It only uses an AVIOContext and an AVBPrint.
When doing so, it turned out that several non-users of
ff_read_line_to_bprint_overwrite() and ff_bprint_to_codecpar_extradata()
relied on libavformat/internal.h to include bprint.h or avstring.h
for them. In order to avoid a repeat of this and in order to reduce
unnecessary dependencies, a forward declaration of struct AVBPrint is
used instead of including bprint.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible now that the next-API is gone.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Deprecated in 40cf1bbacc.
(The currently disabled filter vf_mcdeint and vf_uspp were users of
this field; they have not been changed, so that whoever wants to fix
them can see the state of these filters when they were disabled.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
These are auxiliary side-data functions, so they should have been
switched to size_t in d79e0fe65c,
but this has been forgotten.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The next pointer is kept at the end for backwards compatability until the
major bump, when it should ideally be moved at the front.
Signed-off-by: James Almer <jamrial@gmail.com>
The option allows to select a specific window instead of the whole
screen.
Reviewed-by: Andriy Gelman <andriy.gelman@gmail.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Keep on reading fragments until we got fragment_size amount of data, otherwise
we might get frames with 1-2 samples only if pa_stream_peek is called slightly
less frequently than sample rate.
Note that fragments might contain a lot less data than fragment_size, so
reading multiple fragments to get fragment_size amount of data is intentional.
Signed-off-by: Marton Balint <cus@passwd.hu>
Otherwise we might return 1-2 samples per packet if av_read_frame() call rate is
only sligthly less than the stream sample rate.
Signed-off-by: Marton Balint <cus@passwd.hu>
av_gettime_relative() is using the monotonic clock therefore more suitable for
elapsed time calculations. Packet timestamps are still kept absolute, although
that should be configurable in the future.
Related to ticket #9089.
Signed-off-by: Marton Balint <cus@passwd.hu>
It has been added in 6db42a2b6b,
yet since then none of the necessary create/free_device_capabilities
functions has been implemented, making this API completely useless.
Because of this one can already simplify
avdevice_capabilities_free/create and can already remove the function
pointers at the next major bump; given that the documentation explicitly
states that av_device_capabilities is not to be used by a user, it's
options can already be removed (save for the sentinel).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
xserver defines the endianness of the grabbed images. Use this information
to set the correct pixel format.
This also fixes format selection in configuration depth=32/bpp=32 with
xserver on a little endian machine. Before the patch, the big endian
layout 0RGB was always selected which is incorrect because BGR0 should
be used. RGB24 was also incorrectly assumed (but this format was removed
in xserver 1.20).
The big-endian settings can be tested using docker+qemu from a little-endian
machine:
$ docker run --rm --privileged multiarch/qemu-user-static --reset -p yes
$ docker run --rm -it -v /tmp:/tmp powerpc64/debian /bin/bash
In docker container
$ apt-get update
$ apt-get install xvfb
$ apt-get install x11-apps
To test AV_PIX_FMT_0RGB32
$ Xvfb :2 -screen 0 720x480x24 &
$ export DISPLAY=:2
$ xclock -geometry 720x480 -bg green #test different colors
On your host machine grab the frames using the following
command. View output to check that colors are rendered correctly
$ ./ffmpeg -y -f x11grab -i :2.0 -codec:v mpeg2video out.mp4
Other pixel formats can be tested by modifying how Xvfb is started in the docker
container:
AV_PIX_FMT_RGB565
$ Xvfb :2 -screen 0 720x480x16
AV_PIX_FMT_RGB555
$ Xvfb :2 -screen 0 720x480x15
AV_PIX_FMT_BGR24 / AV_PIX_FMT_RGB24
This is difficult to test because bpp=24 support was removed in xserver 1.20
https://lists.x.org/archives/xorg-devel/2018-February/056175.html?hmsr=joyk.com&utm_source=joyk.com&utm_medium=referral
However, I was able to run previous version of Xvfb (with some
modifications to force 24bpp) to check that images are rendered correctly.
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
As we get a new set of objects each frame anyway, we
do not gain anything by keeping the modifier constant.
This helps with capturing when switching your setup a
bit, e.g. from ingame to desktop or from X11 to wayland.
Signed-off-by: Mark Thompson <sw@jkqxz.net>
The kernel defaults to initializing the field to 0 when modifiers
are not used and this happens to be linear. If we end up actually
passing the modifier to a driver, tiling issues happen.
