Profile can be derived from values codecpar pixel format only with software
formats. For hardware formats, we're forced to parse a frame header to get
the required information.
Signed-off-by: James Almer <jamrial@gmail.com>
Should fix fate failures on Windowx x86 targets, where long is 32 bits.
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: James Almer <jamrial@gmail.com>
The amount of lines printed is too high for the verbose level, and the debug
level is a better fit for their content.
Signed-off-by: James Almer <jamrial@gmail.com>
There are sill many users of these APIs within libav*, so this commit
introduced too many deprecation warnings, making compilation too noisy and
potentially hiding legit warnings.
Once the remaining users are ported, this can be reapplied.
This reverts commit 76d0038579.
The order in which the channels are coded in the bitstream do not always follow
the native, bitmask-based order of channels both signaled by the WAV container
and forced by this same decoder. This is the case with layouts containing an
LFE channel, as it's always coded last.
Fixes ticket #9964.
Signed-off-by: James Almer <jamrial@gmail.com>
Generalize the checks for channels in all positions, and properly support
the three height groups (normal, top, bottom) instead of manually setting
the relevant channels for the latter two after the normal height tags were
parsed.
Signed-off-by: James Almer <jamrial@gmail.com>
If PCE defines channels not covered by those in the standard configurations
then don't try to come up with some made up layout and just return them in the
coded order.
Fixes al08_44.mp4 from the conformance suite, now reporting and decoding all 48
channels instead of 10.
Signed-off-by: James Almer <jamrial@gmail.com>
Set the correct amount of tags in tags_per_config[].
Also, there are no channels that correspond to a side element in this
configuration, so reflect this in the list of known/supported channel layouts.
Signed-off-by: James Almer <jamrial@gmail.com>
A two byte sync word is not enough to ensure we got a real syncframe, nor are
all the range checks we do in the first seven bytes. Do therefore an integrity
check for the sync frame in order to prevent the parser from filling avctx with
bogus information.
Signed-off-by: James Almer <jamrial@gmail.com>
Have it only find frame boundaries. The stream props will then be filled once
we have an assembled frame.
Signed-off-by: James Almer <jamrial@gmail.com>
Code freeing the struct on failure is kept for backwards compatibility, but
should be removed in the next major bump, and the existing lavf user adapted.
Signed-off-by: James Almer <jamrial@gmail.com>
librav1e provides a function to create extradata, so use it instead of
extracting the sequence header OBU from packets.
Signed-off-by: James Almer <jamrial@gmail.com>
Starting with an h264 implementation. Can be extended to support other codecs.
A few caveats:
- OpenGOP streams are currently not supported. The firt packet must be an IDR
frame.
- In some streams, a few frames at the end may not get a reordered PTS when
they reference frames past EOS. The code added to derive timestamps from
previous frames needs to extended.
Addresses ticket #502.
Signed-off-by: James Almer <jamrial@gmail.com>
Don't place it as doxy specific for the order field, and generalize it both to
also cover already defined orders and to not make it seem like the user is
required to handle a layout they don't fully support or understand.
Signed-off-by: James Almer <jamrial@gmail.com>
Use the stream duration as last resort, as an off-by-one result of the
"st->duration / (caf->packets - 1)" calculation can break playback on some
devices.
Also, don't write the sample_rate value propagated by encoders like libopus.
The sample rate of the audio fed to it is irrelevant after being encoded.
Fixes ticket #9930.
Signed-off-by: James Almer <jamrial@gmail.com>
In case new orders are added in the future, existing library users can still
use the layout simply by ignoring everything but the channel count in it, so
make this explicit.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: James Almer <jamrial@gmail.com>
This block was scheduled for removal, which means that no validation would have
taken place after the old API was removed.
It was algo going to mistakenly remove an unrelated bits_per_coded_sample
check.
Signed-off-by: James Almer <jamrial@gmail.com>
It may be NULL, as is the case for D3D11VA_VLD.
Running "ffmpeg -h decoder=h264" on a Windows build
Before:
Decoder h264 [H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10]:
Supported hardware devices: dxva2 (null) d3d11va cuda
After:
Decoder h264 [H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10]:
Supported hardware devices: dxva2 d3d11va cuda
Signed-off-by: James Almer <jamrial@gmail.com>
If it's unsupported or invalid, then there's no point trying to rebuild it
using a value that may have been derived from the same layout to begin with.
Move the checks before the attempts at copying the layout while at it.
Fixes ticket #9908.
Signed-off-by: James Almer <jamrial@gmail.com>
This duration is equal to the longest duration in all track's tkhd atoms, which
may be comprised of the sum of all edit lists in each track. Empty edit lists
in tracks represent start_time, and the actual media duration is stored in the
mdhd atom.
