Adding the support to build FFMPEG with HW accelerated decode(nvdec) and
encode on aarch64 architecture.
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
support dvcC/dvcC box from spec Dolby Vision Streams Within the
ISO Base MediaFile Format Version 2.1.2
(https://www.dolby.com/in/en/technologies/dolby-vision/dolby-vision\
-bitstreams-within-the-iso-base-media-file-format-v2.1.2.pdf)
export the DOVI information to sidedata.
Signed-off-by: vacingfang <vacingfang@tencent.com>
support DOVI Video Stream Descriptor from Dolby Vision Streams
Within the MPEG-2 Transport Stream Format V1.2
From the spec: https://www.dolby.com/us/en/technologies/\
dolby-vision/dolby-vision-bitstreams-in-mpeg-2-transport-\
stream-multiplex-v1.2.pdf.
export the DOVI information with sidedata.
Signed-off-by: vacingfang <vacingfang@tencent.com>
This patch adds support to skip the CRG marker.
The CRG marker, is an informational marker.
Allows samples such as p0_03.j2k to be decoded.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array read
Fixes: 20796/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_IFF_ILBM_fuzzer-5111364702175232.fuzz
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
We derive the destination buffer stride from the input stride,
which meant if the image was flipped with a negative stride,
we'd be FFALIGNING a negative number which ends up being huge,
thus making the Vulkan buffer allocation fail and the whole
image transfer fail.
Only found out about this as OpenGL compositors can copy an entire
image with a single call if its flipped, rather than iterate over
each line.
Reindentation, removal of { } if they contain only one statement
and moving the return statement to a line of its own in situations
like "if (ret < 0) return ret;". Moreover, several overlong lines
were made shorter and a camelCase variable received a name in line
with our naming conventions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, the Matroska muxer would mark a track as default if it had
the disposition AV_DISPOSITION_DEFAULT or if there was no track with
AV_DISPOSITION_DEFAULT set; in the latter case even more than one track
of a kind (audio, video, subtitles) was marked as default which is not
sensible.
This commit changes the logic used to mark tracks as default. There are
now three modes for this:
a) In the "infer" mode the first track of every type (audio, video,
subtitles) with default disposition set will be marked as default; if
there is no such track (for a given type), then the first track of this
type (if existing) will be marked as default. This behaviour is inspired
by mkvmerge. It ensures that the default flags will be set in a sensible
way even if the input comes from containers that lack the concept of
default flags. This mode is the default mode.
b) The "infer_no_subs" mode is similar to the "infer" mode; the
difference is that if no subtitle track with default disposition exists,
no subtitle track will be marked as default at all.
c) The "passthrough" mode: Here the track will be marked as default if
and only the corresponding input stream had disposition default.
This fixes ticket #8173 (the passthrough mode is ideal for this) as
well as ticket #8416 (the "infer_no_subs" mode leads to the desired
output).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
At the end of encoding, the FLAC encoder sends a packet whose side data
contains updated extradata (e.g. a correct md5 checksum). The Matroska
muxer uses this to update the CodecPrivate.
In doing so, the stream's codecpar was copied. But given that writing
a FLAC CodecPrivate does not modify the used AVCodecParameters at all,
there is no need to do so and this commit changes this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Several EBML Master elements for which a good upper bound of the final
length was available were nevertheless written without giving an
upper bound of the final length to start_ebml_master(), so that their
length fields were eight bytes long. This has been changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Matroska muxer does not write every stream as a Matroska track;
some streams are written as AttachedFile. But should no stream be
written as a Matroska track, the Matroska muxer would nevertheless
write a Tracks element without a TrackEntry. This is against the spec.
This commit changes this and only writes a Tracks if there is a Matroska
track.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
As WebM doesn't support Attachments, the Matroska muxer drops them when
in WebM mode. This happened silently until this commit which adds a
warning for this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
In order to determine whether the current Cluster needs to be closed
because of the limits on clustersize and clustertime,
mkv_write_packet() would first get the size of the current Cluster by
applying avio_tell() on the dynamic buffer holding the current Cluster.
