Martin Storsjö
5e33e7bdac
ffmpeg: Use av_pkt_dump_log2
...
This makes dumped packet timestamps proper for streams with
timebases other than AV_TIME_BASE.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2011-03-02 11:29:38 +01:00
Martin Storsjö
863c471638
libavformat: Add av_pkt_dump{, _log}2, taking an AVStream parameter
...
This removes a fixme issue, by allowing the av_pkt_dump functions
to use the correct time base.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2011-03-02 11:29:38 +01:00
Martin Storsjö
e360ada2d1
aviobuf: Write new data at s->buf_end in fill_buffer
...
In most cases, s->buf_ptr will be equal to s->buf_end when
fill_buffer is called, but this may not always be the case, if
we're seeking forward by reading (permitted by the short seek
threshold).
If fill_buffer is writing to s->buf_ptr instead of s->buf_end (when
they aren't equal and s->buf_ptr is ahead of s->buffer), the data
between s->buf_ptr and s->buf_end is overwritten, leading to
inconsistent buffer content. This could return incorrect data if
later seeking back into the area before the current s->buf_ptr.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2011-03-02 11:16:17 +01:00
Baptiste Coudurier
06ed4873e6
movenc: use correct tag for dvcpro hd
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-02 00:23:08 +00:00
Baptiste Coudurier
99bbc781e9
dnxhd: allow encoding with Avid Nitris compatibility.
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-01 23:55:55 +00:00
Baptiste Coudurier
fffdee89cc
movenc: fix tkhd height for imx
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-01 23:45:03 +00:00
Anton Khirnov
0300db8ad7
avio: deprecate url_fskip
...
avio_seek should be used instead
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-03-01 12:27:08 -05:00
Anton Khirnov
e356fc57a2
lavf: replace all uses of url_fskip with avio_seek
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-03-01 12:22:16 -05:00
Anton Khirnov
6b4aa5dac8
avio: avio_ prefix for url_fseek
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-03-01 12:12:33 -05:00
Alexander Strange
76d8846c4e
huffyuv: Add multithreading support
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-03-01 11:39:25 -05:00
Alexander Strange
ad9791e12b
pthreads: Fix bug introduced with thread_safe_callbacks
...
For intra codecs, ff_thread_finish_setup() is called before decoding starts
automatically. However, get_buffer can only be used before it's called, so
adding this requirement broke frame threading for them. Fixed by moving the
call until after get_buffer is finished.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-03-01 11:39:12 -05:00
Mans Rullgard
00ba041cb3
Use --sysroot flag for clang
...
Although not documented, clang does support the --sysroot flag, and it
does the right thing. Use this flag intead of -isysroot which only
applies to header file searches, not the linker.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-28 02:55:50 +00:00
Mans Rullgard
0b32da90f8
ARM: VP8: fix build on systems with global symbol prefix
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-27 13:53:26 +00:00
Mans Rullgard
8b454c352f
ARM: fix vp8 neon with pic enabled
...
The assembler emits literal pools too far from the load instructions,
so we must do it explicitly at a suitable location.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-27 13:53:21 +00:00
Reimar Döffinger
52b3cc6047
configure: document FATE_SAMPLES env var in --help text
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-26 12:52:13 +00:00
Mans Rullgard
aa3805a486
fate: get samples location from env var if not explicitly set
...
Use the FATE_SAMPLES environment variable if samples location
is not set with the --samples configure option or on the make
command line.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-26 11:51:55 +00:00
Ronald S. Bultje
13ff92d197
movenc: remove uses of deprecated API.
...
Replace put_tag() with ffio_wfourcc() and ByteIOContext with AVIOContext.
2011-02-25 17:41:00 -05:00
Maksym Veremeyenko
d184c86cd3
store pasp atom for all types of quicktime movie
...
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2011-02-25 22:31:16 +01:00
Maksym Veremeyenko
77d207cbe6
reindent after tapt patch
...
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2011-02-25 22:31:16 +01:00
Maksym Veremeyenko
ea1afa124c
use tapt atom for sample aspect ratio
...
