Functionality used before didn't widen the values from limited to
full range. Additionally, now the decoder uses BT.709 where it
should be used according to the video resolution.
Default for not yet set colorimetry is BT.709 due to most observed
HDMV content being HD.
BT.709 coefficients were gathered from the first two parts of BT.709
to BT.2020 conversion guide in ARIB STD-B62 (Pt. 1, Chapter 6.2.2).
They were additionally confirmed by manually calculating values.
Fixes#4637
* commit 'cdb1665f70def544ddab3e3ed3763ef99c8b3873':
aarch64: Make transpose_4x4H do a regular transpose
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '159323897f545e7405fb9db234e0ba123e174376':
intrax8: Add a local BlockDSPContext and initialize it
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '8072345e9f86d88fbc4a15c17cb03f1e4701c9a5':
intrax8: Keep a reference to the GetBitContext reader
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '65f14128c4bcf8fcd9d3ba1e20b7a22057c9cfb0':
intrax8: Use a constant buffer instead of a ScratchpadContext
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit 'eaeba6f241e0de0e797be10f8fda967ef8489e64':
intrax8: Pass the output frame to the decoding function
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '577393321c389ad2973bec6168a8045c94a9e099':
intrax8: Carry over the loopfilter value in ff_intrax8_decode_picture
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '68127e1bf8037a6e0acd6401cc8c5da950e3fa0a':
intrax8: Keep a reference to the context idctdsp
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '65127450add50c3bca307edc0517d2e8382717a0':
intrax8: Make x8_init_block_index not use mpegvideo fields
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit 'a7da517f6a5c472f46f67dd33bb6b95ccc919923':
h264data: Move all data tables from a header to a .c file
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Adds per slave option 'onfail' to the tee muxer allowing an output to
fail, so other slave outputs can continue.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Jan Sebechlebsky <sebechlebskyjan@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
In open_slave failure can happen before bsfs array is initialized,
close_slave must check that bsfs is not NULL before accessing
tee_slave->bsfs[i] element.
Slave muxer expects write_trailer to be called if it's
write_header suceeded (so resources allocated in write_header
are freed). Therefore if failure happens after successfull
write_header call, we must ensure that write_trailer of
that particular slave is called.
Some cleanups are made by Marton Balint.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Jan Sebechlebsky <sebechlebskyjan@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
This commit is a no-op. Ivan Uskov is going to port it for us.
* commit 'e3dfef8e3c85a64dbe6388117303f5819fa3c6a2':
qsvdec_h2645: switch to the new BSF API
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit 'a638e9184d63e57e67901f34afe919fd56fd3ac4':
vf_fade: make sure the slice end is always in the frame
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit 'b298b36fc008ad94a24929fe770c8189d96bcac4':
fate: Only run SRTP test if SRTP code is enabled
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '3ee2ec5ec1e39a438f89302d949c93a1b5d365a2':
unix: Use rw_timeout for setting the connect timeout
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This commit is a no-op.
* commit '136c3438bbdb56a5d2f1f0f486f180641dc6dda0':
tcp: Use rw_timeout for setting the connect/listen timeouts
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Until now, the decoding API was restricted to outputting 0 or 1 frames
per input packet. It also enforces a somewhat rigid dataflow in general.
This new API seeks to relax these restrictions by decoupling input and
output. Instead of doing a single call on each decode step, which may
consume the packet and may produce output, the new API requires the user
to send input first, and then ask for output.
For now, there are no codecs supporting this API. The API can work with
codecs using the old API, and most code added here is to make them
interoperate. The reverse is not possible, although for audio it might.
From Libav commit 05f66706d1.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Fixes out of array read
Fixes: mozilla bug 1266129
Found-by: Tyson Smith
Tested-by: Tyson Smith
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The yasm/nasm preprocessor only checks the first token, which means that
parameters such as `dword [rax]` are treated as identifiers, which is
generally not what we want.
