A common pattern e.g. in libavcodec is replacing/updating buffer
references: unref old one, ref new one. This function allows simplifying
such code and avoiding unnecessary refs+unrefs if the references are
already equivalent.
Add AC-3/EAC-3 to allowed extensions file list.
From HTTP Live Streaming 2nd Edition draft-pantos-hls-rfc8216bis-07
section 3.1.3.Packed Audio, HLS demuxer need to support MP3/AC-3/EAC-3.
Reviewd-by: Steven Liu <liuqi05@kuaishou.com>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
This patch adds the coefficients for the linear gamma function (1,0,1,0)
to the colorspace filter.
Signed-off-by: Andrew Klaassen <clawsoon@yahoo.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Otherwise the result of such tests will not accurately reflect the
current state.
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It seems that in files where the BASF block isn't first, v1.1 ASF streams are
allowed to be non-22050. Either this format is really inconsistent, or
FX Fighter and Croc just ignored the sample rate field, requiring the v1.1
restriction in the first place.
This bumps the version to 1.2 in these streams so they're not "corrected".
Found in Alien Odyssey games files in:
./GRAPHICS/COMMBUNK/{{COMADD1,COMM2_{1,2,3E},COMM3_{2,3,4,5,6}},FADE{1,2}}.BRP
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
This proved beneficial for performance: For the sample [1] the number
of decicycles in one decode call decreased from 155851561 to 108158037
for Clang 10 and from 168270467 to 128847479 for GCC 9.3. For x86-32
compiled with GCC 9.3 and run on an x64 Haswell the number increased
from 158405517 to 202215769, so that the cached bitstream reader is only
enabled if HAVE_FAST_64BIT is set. These values are the average of 10
runs each looping five times over the input.
[1]: samples.ffmpeg.org/ffmpeg-bugs/trac/ticket2593/fraps_flv1_decoding_errors.avi
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The fraps decoder already checked for overreads manually (and errored
out in this scenario), yet it still enabled implicit checks, leading to
worse performance and more code size.
This commit disables the implicit bitstream reader checks. For the
sample [1] this improves performance from 195105896 to 155851561
decicycles for Clang 10 and from 222801887 to 168270467 decicycles when
compiled with GCC 9.3. These values are the average of 10 runs each
looping ten times over the input.
[1]: samples.ffmpeg.org/ffmpeg-bugs/trac/ticket2593/fraps_flv1_decoding_errors.avi
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Ut video format uses Huffman trees which are only implicitly coded
in the bitstream: Only the lengths of the codes are coded, the rest has
to be inferred by the decoder according to the rule that the longer
codes are to the left of shorter codes in the tree and on each level the
symbols are descending from left to right.
Because longer codes are to the left of shorter codes, one needs to know
how many non-leaf nodes there are on each level in order to know the
code of the next left-most leaf (which belongs to the highest symbol on
that level). The current code does this by sorting the entries to be
ascending according to length and (for entries with the same length)
ascending according to their symbols. This array is then traversed in
reverse order, so that the lowest level is dealt with first, so that the
number of non-leaf nodes of the next higher level is known when
processing said level.
But this can also be calculated without sorting: Simply count how many
leaf nodes there are on each level. Then one can calculate the number of
non-leaf nodes on each level iteratively from the lowest level upwards:
It is just half the number of nodes of the level below.
This improves performance: For the sample from ticket #4044 the amount
of decicycles for one call to build_huff() decreased from 1055489 to
446310 for Clang 10 and from 1080306 to 535155 for GCC 9.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Ut Video format stores Huffman tables in its bitstream by coding
the length of a given symbol; it does not code the actual code directly,
instead this is to be inferred by the rule that a symbol is to the left
of every shorter symbol in the Huffman tree and that for symbols of the
same length the symbol is descending from left to right. With one
exception, this is also what our de- and encoder did.
The exception only matters when there are codes of length 32, because
in this case the first symbol of this length did not get the code 0,
but 1; this is tantamount to pretending that there is a (nonexistent)
leaf of length 32. This is simply false. The reference software agrees
with this [1].