So if the kernel doesn't return a modifier set it explicitly to
INVALID. That way later processing knows there is no explicit
modifier.
Signed-off-by: Mark Thompson <sw@jkqxz.net>
The function is not used anywhere else and is causing mingw-w64 clang
builds to fail with
ffmpeg-git/libavdevice/decklink_dec.cpp:792:5: error: no previous prototype for function 'get_bmd_timecode' [-Werror,-Wmissing-prototypes]
int get_bmd_timecode(AVFormatContext *avctx, AVTimecode *tc, AVRational frame_rate, BMDTimecodeFormat tc_format, IDeckLinkVideoInputFrame *videoFrame)
Signed-off-by: Christopher Degawa <ccom@randomderp.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
./ffmpeg -list_devices true -f decklink -i dummy
[Blackmagic DeckLink indev @ 0x2f96d00] The "list_devices" option is deprecated: list available devices
[decklink @ 0x2f96400] The -list_devices option is deprecated and will be removed. Please use ffmpeg -sources decklink instead.
->
[Blackmagic DeckLink indev @ 0x306ed00] The "list_devices" option is deprecated: use ffmpeg -sources decklink instead
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
For the document(indevs.texi and outdevs.texi) used it as boolean.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
The patch will change the numerical values for the string constants so bump
micro version.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
This patch adds a select_region option to the xcbgrab input device.
If set to 1, the user will be prompted to select the grabbing area
graphically by clicking and dragging. A rectangle will be drawn to
mark the grabbing area. A single click with no dragging will select
the whole screen. The option overwrites the video_size, grab_x, and
grab_y options if set by the user.
For testing, just set the select_region option as follows:
ffmpeg -f x11grab -select_region 1 -i :0.0 output.mp4
The drawing happens directly on the root window using standard rubber
banding techniques, so it is very efficient and doesn't depend on any
X extensions or compositors.
Reviewed-by: Andriy Gelman <andriy.gelman@gmail.com>
Signed-off-by: Omar Emara <mail@OmarEmara.dev>
Apparently bmdFormatUnspecified needs SDK 11.0. It is just a fancy way of
checking for zero, so let's do that instead.
Fixes build issue since f1b908d20a.
Signed-off-by: Marton Balint <cus@passwd.hu>
Since bae8844e35, the AVPacket that is
intended to be used to return the demuxed packet is automatically
unreferenced when the demuxer returns an error. This makes an
av_packet_unref() in the lavfi demuxer redundant.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
av_new_packet() already sets the size. And if the packet is not
allocated by av_new_packet() (which seems to be impossible atm), both
pkt->size as well as size are 0, so setting it again is unnecessary in
this scenario, too.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes#7312, segmentation fault on close of X11 server
xcb_query_pointer_reply() and xcb_get_geometry_reply() can return NULL
if e.g. the X server closes or the connection is lost. This needs to
be checked in order to cleanly exit, because the returned pointers are
dereferenced later.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Reviewed-by: Andriy Gelman <andriy.gelman@gmail.com>
X2RGB10 tested on both Intel Gen9 and AMD Polaris 11. NV12 tested on
Intel Gen9 only - since it has multiple planes, this requires GetFB2.
Also add some comments to split the list up a bit.
The most useful feature here is the ability to automatically extract the
framebuffer format and modifiers. It also makes support for multi-plane
framebuffers possible, though none are added to the format table in this
patch.
This requires libdrm 2.4.101 (from April 2020) to build, so it includes a
configure check to allow compatibility with existing distributions. Even
with libdrm support, it still won't do anything at runtime if you are
running Linux < 5.7 (before June 2020).
Apparently the changes from 3c9185bf3a
aren't enough; even with that in place, I got errors like this
when trying to build for iOS:
src/libavdevice/avfoundation.m:135:5: error:
'AVCaptureDeviceTransportControlsPlaybackMode' is unavailable: not
available on iOS
AVCaptureDeviceTransportControlsPlaybackMode observed_mode;
^
The capture_started variable was never set, it is simpler to call the stop
functions unconditionally if the interface is available.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also by wrapping the SHM buffer in an AVBufferRef we eliminate yet another
possible memcpy improving performance.
Signed-off-by: Marton Balint <cus@passwd.hu>
Before this commit an av_assert0 would fail if a v4l2 device did not
support a target format.
For example,
./ffmpeg -f v4l2 -codec:v h264 -i /dev/video0 -f mpegts -
would signal an abort if /dev/video0 did not support h264.
