Benched using single-threaded full decode on an Ampere Altra.
Bpp Before After Speedup
8 73,3s 65,2s 1.124x
10 114,2s 104,0s 1.098x
12 125,8s 115,7s 1.087x
Signed-off-by: J. Dekker <jdek@itanimul.li>
Fixes the dxv3enc-dxt1 FATE test with UBSan and on big-endian
hardware.
Reviewed-by: James Almer <jamrial@gmail.com>
Tested-by: Sean McGovern <gseanmcg@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
FFmpeg has instances of DECLARE_ALIGNED(32, ...) in a lot of structs,
which then end up heap-allocated.
By declaring any variable in a struct, or tree of structs, to be 32 byte
aligned, it allows the compiler to safely assume the entire struct
itself is also 32 byte aligned.
This might make the compiler emit code which straight up crashes or
misbehaves in other ways, and at least in one instances is now
documented to actually do (see ticket 10549 on trac).
The issue there is that an unrelated variable in SingleChannelElement is
declared to have an alignment of 32 bytes. So if the compiler does a copy
in decode_cpe() with avx instructions, but ffmpeg is built with
--disable-avx, this results in a crash, since the memory is only 16 byte
aligned.
Mind you, even if the compiler does not emit avx instructions, the code
is still invalid and could misbehave. It just happens not to. Declaring
any variable in a struct with a 32 byte alignment promises 32 byte
alignment of the whole struct to the compiler.
This patch limits the maximum alignment to the maximum possible simd
alignment according to configure.
While not perfect, it at the very least gets rid of a lot of UB, by
matching up the maximum DECLARE_ALIGNED value with the alignment of heap
allocations done by lavu.
It is undefined behaviour.
Fixes many failed tests with UBSan and GCC 13 like
"src/libavformat/mov.c:4229:44: runtime error: store to address
0x5572abe20f80 with insufficient space for an object of type 'struct
MOVIndexRange'"
(The line number does not refer to the line where &entry[-1]
is assigned.)
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This reverts commit eee3b7e2fb.
It has been made in an attempt to fix UBSan test failures with
GCC 13 (see e.g. [1]), but it did not help at all. So revert it,
but use av_malloc_array() instead of going back to av_malloc().
[1]: https://fate.ffmpeg.org/report.cgi?slot=x86_64-archlinux-gcc-ubsan&time=20240226182430
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The AAC decoders share no common code with the AAC encoder,
so they are not restricted to using the same structures.
This implies that one can use different structs for each
component and remove elements not used by the decoders/
the encoder. This leads to quite sizeable savings:
sizeof(ChannelElement) for the encoder went down to 134432B
here from 547552B; for the decoder it went down to 512800B.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is decoder-only; furthermore, there is already
an AACContext in use by libfdk-aacenc.
Also make aacdec.h provide the typedef for AACContext;
up until now, this has been done by sbr.h.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Common symbols are not part of ISO-C and therefore not used
by FFmpeg at all. Yet linker warnings to ensure it stays
that way are nevertheless wrong, because the existence of
common symbols does not imply that there is a bug in our code.
More precisely, Clang's ASAN implementation uses a common symbol
___asan_globals_registered when used on Elf targets with
the -fsanitize-address-globals-dead-stripping option;
said option is the default since Clang 17 [1].
This leads to 1883 warnings about ___asan_globals_registered
when linking here.
(Even without that option there were warnings like
_ZN14__interception10real_vforkE being overridden.)
Said warning is also unnecessary: The proper way to ensure
that our code is free of common symbols is to let the compiler
enforce this. But this is already the default since GCC 10
and Clang 11, so there is no risk of introducing our own
common symbols.
[1]: https://reviews.llvm.org/D152604
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Export each tile as its own stream, and the grid information as a Stream Group
of type TILE_GRID.
This also enables exporting other stream items like thumbnails, which may be
present in non tiled HEIF images too. For those, the primary stream will be
tagged with the default disposition.
Based on a patch by Swaraj Hota
Signed-off-by: James Almer <jamrial@gmail.com>
Previously, the following syntax elements were not read in the case
sps_num_subpics_minus is 0:
* sps_subpic_id_len_minus1
* sps_subpic_id_mapping_explicitly_signalled_flag
* sps_subpic_id_mapping_present_flag
* sps_subpic_id[i]
This was causing failures to decode bitstreams, for example the DVB's
"VVC HDR UHDTV1 OpenGOP 3840x2160 50fps HLG10 PiP" V&V bitstream.
Patch fixes this by moving the reads for these syntax elements out a
scope.
Signed-off-by: Frank Plowman <post@frankplowman.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The spec says "the value of sps_num_subpics_minus1 shall be in the
range of 0 to MaxSlicesPerAu − 1, inclusive."
Signed-off-by: Frank Plowman <post@frankplowman.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The SEI message read/write functions are called
via function pointers where the SEI message-specific
context is passed as void*. But the actual function
definitions use a pointer to their proper context
in place of void*, making the calls undefined behaviour.
Clang UBSan 17 warns about this.
This commit fixes this by adding wrapper functions
(created via macros) that have the right type that
call the actual functions. This reduced the number of failing
FATE tests with UBSan from 164 to 85 here.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Previously to support dynamic reconfigurations of the matrix string (e.g. 0m),
the rdiv values would always be cleared to 0.f, causing the rdiv to be
recalculated based on the new filter. This however had the side effect of
always ignoring user specified rdiv values.
Instead float user_rdiv[0] is added to ConvolutionContext which will store the
user specified rdiv values. Then the original rdiv array will store either the
user_rdiv or the automatically calculated 1/sum.
This fixes trac ticket #10294, #10867.
Signed-off-by: Stone Chen <chen.stonechen@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
av_get_sample/pix_fmt() return their respective enums
and are therefore not of the type int (*)(const char*),
yet they are called as-if they were of this type.
This works in practice, but is actually undefined behaviour.
With Clang 17 UBSan these violations are flagged, affecting lots
of tests. The number of failing tests went down from 3363 to 164
here with this patch.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The calls to the sei_decoded_picture_hash read and write functions
are performed with four pointer arguments; just because one
of them is unused by the callees does not mean that they
can be omitted: This is undefined behaviour.
(This was not recognized because the SEI_MESSAGE_RW macro
contains casts.)
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Jpeg2000 decoder is decoding in native endian, so let's use the same workaround
as in fate-mxf-probe-applehdr10.
Fixes ticket #10868.
Signed-off-by: Marton Balint <cus@passwd.hu>
This is the proper poll mode for waiting for an incoming connection according
to the SRT API docs.
Fixes ticket #9142.
Signed-off-by: Marton Balint <cus@passwd.hu>
For IBC, we'll utilize the check_available function.
However, neither MVP nor merge mode need to check the motion estimation region.
Let's rename it to avoid confusion.