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2011-02-25 22:31:16 +01:00
Peter Ross
e211e255aa
bink: prevent overflows within binkidct by using int-sized intermediate array
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-25 15:24:35 -05:00
Peter Ross
588a3ffd96
bink: decode audio track identifiers into AVStream.id
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-25 15:24:35 -05:00
Peter Ross
ccfcddb3f2
Bink version 'b' audio decoder
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-25 15:24:35 -05:00
Peter Ross
8a8c283edd
binkaudio: simplify frame_len_bits and frame_len calculation
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-25 15:24:35 -05:00
Peter Ross
a304def1dc
binkaudio: remove unnecessary loop
...
decode_init sets bands[0] == 2, so this loop always sets the band table
index (k) to zero.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-25 15:24:35 -05:00
Peter Ross
582ac86d19
binkaudio: perform band table scaling in decode_init
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-25 15:24:35 -05:00
Peter Ross
f0ca29eb5f
bink: set audio stream codec_tag such that binkaudio decoder can identify bitstream version
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-25 15:24:35 -05:00
Mans Rullgard
8997bb8807
bink: use LOCAL_ALIGNED for aligned stack data
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-25 19:50:14 +00:00
Kyle
04973f8082
dxva2: define required feature selection macros
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-25 19:48:20 +00:00
Dave Yeo
cc4e9d2a24
OS/2: lxlite should use stdout
...
This causes lxlite to use stdout instead of vioXXX
functions. This improves fate and build logs readability.
Affects OS/2 only.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-25 19:48:19 +00:00
Anton Khirnov
61840b4360
avio: deprecate put_tag
...
it's not used internally anymore and shouldn't be public.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-25 14:38:57 -05:00
Anton Khirnov
bbc413f943
lavf: replace remaining uses of put_tag with avio_write
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-25 14:38:56 -05:00
Anton Khirnov
99f42c27ab
avienc: replace &tag[0] with tag.
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-25 14:38:55 -05:00
Anton Khirnov
0abdb29317
lavf: use a new ffio_wfourcc macro instead of put_tag() where possible
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-25 14:38:22 -05:00
Anssi Hannula
7e06e0ede3
dca: use EXT_AUDIO_ID field to determine core extensions
...
This avoids the core substream extensions scan when the EXT_AUDIO_ID
field indicates no extensions or only unsupported extensions. The scan
is done only if the value of EXT_AUDIO_ID is unknown or indicates a
present XCh extension which we can decode.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-24 21:22:37 +00:00
Justin Ruggles
1108f8998c
vmdaudio: output 8-bit audio as AV_SAMPLE_FMT_U8.
...
There is no need to expand to 16-bits. Just use memcpy() to copy the raw data.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:52:51 -05:00
Justin Ruggles
2ec7862db8
vmdaudio: remove unnecessary fields from VmdAudioContext and use the corresponding AVCodecContext fields instead.
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:52:12 -05:00
Justin Ruggles
1e86d685e0
vmdaudio: add out_bps to VmdAudioContext and use it to replace hard-coded sample size.
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:51:44 -05:00
Justin Ruggles
1574eff3d2
vmdaudio: simplify vmdaudio_decode_frame() by handling block_type first, then making a single call to vmdaudio_loadsound().
...
This also adds output buffer size checks for AUDIO and SILENCE block types.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:51:12 -05:00
Justin Ruggles
ba9516cca8
cosmetics: reindent after previous commit
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:49:59 -05:00
Justin Ruggles
762b386e4a
vmdaudio: move all silence chunk handling to vmdaudio_loadsound().
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:49:58 -05:00
Justin Ruggles
8e9027d266
cosmetics: remove debugging cruft
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:49:56 -05:00
Justin Ruggles
868f2f4d90
cosmetics: reindent after previous commit
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:48:04 -05:00
Justin Ruggles
2d213695fc
vmdaudio: simplify buffer pointer and header size handling.
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:12:39 -05:00
Justin Ruggles
7a4fb3fd93
vmdaudio: set *data_size to zero when skipping small packets and add a warning log message.
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:11:36 -05:00
Justin Ruggles
22f893e1c9
vmdaudio: validate block type
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:10:12 -05:00
Justin Ruggles
dd1af5136f
vmdaudio: use macros and a local variable for block type.
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:08:31 -05:00
Justin Ruggles
6989cb2dae
vmdaudio: correct the silent chunk count in the first block.
...
This fixes A/V sync with several samples, notably:
http://samples.mplayerhq.hu/game-formats/sierra-vmd/swat_*.vmd
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:06:33 -05:00
Justin Ruggles
9b73f78600
vmdaudio: output audio samples for standalone silent blocks.
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:04:51 -05:00
Justin Ruggles
1328d43313
vmdaudio: remove duplicated code by merging mono and stereo decoding.
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-02-23 21:02:19 -05:00