1
0
mirror of https://github.com/FFmpeg/FFmpeg.git synced 2024-12-02 03:06:28 +02:00
Commit Graph

44550 Commits

Author SHA1 Message Date
Carl Eugen Hoyos
628ce8b8b6 flvdec: Set avg_frame_rate for video streams
Signed-off-by: Martin Storsjö <martin@martin.st>
2017-03-22 14:26:15 +02:00
Martin Storsjö
8e2346154e libavutil: Hook up the rest of the gcc specific attributes to clang as well
Hook up all attributes that don't have a MSVC specific version at the
moment.

See f637046d31 for details.

These don't seem to be critical for building with clang in MSVC mode
though, and thus haven't been hooked up until now.

These seem to build fine with as old clang as 3.3 at least.
(clang 3.3 disguises itself as gcc 4.2 normally, so all of these
have been used for clang before, except for av_cold.)

The clang version numbers themselves are useless for detecting what
attributes are available, since Apple's clang builds use a completely
different versioning (presenting itself as e.g. clang 8.0 instead
of 3.8).

Signed-off-by: Martin Storsjö <martin@martin.st>
2017-03-22 14:25:45 +02:00
Martin Storsjö
3aa9c523e9 libavutil: Define the noreturn attribute for clang in MSVC mode as well
This is a follow-up to f637046d31.

Without the noreturn attribute set, avconv_opt.c fails to build after
d2e6dd32a4 with the error "control may reach end of non-void function".
By making sure the noreturn attribute is set properly, this compiles
as intended.

Signed-off-by: Martin Storsjö <martin@martin.st>
2017-03-21 22:57:21 +01:00
Luca Barbato
a46a4f722d dca: Refactor dca_filter_channels() a little
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2017-03-21 12:08:52 +01:00
Luca Barbato
e245d4f45c dca: Validate the channel map
Having a mismatch between the number of channels in the stream and those
in the channel map will lead to a segfault or worse.

Bug-Id: 1016

CC: libav-stable@libav.org

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2017-03-21 12:08:49 +01:00
Konda Raju
3df77b58e3 nvenc: Allow different const qps for I, P and B frames
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2017-03-21 12:06:44 +01:00
Luca Barbato
ca960161f0 rtsp: Move message parsing to a separate function
Make easier to handle the polling function before we implement
full threading support.
2017-03-21 04:23:41 +01:00
Luca Barbato
bd805964f4 configure: Do not treat JACK as a system library
JACK is not commonly installed and should not be picked up as a
dependency unless specifically requested.
2017-03-21 04:23:41 +01:00
Mark Thompson
303fadf596 avconv: Document the -init_hw_device option 2017-03-20 23:15:43 +00:00
Mark Thompson
aa6b2e081c avconv: Enable generic hwaccel support for VDPAU 2017-03-20 23:15:43 +00:00
wm4
1a7ddba576 lavc: vdpau: add support for new hw_frames_ctx and hw_device_ctx API
This supports retrieving the device from a provided hw_frames_ctx, and
automatically creating a hw_frames_ctx if hw_device_ctx is set.

The old API is not deprecated yet. The user can still use
av_vdpau_bind_context() (with or without setting hw_frames_ctx), or use
the API before that by allocating and setting hwaccel_context manually.
2017-03-20 23:15:43 +00:00
wm4
16a163b55a lavc: Add hwaccel_flags field to AVCodecContext
This "reuses" the flags introduced for the av_vdpau_bind_context() API
function, and makes them available to all hwaccels. This does not affect
the current vdpau API, as av_vdpau_bind_context() should obviously
override the AVCodecContext.hwaccel_flags flags for the sake of
compatibility.
2017-03-20 23:15:43 +00:00
Mark Thompson
62a1ef9f26 avconv: Enable generic hwaccel support for VAAPI 2017-03-20 23:15:43 +00:00
Mark Thompson
d2e6dd32a4 avconv: Generic device setup
Not yet enabled for any hwaccels.
2017-03-20 23:15:43 +00:00
Mark Thompson
b7487f4f3c hwcontext: Make it easier to work with device types
Adds functions to convert to/from strings and a function to iterate
over all supported device types.  Also adds a new invalid type
AV_HWDEVICE_TYPE_NONE, which acts as a sentinel value.
2017-03-20 23:15:43 +00:00
Mark Thompson
b266ad56fe hwcontext: Add device derivation
Creates a new device context from another of a different type which
refers to the same underlying hardware.
2017-03-20 23:15:43 +00:00
Diego Biurrun
b864230c49 rtmp: Move RTMP digest calculation to a separate file
The rtmpcrypt protocol requires it.
2017-03-20 13:16:51 +01:00
Diego Biurrun
cfee5e1a0f build: Add missing object dependency for extract_extradata bitstream filter 2017-03-20 13:16:51 +01:00
Martin Storsjö
7995ebfad1 arm/aarch64: vp9: Fix vertical alignment
Align the second/third operands as they usually are.