The new behaviour is to return an AVERROR(EINVAL) error code. An
av_assert0 has been added to verify this return.
Fixes#6629
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Behave like we do for V4L2_BUF_FLAG_ERROR, implemented in commit 28f20d2ff4 .
For some devices (probably also related to the V4L driver implementation)
it happens that when invoking the ioctl DQBUF, the returned buffer is not
of the expected size. Here are two examples for such occurrences:
[video4linux2,v4l2 @ 0x258b440] Dequeued v4l2 buffer contains 609596 bytes, but 614400 were expected. Flags: 0x00000001.
/dev/video1: Invalid data found when processing input
[video4linux2,v4l2 @ 0x225f440] Dequeued v4l2 buffer contains 609508 bytes, but 614400 were expected. Flags: 0x00000001.
/dev/video1: Invalid data found when processing input
For the ffmpeg CLI tool this means it will stop capturing and exit.
The described behaviour was observed at least with one OmniVision USB
web cam and with some stk1160 devices.
If you search the web for the error message, you will find quite a few
instances of this problem. Some of them experienced on other devices.
Probably fixes ticket #4795
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
missed the category AV_CLASS_CATEGORY_DEVICE_VIDEO_INPUT lead to
ffmpeg -devices doesn't show gdigrab as a input device
FIx#7848
Found-by: dangibson
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Apparently in the new SDK one cannot query if VANC output is supported, so we
will fall back to non-VANC output if enabling the video output with VANC fails.
Fixes ticket #7867.
Signed-off-by: Marton Balint <cus@passwd.hu>
There is a calculation error in xcbgrab_reposition() that breaks
vertical repositioning on follow_mouse. It made the bottom
reposition occur when moving the mouse lower than N pixels after
the capture bottom edge, instead of before.
This commit fixes the calculation to match the documentation.
follow_mouse: centered or number of pixels. The documentation says:
When it is specified with "centered", the grabbing region follows
the mouse pointer and keeps the pointer at the center of region;
otherwise, the region follows only when the mouse pointer reaches
within PIXELS (greater than zero) to the edge of region.
In Windows if using scaling other than 100% then the grabbed window was not captured fully (cropped)
Signed-off-by: Dilshod Mukhtarov <dilshodm@gmail.com>
Allows arrangement of multiple windows such as:
ffmpeg -re -f lavfi -i mandelbrot -f sdl -window_x 1 -window_y 1 mandelbrot -vf waveform,format=yuv420p -f sdl -window_x 641 -window_y 1 waveform -vf vectorscope,format=yuv420p -f sdl -window_x 1 -window_y 481 vectorscop
Some changes by Marton Balint:
- allow negative position (partially or fully out-of-screen positions seem to
be sanitized automatically by SDL (or my WM?), so no special handling is
needed)
- only show window after the position is set
- do not use resizable and borderless flags at the same time, that caused
issues in ffplay
- add docs
Signed-off-by: Marton Balint <cus@passwd.hu>
Make the function static, or else Clang complains with:
error: no previous prototype for function 'decklink_get_attr_string' [-Werror,-Wmissing-prototypes]
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
This option is useful for maintaining input synchronization across N
different hardware devices deployed for 'N-way' redundancy.
The system time of different hardware devices should be synchronized
with protocols such as NTP or PTP, before using this option.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also bump the API version requirement to 10.9.5, because on olders versions
there were some reports of crashes using the undocumented, yet available
BMDDeckLinkDeviceHandle.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes ticket #5654.
The linesize can be greater than the minimum required. This copies the
frame taking linesize into account.
Signed-off-by: Rick Kern <kernrj@gmail.com>
Hook in libklvanc and use it for output of EIA-708 captions over
SDI. The bulk of this patch is just general support for ancillary
data for the Decklink SDI module - the real work for construction
of the EIA-708 CDP and VANC line construction is done by libklvanc.
Libklvanc can be found at: https://github.com/stoth68000/libklvanc
Updated to reflect feedback from Marton Balint <cus@passwd.hu>,
Carl Eugen Hoyos <ceffmpeg@gmail.com>, Aaron Levinson
<alevinsn_dev@levland.net>, and Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
If the user provides a valid timecode_format look for timecode of that
format in the capture and if found store it on the video avstream's
metadata.
Slightly modified by Marton Balint to capture per-frame timecode as well.
Signed-off-by: Marton Balint <cus@passwd.hu>