[1]: 2700a471a7/utv_core/HuffmanCode.cpp (L280)
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Now that the HuffEntries are no longer sorted by the MagicYUV decoder,
their symbols are trivial: The symbol of the element with index i is i.
They can therefore be removed. Furthermore, despite the length of the
codes being in the range 1..32 bits, the actual value of the codes is
<= 4096 (for 12 bit content). The reason for this is that the longer
codes are on the left side of the tree, so that the higher bits of
these codes are simply zero. By using an uint16_t for the codes and
removing the symbols entry, the size of each HuffEntry is decreased from
eight to four, saving 16KB of stack space.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The MagicYUV format stores Huffman tables in its bitstream by coding
the length of a given symbol; it does not code the actual code directly,
instead this is to be inferred by the rule that a symbol is to the left
of every shorter symbol in the Huffman tree and that for symbols of the
same length the symbol is ascending from left to right.
Our decoder implemented this by first sorting the array containing
length and symbol of each element according to descending length and
for equal length, according to ascending symbol. Afterwards, the current
state in the tree got encoded in a variable code; if the next array entry
had length len, then the len most significant bits of code contained
the code of this entry. Whenever an entry of the array of length
len was processed, code was incremented by 1U << (32 - len). So two
entries of length len have the same effect as incrementing code by
1U << (32 - (len - 1)), which corresponds to the parent node of length
len - 1 of the two nodes of length len etc.
This commit modifies this to avoid sorting the entries before
calculating the codes. This is done by calculating how many non-leaf
nodes there are on each level of the tree before calculating the codes.
Afterwards every leaf node on this level gets assigned the number of
nodes already on this level as code. This of course works only because
the entries are already sorted by their symbol initially, so that this
algorithm indeed gives ascending symbols from left to right on every
level.
This offers both speed- as well as (obvious) codesize advantages. With
Clang 10 the number of decicycles for build_huffman decreased from
1561987 to 1228405; for GCC 9 it went from 1825096 decicyles to 1429921.
These tests were carried out with a sample with 150 frames that was
looped 13 times; and this was iterated 10 times. The earlier reference
point here is from the point when the loop generating the codes was
traversed in reverse order (as the patch reversing the order led to
performance penalties).
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The MagicYUV format stores Huffman tables in its bitstream by coding
the length of a given symbol; it does not code the actual code directly,
instead this is to be inferred by the rule that a symbol is to the left
of every shorter symbol in the Huffman tree and that for symbols of the
same length the symbol is ascending from left to right. With one
exception, this is also what our decoder did.
The exception only matters when there are codes of length 32, because
in this case the first symbol of this length did not get the code 0,
but 1; e.g. if there were exactly two nodes of length 32, then they
would get assigned the codes 1 and 2 and a node of length 31 will get
the 31-bit code 1 which is a prefix of the 32 bit code 2, making the
Huffman table invalid. On the other hand, if there were only one symbol
with the length 32, the earlier code would accept this un-Huffman-tree.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The MagicYUV decoder currently sets both the length and the symbol field
of an array of HuffEntries; hereby the symbol of the ith entry (0-based)
is just i. Then said array gets sorted so that entries with greater
length are at the end and entries with the same length are ordered so
that those with smaller symbols are at the end. Afterwards the newly
sorted array is traversed in reverse order. This commit instead inverts
the ordering and traverses the array in its ordinary order in order to
simplify understanding.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Every plane of each slice has to contain at least two bytes for flags
and the type of prediction used.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes: left shift of negative value -768
Fixes: 25574/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_DXTORY_fuzzer-6012596027916288
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: left shift of negative value -256
Fixes: 25460/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_DXTORY_fuzzer-5073252341514240
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array read
Fixes: 25455/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_DXTORY_fuzzer-6327985731534848
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
AV1 decoder is supported on Tiger Lake+ platforms since libmfx 1.34
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Signed-off-by: Zhong Li <zhongli_dev@126.com>
Fixes: shift exponent -2 is negative
Fixes: 25683/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MOBICLIP_fuzzer-6434808492982272
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
