A new mode, selected by filter option, to aid in analysis of HDCD
encoded audio. In this mode the audio is replaced by a solid tone and
the amplitude is adjusted to signal some specified aspect of the process.
The output file can be loaded in an audio editor alongside the original,
where the user can see where different features or states are present.
Signed-off-by: Burt P <pburt0@gmail.com>
This will be used to allow writing file sequences using the tee output onto
multiple places in parallel
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The Doxygen command is generated from the list of installed headers,
which may change per configuration (e.g. `--enable-gpl` results in
libpostproc to be built and installed).
There is actually a need for the origin and end point not to be defined.
We can not automatically insert them with the y value of the first and
last point as it will influence the curves in a wrong way.
Fixes#5397
Signed-off-by: Steven Liu <liuqi@gosun.com>
Reviewed-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'd78fd2fa21cde28465e40dd0be4446b1387d22a6':
Add MagicYUV decoder
Changes observed from Libav:
- many cosmetics (function renames/move, spacing, line breaks)
- MagicYUVContext.slices_size is now unsigned
- use of pixdesc (include fixed in FFmpeg)
- mention of "Lossless" in the long name dropped (also removed from
general.texi in FFmpeg)
- addition of the FF_CODEC_CAP_INIT_THREADSAFE caps
- use of qsort() instead of AV_QSORT() (NOT MERGED)
- use of AVCodecContext.{width,height} instead of AVCodecContext.coded_{width,height} (NOT MERGED)
See also 77f9c4b7aa
Merged-by: Clément Bœsch <u@pkh.me>
support split hls segment at duration set by hls_time
Signed-off-by: LiuQi <liuqi@gosun.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is an - once again - updated patch, that uses avio_write instead
of avio_puts to stream clean text output without null characters. Works
now for me as intended.
Changes metadata filter to accept general urls as file argument without
breaking former behaviour. As a byproduct, it also allows for writing to
file "-" if specified as "file:-".
Example:
ffmpeg -i test.wav -filter_complex "silencedetect=n=-40dB:d=0.1,ametadata=mode=print:file='pipe\:4'" -f null
Signed-off-by: Sami Hult <sami.hult@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The new HDCD filter really does nothing to show that it is working or
that HDCD control information was even detected in the stream. This
patch collects information about the decode, like which features were
used, and reports it to the user at the end.
Also,
* Fixes low-level gain adjustment
* Updates the documentation
Signed-off-by: Burt P <pburt0@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The default value of -1 indicates that ffmpeg should determine the channel
mapping automatically, which was the behavior before this commit.
Unless the -mapping_family argument is provided, behavior is unchanged.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch also makes BlackMagic drivers v10.6.1 a hard requirement.
Reviewed-by: Deti Fliegl <deti@fliegl.de>
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit 'e47b8bbf0b54599d44b9330eb4d68cdde4f6d298':
avcodec: Bump micro version after changing public JPEG 2000 defines
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'db7968bff4851c2be79b15b2cb2ae747424d2fca':
avio: Allow custom IO users to get labels for the output bytestream
Merged-by: Matthieu Bouron <matthieu.bouron@stupeflix.com>
* commit '0c4468dc185fa8b9e7d6add914595c5e928b24fd':
stereo3d: Add API to get name from value or value from name
Merged-by: Clément Bœsch <clement@stupeflix.com>
Currently it's exported as AVFrame.pkt_pts, which is also the only use
for that field. The reason it is done like this is that lavc used to
export various codec-specific "timing" information in AVFrame.pts, which
is not done anymore.
Since it is confusing to the callers to have a separate field which is
used only for decoder timestamps and nothing else, deprecate pkt_pts and
use just AVFrame.pts everywhere.
We haven't had a stable release since the packet_gap addition, so probably it
is worth reworking the option to something that makes more sense to the end
user. Also add burst_bits option to specify maximum length of bit bursts.
Signed-off-by: Marton Balint <cus@passwd.hu>
This commit enables sending UDP packets in a background thread with specified delay.
When sending packets without a delay some devices with small RX buffer
( MAG200 STB, for example) will drop tail packets in bursts causing
decoding errors.
To use it specify "fifo_size" with "packet_gap" .
The output url will looks like udp://xxx:yyy?fifo_size=<output fifo
size>&packet_gap=<delay in usecs>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This allows callers with avio write callbacks to get the bytestream
positions that correspond to keyframes, suitable for live streaming.
In the simplest form, a caller could expect that a header is written
to the bytestream during the avformat_write_header, and the data
output to the avio context during e.g. av_write_frame corresponds
exactly to the current packet passed in.
When combined with av_interleaved_write_frame, and with muxers that
do buffering (most muxers that do some sort of fragmenting or
clustering), the mapping from input data to bytestream positions
is nontrivial.
This allows callers to get directly information about what part
of the bytestream is what, without having to resort to assumptions
about the muxer behaviour.
