instead of an ad-hoc function to search for start codes in order to
remove code duplication and to improve performance.
Improved performance of finding startcodes from 52606 decicycles to
9543 decicycles based upon 262144 runs for a 1 Mb/s MPEG4 video.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In such a duplication the previous gets overwritten and leaks
Fixes: memleak
Fixes: 12510/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_PGSSUB_fuzzer-5694439226343424
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_qpel_h_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 2%(2.39x to 2.44x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_qpel_bi_h_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 2.1%(2.34x to 2.39x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_epel_bi_hv_8 with mmi in the case width=4/8/12/16/24/32.
This optimization improved HEVC decoding performance 1.7%(2.30x to 2.34x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_qpel_uni_hv_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 2.7%(2.24x to 2.30x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
No speed difference, or slightly faster (the difference is too small so it may be noise
that this appears faster)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
We assume that if the compressed size is bigger than if each byte is encoded in a single raw packet
that the data is invalid.
Fixes: Out of memory
Fixes: 12208/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RASC_fuzzer-5648916473708544
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: Timeout
Fixes: 12192/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RSCC_fuzzer-6279038004363264
Before: clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RSCC_fuzzer-6279038004363264 in 15423 ms
After: clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RSCC_fuzzer-6279038004363264 in 190 ms
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array access
Fixes: 12447/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HYMT_fuzzer-5201623956062208
Fixes: 12458/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HYMT_fuzzer-5705567736168448
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The addition is moved up into the context where the variable is unsigned avoiding
the undefined behavior
Fixes: runtime error: signed integer overflow: 2147481972 + 4096 cannot be represented in type 'int'
Fixes: 12444/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ILBC_fuzzer-5755706244857856
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When making a new P-frame when B-frames are present the previous P-frame
is normally in the DPB because it will be referred to by subsequent
B-frames. However, this is not true if there are no B-frames, or in edge
cases where a GOP ends with two P-frames. Fix this by adding the direct
ref pics to the RPS explicitly.
Fixes#7699.
Tested-by: Ullysses A Eoff <ullysses.a.eoff@intel.com>
The VP3/4/5/6 reference decoders all use three IDCT versions: one for the
DC-only case, another for blocks with more than 10 coefficients, and an
optimised one for blocks with up to 10 AC coefficents. VP6 relies on the
sparse 10 coefficient version, and without it, IDCT drift occurs.
Fixes: https://trac.ffmpeg.org/ticket/1282
Signed-off-by: Peter Ross <pross@xvid.org>
QVBR mode is to use the variable bitrate control algorithm
with constant quality.
mfxExtCodingOption3 should be supported to enable QVBR mode.
It is neccesary to specify a max_rate for QVBR, else it may be ICQ mode.
Example usage: ffmpeg -hwaccel qsv -c:v h264_qsv -i input.mp4 -c:v
h264_qsv -global_quality 25 -maxrate 2M test_qvbr.mp4 -v verbose
Clip QVBR quality range to be [0, 51] as Mark's commments.
It is similar to qp range of CQP but possibly should be updated when VP8/VP9
encoding can be supported.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Zhong Li <zhong.li@intel.com>
This attaches the logic of picking the mode of for the next picture to
the output, which simplifies some choices by removing the concept of
the picture for which input is not yet available. At the same time,
we allow more complex reference structures and track more reference
metadata (particularly the contents of the DPB) for use in the
codec-specific code.
It also adds flags to explicitly track the available features of the
different codecs. The new structure also allows open-GOP support, so
that is now available for codecs which can do it.
Now memcpy can be avoided for NAL units containing escapes, too.
Particularly improves performance for files with hardcoded black bars.
For such a file, time spent in cbs_h2645_split_fragment went down from
369410 decicycles to 327677 decicycles. (It were 379114 decicycles when
every NAL unit was copied.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@googlemail.com>
This is in preparation for a patch for cbs_h2645. Now the packet's
rbsp_buffer can be owned by an AVBuffer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@googlemail.com>
Fix ticket #7663
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Optimize put_hevc_qpel_bi_hv_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 11.4%(2.01x to 2.24x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_qpel_hv_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 11%(1.81x to 2.01x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The compiled libavcodec/tests/codec_desc was left out of that dir's
.gitignore when the test was added, so it shows up in 'git status'
as an untracked file if it's been built.
Signed-off-by: FeRD (Frank Dana) <ferdnyc@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
if 0 is encountered in the LUT then decompress() will continue to output 0 bytes but never read more data.
Without a specification it is impossible to say if this is invalid or a feature.
None of the valid prosumer files tested cause a 0 to be read, so it is likely
not a intended feature.
Fixes: Timeout
Fixes: 11266/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_PROSUMER_fuzzer-5681827423977472
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