Due to the wildly varying sizes of the written out operands
in aarch64 assembly, the column alignment is usually not as clear
as in arm assembly.

Signed-off-by: Martin Storsjö <martin@martin.st>
2017-03-16 23:09:00 +02:00
James Almer
827a05eaa9 matroskaenc: add support for Spherical Video elements
Signed-off-by: James Almer <jamrial@gmail.com>
Minor cosmetic changes by committer.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2017-03-15 17:52:12 -04:00
Luca Barbato
0d8013b88b configure: Replace -no_weak_symbols with -Werror=partial-availability
Jack uses weak symbols on purpose.
2017-03-15 20:24:52 +01:00
Diego Biurrun
681a86aba6 x86: fft: Port to cpuflags 2017-03-14 17:23:32 +01:00
Diego Biurrun
e9bb77fb10 x86: h264: Simplify DEQUANT macro with cpuflags 2017-03-14 17:23:32 +01:00
Diego Biurrun
307eb1a8ee x86: vp8dsp: port FILTER_BILINEAR macro to cpuflags 2017-03-14 17:23:32 +01:00
Diego Biurrun
994c4bc107 x86util: Port all macros to cpuflags
Also do some small cosmetic changes: Drop pointless _MMX suffix from ABSD2
macro name, drop pointless check for MMX support, we always assume MMX is
available in our SIMD code, fix spelling.
2017-03-14 17:23:32 +01:00
Anton Khirnov
522d850e68 h264_cavlc: check the value of run_before
Section 9.2.3.2 of the spec implies that run_before must not be larger
than zeros_left.

Fixes invalid reads with corrupted files.

CC: libav-stable@libav.org
Bug-Id: 1000
Found-By: Kamil Frankowicz
2017-03-12 20:42:13 +01:00
Anton Khirnov
83b2b34d06 h2645_parse: use the bytestream2 API for packet splitting
The code does some nontrivial jumping around in the buffer, so it is
safer to use a checked API rather than do everything manually.

Fixes a bug in nalff parsing, where the length field is currently not
counted in the buffer size check, resulting in possible overreads with
invalid files.

CC: libav-stable@libav.org
Bug-Id: 1002
Found-By: Kamil Frankowicz
2017-03-12 20:42:12 +01:00
Anton Khirnov
b76f6a76c6 h264dec: initialize field_started to 0 on each decode call
It might be incorrectly set to 1 if the previous call exited with an
error.

Bug-Id: 1019
CC: libav-stable@libav.org
2017-03-12 20:42:12 +01:00
Martin Storsjö
3a0d5e206d arm/aarch64: vp9itxfm: Skip loading the min_eob pointer when it won't be used
In the half/quarter cases where we don't use the min_eob array, defer
loading the pointer until we know it will be needed.

Signed-off-by: Martin Storsjö <martin@martin.st>
2017-03-11 22:07:30 +02:00
Martin Storsjö
98ee855ae0 arm: vp9itxfm: Template the quarter/half idct32 function
This reduces the number of lines and reduces the duplication.

Also simplify the eob check for the half case.

If we are in the half case, we know we at least will need to do the
first three slices, we only need to check eob for the fourth one,
so we can hardcode the value to check against instead of loading
from the min_eob array.

Since at most one slice can be skipped in the first pass, we can
unroll the loop for filling zeros completely, as it was done for
the quarter case before.

This allows skipping loading the min_eob pointer when using the
quarter/half cases.

Signed-off-by: Martin Storsjö <martin@martin.st>
2017-03-11 22:07:12 +02:00
Diego Biurrun
b57a95d014 cfhd: Add FATE tests 2017-03-09 18:37:29 +01:00
Kieran Kunhya
5f794aa165 Add Cineform HD Decoder
Decodes YUV 4:2:2 10-bit and RGB 12-bit files.
Older files with more subbands, skips, Bayer, alpha not supported.

Further fixes and refactorings by Anton Khirnov <anton@khirnov.net>,
Diego Biurrun <diego@biurrun.de>, Vittorio Giovara <vittorio.giovara@gmail.com>

Signed-off-by: Diego Biurrun <diego@biurrun.de>
2017-03-09 18:37:29 +01:00
Konda Raju
f6790b5e10 add initial QP value options
Signed-off-by: Diego Biurrun <diego@biurrun.de>
2017-03-09 17:24:00 +01:00
wm4
8a60bba0ae avcodec: clarify some decoding/encoding API details
Make it clear that there is no timing-dependent behavior. In particular,
there is no state in which both input and output are denied, and where
you have to wait for a while yourself to make progress (apparently some
hardware decoders like to do this).

