This fixes building with clang for linux with PIC enabled.
This is cherrypicked from libav commit
8847eeaa14.
Signed-off-by: Martin Storsjö <martin@martin.st>
This adds lots of extra .ifs, but speeds it up by a couple cycles,
by avoiding stalls.
This is cherrypicked from libav commit
b0806088d3.
Signed-off-by: Martin Storsjö <martin@martin.st>
This adds lots of extra .ifs, but speeds it up by a couple cycles,
by avoiding stalls.
This is cherrypicked from libav commit
e18c39005a.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously we first calculated hev, and then negated it.
Since we were able to schedule the negation in the middle
of another calculation, we don't see any gain in all cases.
Before: Cortex A7 A8 A9 A53 A53/AArch64
vp9_loop_filter_v_4_8_neon: 147.0 129.0 115.8 89.0 88.7
vp9_loop_filter_v_8_8_neon: 242.0 198.5 174.7 140.0 136.7
vp9_loop_filter_v_16_8_neon: 500.0 419.5 382.7 293.0 275.7
vp9_loop_filter_v_16_16_neon: 971.2 825.5 731.5 579.0 453.0
After:
vp9_loop_filter_v_4_8_neon: 143.0 127.7 114.8 88.0 87.7
vp9_loop_filter_v_8_8_neon: 241.0 197.2 173.7 140.0 136.7
vp9_loop_filter_v_16_8_neon: 497.0 419.5 379.7 293.0 275.7
vp9_loop_filter_v_16_16_neon: 965.2 818.7 731.4 579.0 452.0
This is cherrypicked from libav commit
e1f9de86f4.
Signed-off-by: Martin Storsjö <martin@martin.st>
This work is sponsored by, and copyright, Google.
Before: Cortex A53
vp9_inv_dct_dct_16x16_sub1_add_neon: 235.3
vp9_inv_dct_dct_32x32_sub1_add_neon: 555.1
After:
vp9_inv_dct_dct_16x16_sub1_add_neon: 180.2
vp9_inv_dct_dct_32x32_sub1_add_neon: 475.3
This is cherrypicked from libav commit
3fcf788fbb.
Signed-off-by: Martin Storsjö <martin@martin.st>
No measured speedup on a Cortex A53, but other cores might benefit.
This is cherrypicked from libav commit
388e0d2515.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fold the field lengths into the macro.
This makes the macro invocations much more readable, when the
lines are shorter.
This also makes it easier to use only half the registers within
the macro.
This is cherrypicked from libav commit
5e0c2158fb.
Signed-off-by: Martin Storsjö <martin@martin.st>
The ld1r is a leftover from the arm version, where this trick is
beneficial on some cores.
Use a single-lane load where we don't need the semantics of ld1r.
This is cherrypicked from libav commit
ed8d293306.
Signed-off-by: Martin Storsjö <martin@martin.st>
This work is sponsored by, and copyright, Google.
This avoids loading and calculating coefficients that we know will
be zero, and avoids filling the temp buffer with zeros in places
where we know the second pass won't read.
This gives a pretty substantial speedup for the smaller subpartitions.
The code size increases from 14740 bytes to 24292 bytes.
The idct16/32_end macros are moved above the individual functions; the
instructions themselves are unchanged, but since new functions are added
at the same place where the code is moved from, the diff looks rather
messy.
Before:
vp9_inv_dct_dct_16x16_sub1_add_neon: 236.7
vp9_inv_dct_dct_16x16_sub2_add_neon: 1051.0
vp9_inv_dct_dct_16x16_sub4_add_neon: 1051.0
vp9_inv_dct_dct_16x16_sub8_add_neon: 1051.0
vp9_inv_dct_dct_16x16_sub12_add_neon: 1387.4
vp9_inv_dct_dct_16x16_sub16_add_neon: 1387.6
vp9_inv_dct_dct_32x32_sub1_add_neon: 554.1
vp9_inv_dct_dct_32x32_sub2_add_neon: 5198.5
vp9_inv_dct_dct_32x32_sub4_add_neon: 5198.6
vp9_inv_dct_dct_32x32_sub8_add_neon: 5196.3
vp9_inv_dct_dct_32x32_sub12_add_neon: 6183.4
vp9_inv_dct_dct_32x32_sub16_add_neon: 6174.3
vp9_inv_dct_dct_32x32_sub20_add_neon: 7151.4
vp9_inv_dct_dct_32x32_sub24_add_neon: 7145.3
vp9_inv_dct_dct_32x32_sub28_add_neon: 8119.3
vp9_inv_dct_dct_32x32_sub32_add_neon: 8118.7
After:
vp9_inv_dct_dct_16x16_sub1_add_neon: 236.7
vp9_inv_dct_dct_16x16_sub2_add_neon: 640.8
vp9_inv_dct_dct_16x16_sub4_add_neon: 639.0
vp9_inv_dct_dct_16x16_sub8_add_neon: 842.0
vp9_inv_dct_dct_16x16_sub12_add_neon: 1388.3
vp9_inv_dct_dct_16x16_sub16_add_neon: 1389.3
vp9_inv_dct_dct_32x32_sub1_add_neon: 554.1
vp9_inv_dct_dct_32x32_sub2_add_neon: 3685.5
vp9_inv_dct_dct_32x32_sub4_add_neon: 3685.1
vp9_inv_dct_dct_32x32_sub8_add_neon: 3684.4
vp9_inv_dct_dct_32x32_sub12_add_neon: 5312.2
vp9_inv_dct_dct_32x32_sub16_add_neon: 5315.4
vp9_inv_dct_dct_32x32_sub20_add_neon: 7154.9
vp9_inv_dct_dct_32x32_sub24_add_neon: 7154.5
vp9_inv_dct_dct_32x32_sub28_add_neon: 8126.6
vp9_inv_dct_dct_32x32_sub32_add_neon: 8127.2
This is cherrypicked from libav commit
a63da4511d.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows reusing the macro for a separate implementation of the
pass2 function.