This change lets the generic demux code derive the longest track duration taken
from mdhd atoms, so the correct duration and start_time combination will be
reported.
Should fix ticket #9775.
Reviewed-by: zhilizhao(赵志立) <quinkblack@foxmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Instead of the potentially adjusted ones. Otherwise, if config_props() is
called again and if using force_original_aspect_ratio, the already adjusted
values could be altered again.
Example command line
scale=size=1920x1000:force_original_aspect_ratio=decrease:force_divisible_by=2
user value 1920x1000 -> 1920x798 on init_dict() -> 1918x798 on frame
change when eval_mode == EVAL_MODE_INIT, which after e645a1ddb9 could be at the
very first frame.
Signed-off-by: James Almer <jamrial@gmail.com>
There's no warranty that vpx_codec_encode() will generate a list with the same
amount of packets for both the yuv planes encoder and the alpha plane encoder,
so queueing packets based on what the main encoder returns will fail when the
amount of packets in both lists differ.
Queue all data packets for every vpx_codec_encode() call from both encoders
before attempting to assemble output AVPackets out of them.
Fixes ticket #9884
Reviewed-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Don't silently replace it with the default layout for the amount of channels
from the requested layout.
Should fix ticket #9869
Signed-off-by: James Almer <jamrial@gmail.com>
Include two values for it, a default one that sets/keeps the current behavior,
where the frame event generated by the primary input will have a timestamp
equal or higher than frames in secondary input, plus a new one where the
secondary input frame will be that with the absolute closest timestamp to that
of the frame event one.
Addresses ticket #9689, where the new optional behavior produces better frame
syncronization.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: James Almer <jamrial@gmail.com>
It's not modified, so we can simply use a const pointer to it.
Also check the return value of the other copy in the function while at it.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes outputting silence on the second channel when decoding Parametic Stereo
HE-AAC.
Closes ticekt #3361.
Signed-off-by: James Almer <jamrial@gmail.com>
The decoder is meant to use it as a fallback if the value in extradata is
invalid.
Regression since d199099be.
Signed-off-by: James Almer <jamrial@gmail.com>
Since this behavior is intentional, use the VERBOSE level instead of WARNING as
it's nothing the user should worry about.
Signed-off-by: James Almer <jamrial@gmail.com>
The amount of padding samples reported by containers take into account the
extended samplerate in HE-AAC.
Fixes ticket #9671.
Signed-off-by: James Almer <jamrial@gmail.com>
Dual mono files report a channel count of 2 with each individual channel in its
own SCE, instead of both in a single CPE as is the case with standard stereo.
This commit handles this non default channel configuration scenario.
Fixes ticket #1614
Signed-off-by: James Almer <jamrial@gmail.com>
The doxy for av_channel_layout_describe() states that the user should look
at the return value to check if the string was truncated. Returning an error
code in this scenario goes against this and is an API break.
A proper fix for the timeout was applied to the Matroska demuxer in 94901a9518.
This reverts commit 8154cb7c2f.
If the stream's channel layout is first set into a native layout using codec
private parameters, this code here could potentially result in an invalid
native layout where popcnt(ch_layout.u.mask) != ch_layout.nb_channels being
propagated.
Fixes: Timeout printing a billion channels
Fixes: 48099/clusterfuzz-testcase-minimized-ffmpeg_dem_MATROSKA_fuzzer-6754782204788736
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This is needed to get LIBAVFORMAT_VERSION, used as part of the user agent.
Fixes a recent regression.
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Unlike avcodec_default_get_buffer2(), this version does not allocate more than
what the lavu image helper functions consider should be allocated for a given
frame.
Since the get_buffer2() documentation does not require any kind of buffer
padding for any of the planes, this should help detect bugs in our DR1 decoders
if they read beyond the end of the buffer, simulating what some library users
might experience when they use their own custom get_buffer2() implementations.
Signed-off-by: James Almer <jamrial@gmail.com>
Normally, both the source and dest frame would have only the old API fields
set, only the new API fields set, or both set. But in some cases, like when
calling av_frame_ref() using a non reference counted source frame where only
the old channel layout API fields were populated, the result would be the dst
frame having both the new and old fields populated.
This commit takes this into account and fixes the checks by calling
av_channel_layout_compare() only if the source frame has the new API fields
set, and doing sanity checks for the source frame old API fields if the new
ones are not set.
Signed-off-by: James Almer <jamrial@gmail.com>
A bug was found in dav1d <= 1.0.0 where the event flag New Sequence Header would
not be signaled for some samples using delayed random access points.
It has since been fixed, but nonetheless it's best to ensure the AVCodecContext
is filled with parameters when parsing the first frame, regardless of what events
were signaled.
Fixes ticket #9694.
Signed-off-by: James Almer <jamrial@gmail.com>
James Almer