Avoid wording that makes references to time. It shouldn't be mistaken
for some kind of asynchronous API (like POSIX read() can return EAGAIN
if there is no new input yet). It's a state machine, so try to use
appropriate terms.

Signed-off-by: Diego Biurrun <diego@biurrun.de>
2017-03-09 17:07:24 +01:00
Vittorio Giovara
0429f01e47 mkv: Export bounds and padding from spherical metadata
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2017-03-07 11:07:03 -05:00
James Almer
251849f06c mkv: Add support for Spherical Video elements
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2017-03-07 11:07:03 -05:00
Vittorio Giovara
a825980f9f mov: Export bounds and padding from spherical metadata
Update the fate test as needed.

Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2017-03-07 11:07:02 -05:00
Vittorio Giovara
6bce6aa17d spherical: Add tiled equirectangular type and projection-specific properties
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2017-03-07 11:07:02 -05:00
Vittorio Giovara
114324b9e0 mov: Validate cubemap layout 2017-03-07 11:07:02 -05:00
Vittorio Giovara
0f8512c4a8 mov: Validate spherical metadata version 2017-03-07 11:07:02 -05:00
Vittorio Giovara
2365772300 mov: Ignore old spherical metadata when newer version is present 2017-03-07 11:07:02 -05:00
Aaron Colwell
17adcc40ad mov: Fix spherical metadata_source parsing
Signed-off-by: James Almer <jamrial@gmail.com>
2017-03-07 11:07:01 -05:00
Luca Barbato
81bffae368 configure: Check for -no_weak_imports in ldflags on macOS
Recent versions of macOS provide more POSIX API (in particular,
clock_gettime) than previous versions and recent Apple toolchains
provide all that API, even when targeting older releases without
said API. Disallow linking to functions which might not be available
at runtime.

To actually have an effect, either add
--extra-cflags="-mmacosx-version-min=10.11" (or any other version
prior to 10.12) or set MACOSX_DEPLOYMENT_TARGET=10.11 when running
configure.

As a workaround for libav versions without this fix, one can
also add --extra-cflags="-mmacosx-version-min=10.11
-Werror=partial-availability" while running configure.

The -no_weak_imports flag is new in Xcode 8; in Xcode 7 it is not
supported. This is not an issue since Xcode 7 only ships with the
10.11 macOS SDK, which lacks clock_gettime.

Bug-Id: 1033

CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
2017-03-07 09:48:55 +02:00
Diego Biurrun
57b753b445 build: Prefer NASM assembler over YASM
NASM is more actively maintained and permits generating dependency information
as a sideeffect of assembling, thus cutting build times in half.
2017-03-07 08:32:37 +01:00
Diego Biurrun
f54037da8a build: Make x86 assembler commandline-selectable 2017-03-07 08:32:37 +01:00
Diego Biurrun
51411eb7ff build: Special-case handling of SDL CFLAGS
SDL adds some "special" CFLAGS that interfere with building normal
binaries. Capture those CFLAGS separately and avoid adding them to
the general CFLAGS.
2017-03-07 08:32:37 +01:00
Diego Biurrun
003124ebf4 build: Fix logic of clock_gettime() check
We should only check for clock_gettime() if _POSIX_MONOTONIC_CLOCK is
available and do a full link check for clock_gettime() in all cases.
2017-03-07 08:32:37 +01:00
Vittorio Giovara
b44bd7ee7f pixlet: Fix architecture-dependent code and values
The constants used in the decoder used floating point precision,
and this caused different values to be generated on different
architectures. Additionally on big endian machines, the fate test
would output bytes in native order, which is different from the one
hardcoded in the test.

So, eradicate floating point numbers and use fixed point (32.32)
arithmetics everywhere, replacing constants with precomputed integer
values, and force the pixel format output to be the same in the fate
test.

Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2017-03-06 18:15:02 -05:00
Diego Biurrun
808ef43597 build: Explicitly set 32-bit/64-bit object formats for nasm/yasm
Consistently use object format names with "32" suffix and set object format
to "win64" on Windows x86_64, which fixes assembling with nasm.
2017-03-05 14:38:56 +01:00
Diego Biurrun
6eef263aca x86: Merge align directives into SECTION_RODATA declarations where possible 2017-03-05 14:26:06 +01:00