a lot easier to understand and this way the
retiming is not dependant of the input durations.
Also remove retimeinterleave, since it is not used by anything anymore.
Signed-off-by: Marton Balint <cus@passwd.hu>
And rename it to retimeinterleave, use the pcm_rechunk bitstream filter for
rechunking.
By seperating the two functions we hopefully get cleaner code.
Signed-off-by: Marton Balint <cus@passwd.hu>
Previously only 1:1 bitstream filters were supported, the end of the stream was
not signalled to the bitstream filters and time base changes were ignored.
This change also allows muxers to set up bitstream filters regardless of the
autobsf flag during write_header instead of during check_bitstream and those
bitstream filters will always be executed.
Signed-off-by: Marton Balint <cus@passwd.hu>
Sequence numbers of segments should be unique, if an encoder is using shorter
than 1 second segments and it is restarted, then future segments will be using
already used sequence numbers if initial sequence number is based on the number
of seconds since epoch and not microseconds.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes problems when non-rational options were set using rational expressions,
causing rounding errors and the option range limits not to be enforced
properly.
ffmpeg -f lavfi -i "sine=r=96000/2"
This caused an assertion failure with assert level 2.
Signed-off-by: Marton Balint <cus@passwd.hu>
Current muxers only use a single bitstream filter, so there is no need to
maintain code which operates on a list of bitstream filters. When multiple
bitstream filters are needed muxers can simply use a list bitstream filter.
If there is a use case in the future when different bitstream filters should be
added at subsequent packets then a new API possibly involving reconfiguring the
list bitstream filter can be added knowing the exact requirements.
Signed-off-by: Marton Balint <cus@passwd.hu>
Marton Balint