This is cherrypicked from libav commit
79d332ebbd.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows reusing the macro for a separate implementation of the
pass2 function.
This is cherrypicked from libav commit
47b3c2c18d.
Signed-off-by: Martin Storsjö <martin@martin.st>
This work is sponsored by, and copyright, Google.
This reduces the code size of libavcodec/aarch64/vp9itxfm_neon.o from
19496 to 14740 bytes.
This gives a small slowdown of a couple of tens of cycles, but makes
it more feasible to add more optimized versions of these transforms.
Before:
vp9_inv_dct_dct_16x16_sub4_add_neon: 1036.7
vp9_inv_dct_dct_16x16_sub16_add_neon: 1372.2
vp9_inv_dct_dct_32x32_sub4_add_neon: 5180.0
vp9_inv_dct_dct_32x32_sub32_add_neon: 8095.7
After:
vp9_inv_dct_dct_16x16_sub4_add_neon: 1051.0
vp9_inv_dct_dct_16x16_sub16_add_neon: 1390.1
vp9_inv_dct_dct_32x32_sub4_add_neon: 5199.9
vp9_inv_dct_dct_32x32_sub32_add_neon: 8125.8
This is cherrypicked from libav commit
115476018d.
Signed-off-by: Martin Storsjö <martin@martin.st>
This work is sponsored by, and copyright, Google.
This reduces the code size of libavcodec/arm/vp9itxfm_neon.o from
15324 to 12388 bytes.
This gives a small slowdown of a couple tens of cycles, up to around
150 cycles for the full case of the largest transform, but makes
it more feasible to add more optimized versions of these transforms.
Before: Cortex A7 A8 A9 A53
vp9_inv_dct_dct_16x16_sub4_add_neon: 2063.4 1516.0 1719.5 1245.1
vp9_inv_dct_dct_16x16_sub16_add_neon: 3279.3 2454.5 2525.2 1982.3
vp9_inv_dct_dct_32x32_sub4_add_neon: 10750.0 7955.4 8525.6 6754.2
vp9_inv_dct_dct_32x32_sub32_add_neon: 18574.0 17108.4 14216.7 12010.2
After:
vp9_inv_dct_dct_16x16_sub4_add_neon: 2060.8 1608.5 1735.7 1262.0
vp9_inv_dct_dct_16x16_sub16_add_neon: 3211.2 2443.5 2546.1 1999.5
vp9_inv_dct_dct_32x32_sub4_add_neon: 10682.0 8043.8 8581.3 6810.1
vp9_inv_dct_dct_32x32_sub32_add_neon: 18522.4 17277.4 14286.7 12087.9
This is cherrypicked from libav commit
0331c3f5e8.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids concatenation, which can't be used if the whole macro
is wrapped within another macro.
This is also arguably more readable.
This is cherrypicked from libav commit
58d87e0f49.
Signed-off-by: Martin Storsjö <martin@martin.st>
The 'sqrt' and 'cbrt' scalers were added in commit
80262d8c86, but their symbolic option values
only made available to the showwaves filter, not showwavespic, despite
the scalers working properly by their numerical option values.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
1. limit to single layer, as there is no current support for setting distortion/quality of multiple layers
2. encoder mode should be kept at default setting (0)
3. remove fixed_alloc parameter from context : seldom if ever used, and no way of properly configuring at the moment
4. add irreversible setting, to allow for lossless encoding. Set to OpenJPEG default (enabled)
5. set numresolution max to 33, which is the maximum number of allowed resolutions according the J2K spec
Signed-off-by: Michael Bradshaw <mjbshaw@google.com>
Make it clear that there is no timing-dependent behavior. In particular,
there is no state in which both input and output are denied, and where
you have to wait for a while yourself to make progress (apparently some
hardware decoders like to do this).
Avoid wording that makes references to time. It shouldn't be mistaken
for some kind of asynchronous API (like POSIX read() can return EAGAIN
if there is no new input yet). It's a state machine, so try to use
appropriate terms.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Merges Libav commit 8a60bba0ae.
Apparently the demuxer outputs the wrong padding for HE-AAC (based on
the raw sample rate, or so). aacdec contains a hack to adjust the muxer
padding accordingly before it's used to trim the decoder output. This
modified the packet side data, which in combination with the old
decoding API would change the packet the user passed to the decoder.
This is clearly not allowed, and it breaks running some gapless fate
tests with "-fflags +keepside" applied (without keepside, the packet
metadata is typically newly allocated, essentially making a copy and not
modifying the user's input packet).
This should probably be fixed in the demuxer (and consequently also the
muxer), but for now only fix the immediate problem.
Regression since 946ed78f5f (2012).
except filter_length == 1
odd filter_length gives worse frequency response,
even when compared with shorter filter_length
also makes build_filter simpler
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
The Chen-Shapiro(CS) test was used to test normality for
Lagged Fibonacci PRNG.
Normality Hypothesis Test:
The null hypothesis formally tests if the population
the sample represents is normally-distributed. For
CS, when the normality hypothesis is True, the
distribution of QH will have a mean close to 1.
Information on CS can be found here:
http://www.stata-journal.com/sjpdf.html?articlenum=st0264http://www.originlab.com/doc/Origin-Help/NormalityTest-Algorithm
Signed-off-by: Thomas Turner <thomastdt@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