One keyframe/fragment/block can still be split into multiple (if
they are larger than the aviocontext buffer), which would call
the callback with e.g. AVIO_DATA_MARKER_SYNC_POINT, followed by
AVIO_DATA_MARKER_UNKNOWN for the second time it is called with
the following data.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is impossible to pass "aspect" parameter to encoder from ffmpeg CLI
because option from lavc/options_table.h is eclipsed by option with same
name in ffmpeg_opt.c, which has different meaning (DAR, not SAR).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The new function behaves the same as av_log_format_line, but also forwards
the return value from the underlying snprintf call. This will allow
callers to accurately determine the size requirements for the line buffer.
Signed-off-by: Andreas Weis <github@ghulbus-inc.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Adds per slave option 'onfail' to the tee muxer allowing an output to
fail, so other slave outputs can continue.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Jan Sebechlebsky <sebechlebskyjan@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Until now, the decoding API was restricted to outputting 0 or 1 frames
per input packet. It also enforces a somewhat rigid dataflow in general.
This new API seeks to relax these restrictions by decoupling input and
output. Instead of doing a single call on each decode step, which may
consume the packet and may produce output, the new API requires the user
to send input first, and then ask for output.
For now, there are no codecs supporting this API. The API can work with
codecs using the old API, and most code added here is to make them
interoperate. The reverse is not possible, although for audio it might.
From Libav commit 05f66706d1.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '933dec0e29ec4d2cb83474279a6c52d62fdb7310':
file: Add an option for following a file that is being written
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Add number of input and output frames to possible variables.
Add option eval to reevaluate coordinate expressions during
initialization or for every frame.
* commit '48362ceadeb2eb5286ae94ef7f9542d990ff7ec7':
doc: Update paths to match new examples location
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Add a filter to scan the top lines of video frames for vertical interval
timecode (VITC) information and attach it as metadata keys.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '3e8fd93b6ab219221e17fa2b6243cc72cf2d69dc':
lavf: add a missing bump and APIchanges for the codecpar switch
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Show example which draws text at a random position, and switches positions every 30 seconds
Signed-off-by: Mulvya <mulvya@gmail.com>
Signed-off-by: Lou Logan <lou@lrcd.com>
* commit 'a8068346e48e123f8d3bdf4d64464d81e53e5fc7':
lavc: add a variant of av_get_audio_frame_duration working with AVCodecParameters
Fixes from jamrial incorporated.
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '998e1b8f521b73e1ed3a13caaabcf79eb401cf0d':
lavc: add codec parameters API
Fixes added in:
- bit_rate has been made int64_t to match.
- profile and level are properly initialize.
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Using this requires setting the rw_timeout option to make it
terminate, alternatively using the interrupt callback (if used via
the API).
Signed-off-by: Martin Storsjö <martin@martin.st>
If set non-zero, this limits duration of the retry_transfer_wrapper()
loop, thus affecting ffurl_read*(), ffurl_write(). As soon as
one single byte is successfully received/transmitted, the timer
restarts.
This has further changes by Michael Niedermayer and Martin Storsjö.
Signed-off-by: Martin Storsjö <martin@martin.st>
Until now, the decoding API was restricted to outputting 0 or 1 frames
per input packet. It also enforces a somewhat rigid dataflow in general.
This new API seeks to relax these restrictions by decoupling input and
output. Instead of doing a single call on each decode step, which may
consume the packet and may produce output, the new API requires the user
to send input first, and then ask for output.
For now, there are no codecs supporting this API. The API can work with
codecs using the old API, and most code added here is to make them
interoperate. The reverse is not possible, although for audio it might.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Remove achroma filter, as same output can be done with lowpass filter
and multiple components with overlay display.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
For example you can split a file, keeping a continuous timecode between
each segment:
ffmpeg -i src.mov -timecode 10:00:00:00 -vcodec copy -f segment \
-segment_time 2 -reset_timestamps 1 -increment_tc 1 target_%03d.mov
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
This is safer, as a selected demuxer could still mean that it was auto-detected
by a user application
Reviewed-previously-by: Nicolas George <george@nsup.org>
Reviewed-previously-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Check that the required plane pointers and only
those are set up.
Currently does not enforce anything for the palette
pointer of pseudopal formats as I am unsure about the
requirements.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* commit '7b3214d0050613bd347a2e41c9f78ffb766da25e':
lavc: add a field for passing AVHWFramesContext to encoders
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '21f7cd4acd8dc4b4796b55966dd015cb037164d8':
lavfi: add a filter for uploading normal frames to CUDA
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This allows to copy information related to the stream ID from the demuxer
to the muxer, thus allowing for example to retain information related to
synchronous and asynchronous KLV data packets. This information is used
in the muxer when remuxing to distinguish the two kind of packets (if the
information is lacking, data packets are considered synchronous).
The fate reference changes are due to the use of
av_packet_merge_side_data(), which increases the size of the output
packet size, since side data is merged into the packet data.
This API is intended to allow passing around codec parameters without
using full AVCodecContext (which also contains codec options and
encoder/decoder state).
