postProcess in postprocess_template.c copies a PPContext
to the stack, works with this copy and then copies
it back again. Said local copy uses a hardcoded alignment
of eight, although PPContext has alignment 32 since
cbe27006ce
(this commit was in anticipation of AVX2 code that never landed).
This leads to misalignment in the filter-(pp|pp1|pp2|pp3|qp)
FATE-tests which UBSan complains about. So avoid the local copy.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
postprocess.c currently has C, MMX, MMXEXT, 3DNow as well as
SSE2 versions of its internal functions. But given that only
ancient 32-bit x86 CPUs don't support SSE2, the MMX, MMXEXT
and 3DNow versions are obsolete and are therefore removed by
this commit. This saves about 56KB here.
(The SSE2 version in particular is not really complete,
so that it often falls back to MMXEXT (which means that
there were some identical (apart from the name) MMXEXT
and SSE2 functions; this duplication no longer exists
with this commit.)
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The input data is multiplied by `s->offset` to get normalized output.
`s->target_tp` and `true_peak` is not in dB,
so `s->offset` should be calculated by division instead of subtraction.
Signed-off-by: Rui Zhu <real.zhurui@gmail.com>
Should fix fate failures on Windowx x86 targets, where long is 32 bits.
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: James Almer <jamrial@gmail.com>
The amount of lines printed is too high for the verbose level, and the debug
level is a better fit for their content.
Signed-off-by: James Almer <jamrial@gmail.com>
Some formats like FLV can dynamically add streams during packet reading.
FFprobe does check for this and reallocates the global stream info, but does
not reallocate InputFrame's streams and decoders when this happens, which,
as a result, could have caused flushing to occur on an out of bounds stream
index, since the flush loop iterates over fmt_ctx's nb_streams, and not
ifile's, despite using ifile's streams.
This fixes an out of bounds read and segfult.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Since e6afa61be9, no components in
libavcodec enable CONFIG_MDCT. This fixes building "make testprogs".
Signed-off-by: Martin Storsjö <martin@martin.st>
Add skip_frame support to qsvenc. Use per-frame metadata
"qsv_skip_frame" to control it. skip_frame option defines the behavior
of qsv_skip_frame.
no_skip: Frame skipping is disabled.
insert_dummy: Encoder inserts into bitstream frame where all macroblocks
are encoded as skipped.
insert_nothing: Similar to insert_dummy, but encoder inserts nothing.
The skipped frames are still used in brc. For example, gop still include
skipped frames, and the frames after skipped frames will be larger in
size.
brc_only: skip_frame metadata indicates the number of missed frames
before the current frame.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Without this change, MSDK/VPL always defaults the HEVC tier to MAIN if the -level is specified.
Also, according to the HEVC specs, only level >= 4 can support High Tier.
Signed-off-by: nyanmisaka <nst799610810@gmail.com>
This e.g. allows compilers to bake the offset implied
by using ff_vc1_b_field_mvpred_scales[3] into the
general offset; for certain arches this is also necessary
in order to avoid building suboptimal code.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is the only encoder supporting quarter samples.
This also allows to remove the qpeldsp dependency from
mpegvideo_enc.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The MPEG-4 decoder is the only decoder based upon H.263 that
supports quarterpel motion vectors.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The only thing from the H.263 decoder that is reachable
by the VC-1 decoder is ff_h263_decode_init(); but it does
not even use all of it; e.g. h263dsp is unused and so are
the VLCs initialized in ff_h263_decode_init() (they amount
to about 77KB which are now no longer touched).
Notice that one could also call ff_idctdsp_init()
directly instead of ff_mpv_idct_init(); one could even
do so in ff_vc1_init_common().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Decoders that might use quarter pixel motion estimation
(namely MPEG-4 as well as the VC-1 family) currently
use MpegEncContext.me.qpel_(put|avg) as scratch space
for pointers to arrays of function pointers.
(MotionEstContext contains such pointers as it supports
quarter pixel motion estimation.) The MotionEstContext
is unused apart from this for the decoding part of
mpegvideo.
Using the context at all is for decoding is actually
unnecessary and easily avoided: All codecs with
quarter pixels set me.qpel_avg to qdsp.avg_qpel_pixels_tab,
so one can just unconditionally use this in ff_mpv_reconstruct_mb().
MPEG-4 sets qpel_put to qdsp.put_qpel_pixels_tab
or to qdsp.put_no_rnd_qpel_pixels_tab based upon
whether the current frame is a b-frame with no_rounding
or not, while the VC-1-based decoders set it to
qdsp.put_qpel_pixels_tab unconditionally. Given
that no_rounding is always zero for VC-1, using
the same check for VC-1 as well as for MPEG-4 would work.
Since ff_mpv_reconstruct_mb() already has exactly
the right check (for hpeldsp), it can simply be reused.
(This change will result in ff_mpv_motion() receiving
a pointer to an array of NULL function pointers instead
of a NULL pointer for codecs without qpeldsp (like MPEG-1/2).
It doesn't matter.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
vc1_decode_skip_blocks() is only called if the current picture
is a P frame. So setting pict_type to AV_PICTURE_TYPE_P
is redundant; removing it makes pict_type read-only in vc1_block.c
(as it should be).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The only msmpeg4 code that is ever executed by the VC-1 based
decoders is ff_msmpeg4_decode_init() and what is directly
reachable from it. This is:
a) A call to av_image_check_size(), then ff_h263_decode_init(),
b) followed by setting [yc]_dc_scale_table and initializing
scantable/permutations.
c) Afterwards, some static tables are initialized.
d) Finally, slice_height is set.
The replacement for ff_msmpeg4_decode_init() performs a)
just like now; it also sets [yc]_dc_scale_table,
but it only initializes inter_scantable and intra_scantable
and not permutated_intra_[hv]_scantable: The latter are only
used inside decode_mb callbacks which are only called
in ff_h263_decode_frame() which is unused for VC-1.*
The static tables initialized in c) are not used at all by
VC-1 (the ones that are used have been factored out in
previous commits); this avoids touching 327KiB of .bss.
slice_height is also not used by the VC-1 decoder (setting
it in ff_msmpeg4_decode_init() is probably redundant after
b34397b4cd).
*: It follows from this that the VC-1 decoder is not really
based upon the H.263 decoder either; changing this will
be done in a future commit.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is in preparation for splitting VC-1 from msmpeg4.
(msmpeg4data.c was originally intended to be just this;
9488b966c7 changed it).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is done since 16af29a7a6
(and is actually unnecessary, because the tables initialized
in ff_msmpeg4_decode_init() are only ever used in vc1_block.c
which is only entered after a call to ff_msmpeg4_decode_init())
in a very ugly manner; said manner had the byproduct of
involving lots of unnecessary allocations and even opening
and closing a hwaccel in case one is used.
This commit achieves the aim of 16af29a7a6
by initializing the VLCs used by VC-1 in ff_vc1_init_common().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