It did this without checking whether there is a dynamic buffer for
writing Clusters open right now.
In this case (which happens when writing the first packet)
avio_tell() returned AVERROR(EINVAL); yet it is not good to rely on
avio_tell() (or actually, avio_seek()) to handle the situation
gracefully.
Fixing this is easy: Only check whether a Cluster needs to be closed
if a Cluster is in fact open.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When creating DASH streams, the TrackNumber is externally prescribed
and not derived from the number of streams in the AVFormatContext, so
if the number of tracks for a file using an explicit TrackNumber was
more than one, the resulting file would be broken (it would be impossible
to tell to which track a Block belongs if different tracks share the
same TrackNumber). So disallow this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Matroska muxer currently only adds CuePoints in three cases:
a) For video keyframes. b) For the first audio frame in a new Cluster if
in DASH-mode. c) For subtitles. This means that ordinary Matroska audio
files won't have any Cues which impedes seeking.
This commit changes this. For every track in a file without video track
it is checked and tracked whether a Cue entry has already been added
for said track for the current Cluster. This is used to add a Cue entry
for each first packet of each track in each Cluster.
Implements #3149.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Matroska file format has practically no limit on the number of
tracks (the current limit is 2^56 - 1); yet because they are encoded in
a variable length format in (Simple)Blocks this muxer has simply imposed
a limit on the number of tracks in order to ensure that they can always
be written on one byte in order to simplify the muxing process.
This commit removes said limit.
Also, zero is an invalid TrackNumber, so disallow this value in the
dash_track_number option.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This commit factors the ability to write ordinary EBML numbers out of
the functions for writing EBML lengths. This is in preparation for
future commits.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
EBML uses variable length integers both for the EBML IDs as well as for
the EBML lengths; Matroska also uses them for the TrackNumber in
(Simple)Blocks and for the lengths of laces when EBML lacing is used.
When encoding EBML lengths, certain encodings have a special meaning,
namely that the element has an unknown length. This is not so when
encoding general EBML variable length integers.
Yet the functions called ebml_num_size() and put_ebml_num() had this
special meaning hardcoded, i.e. they are there to write EBML lengths and
not general EBML numbers. So rename them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Matroska (or actually EBML) uses variable-length numbers where only
seven bits of every byte is usable for the length; the other bits encode
the length of the variable-length number. So in order to find out how
many bytes one needs to encode a given number one can use a loop like
while (num >> 7 * bytes) bytes++; the Matroska muxer effectively did this.
Yet it has a disadvantage: It is impossible for the result of a single
right shift of an unsigned number with most significant bit set to be
zero, because one can only shift by 0..(width - 1). On some
architectures like x64 it is not even possible to do it with undefined
right shifts in which case this leads to an infinite loop.
This can be easily avoided by switching to a loop whose condition is
(num >>= 7). The maximum value the so modified function can return
is 10; any value > 8 is invalid and will now lead to an assert in
put_ebml_num() or in start_ebml_master() (or actually in
put_ebml_size_unknown()).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Use the mime_types of the corresponding AVCodecDescriptor instead of
tables specific to Matroska. The former are generally more encompassing:
They contain every item of the current lists except "text/plain" for
AV_CODEC_ID_TEXT and "binary" for AV_CODEC_ID_BIN_DATA.
The former has been preserved by special-casing it while the latter is
a hack added in c9212abf so that the demuxer (which uses the same tables)
sets the appropriate CodecID for broken files ("binary" is not a correct
mime type at all); using it for the muxer was a mistake. The correct
mime type for AV_CODEC_ID_BIN_DATA is "application/octet-stream" and
this is what one gets from the AVCodecDescriptor.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Found while reviewing a patch fixing a similar issue
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
