This allows setting the filter_src option for these demuxers, too,
which wasn't possible at all before (where the option only was set
via URL parameters for RTSP).
Signed-off-by: Martin Storsjö <martin@martin.st>
avconv doesn't map video streams to a muxer without specifying a
manual stream mapping if the default video codec is CODEC_ID_NONE.
Signed-off-by: Martin Storsjö <martin@martin.st>
With the changes in 3b3ea34655,
"Remove all uses of deprecated AVOptions API", av_opt_flag_is_set
was broken, since it now uses av_opt_find, which doesn't return
named constants unless a unit to look for the constant in is given.
This broke enabling LATM encapsulated AAC output in RTP.
Signed-off-by: Martin Storsjö <martin@martin.st>
It was broken in 3b3ea34655
"Remove all uses of deprecated AVOptions API", where any
presence of a payload_type AVOption caused its value to
be returned, even if it wasn't set (and thus had the default
-1 value).
This caused the RTP muxer to be broken.
Signed-off-by: Martin Storsjö <martin@martin.st>
Eventually, the old way of passing options by adding
stuff to the URL can be dropped.
This avoids having to tamper with the user-specified URL to
pass options on the transport mode. This also works better
with redirects, since the options don't need to be parsed out
from the URL.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use defines for shortening common parts, omit the .dbl named
initializer (since it's the first element in the union).
Signed-off-by: Martin Storsjö <martin@martin.st>
This eases adding options that are common for both. The
AV_OPT_FLAG_EN/DECODING_PARAM still indicates whether they belong
to the muxer or demuxer.
Signed-off-by: Martin Storsjö <martin@martin.st>
No application rely on this count being correct as far as
I know, but if we write a nonzero count value, it might just
as well be the right one.
Signed-off-by: Martin Storsjö <martin@martin.st>
DSS enables this automatically if streaming VOD over TCP. If
enabled, the server feeds packets faster than realtime, screwing
up RTCP NTP based timestamps.
Also, DSS doesn't indicate that this was indicated, if it was
enabled automatically (although if it was requested to be enabled,
a header saying that it was enabled is added, but this isn't
added if it is enabled automatically), making it even harder
to detect and work around properly without explicitly asking
for it to be disabled(/enabled, if we were able to support it).
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids writing these entries doubly if transcoding from
flv to flv, since the muxer blindly writes any and all metadata
keys set, in addition to the fixed fields that the muxer
always writes.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes the RTMP writing code able to handle FLV data
fed in arbitrarily small or large chunks, with multiple
consecutive packets in one write call, or having the FLV
packet header split over numerous write calls.
When used in conjunction with the flv muxer, the AVIO buffer
size still needs to be large enough to fit the initial metadata
packet though, since the size of that packet is written with a
seekback.
Signed-off-by: Martin Storsjö <martin@martin.st>
If not enough bytes are available, keep track of them and skip
them on next call.
In practice, if these trailer bytes are written in a separate
call, there is no other data written in this call, making it
fall into the "FLV packet too small" case currently - working,
but not as intended.
This patch makes the code more robust, handling all cases
except for having the FLV packet header split over multiple
write calls.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes this compilation warning, by making endptr a non-const
pointer, as required by strtol:
In function ‘udp_open’:
warning: passing argument 2 of ‘strtol’ from incompatible pointer type
Signed-off-by: Martin Storsjö <martin@martin.st>
This helps catching cases where the format string doesn't
match what is passed in, or injection bugs where user data
is passed in as format string.
Signed-off-by: Martin Storsjö <martin@martin.st>
In this case, the string that was passed couldn't contain
user-defined data and thus there was no risk for injection
bugs, but it's safer this way, if we later change the
content of the options string.
Signed-off-by: Martin Storsjö <martin@martin.st>
This actually matches what av_get_double did earlier, the
0.0/0.0 division was intentional, for producing NAN.
Still keeping the check for the return value from
av_get_number, for clarity.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some received packets can have size 0. The return value from
av_malloc(0) may be NULL, which is ok if the size was 0. On
OS X, however, the returned pointer is non-null but leads to
crashes when trying to free it.
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently, the url_interrupt_cb callback will abort all IO
after the first received signal. This makes the output files
from e.g. the mov muxer to be unreadable if the transcode is
aborted with ctrl+c.
After this patch, the first signal cleanly breaks out of
the transcoding loop, but won't forcibly abort all IO.
After the second signal is received, the url_interrupt_cb
callback will abort all IO.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids doing a division by zero if the option wasn't found,
or wasn't an option of an appropriate type.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since a private class is set for this muxer, the callers will
assume that the private data starts with an AVClass pointer.
If no such member exists, the first few bytes of the struct
will be overwritten, and the class pointer may be broken at
any later time.
Signed-off-by: Martin Storsjö <martin@martin.st>
The later parsing of payload data depends on the configuration
being present. If it hasn't been configured properly yet,
parsing a data packet may lead to a crash.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is more like what VLC does. If the server doesn't mention
supporting GET_PARAMETER in response to an OPTIONS request,
VLC doesn't send any keepalive requests at all. After this patch,
libavformat will still send OPTIONS keepalives if GET_PARAMETER
isn't explicitly said to be supported.
Some RTSP cameras don't support GET_PARAMETER, and will
close the connection if this is sent as keepalive request
(but support OPTIONS just fine, but probably don't need any
keepalive at all). Some other cameras don't support using
OPTIONS as keepalive, but require GET_PARAMETER instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
Earlier, AVIO_RDWR was handled as READ, and all the checks
for the AVIO_WRONLY flag explicitly meant the write-only case.
When changed from old AVIO/URL contants to AVIO_FLAG in
59d96941f0, these comparisons were updated incorrectly, by
mapping checks for AVIO_WRONLY to checks for AVIO_FLAG_WRITE.
When receiving RTP over UDP, the urlcontext is opened with
READ_WRITE flags.
This patch updates the flag comparisons to check for the same
conditions as the code did prior to 59d96941f0.
Signed-off-by: Martin Storsjö <martin@martin.st>
While deprecated, they're totally useless as long as their values
are different from the AVIO_FLAG values that are used internally.
Currently, this leads to old libav applications still compiling
correctly (since we haven't removed the fallback wrappers), but
failing since the functions internally compare to the new AVIO_FLAG
values.
These should be removed at some point, but they aren't removed yet.
The intent is to be able to recompile an old application against
the new ABI without modifying the code, and this doesn't work
currently.
Signed-off-by: Martin Storsjö <martin@martin.st>
If there are no variants, the total bitrate of the single
stream isn't known, and exporting variant_bitrate = 0 does
look weird, since there really aren't any variants.
Signed-off-by: Martin Storsjö <martin@martin.st>
This should hopefully fix roundup issue 2586.
This commit only implements it in the demuxer, not in the
protocol handler. If desired, some of the code could be
refactored to be shared by both implementations.
Signed-off-by: Martin Storsjö <martin@martin.st>
This can later be extended to support other AES bit sizes,
encryption, other crypto algorithms, reading the key from a URL, etc.
In order to use it, the key and initialization vector has to be
passed via AVOptions. Since such options can't be passed to
protocols from the command line, the protocol is currently
only for libavformat internal use.
Signed-off-by: Martin Storsjö <martin@martin.st>
Setting this should fix the FATE build failure on DragonFly BSD,
since inet_aton only is visible if __BSD_VISIBLE is set.
Alternatively, a line defining __BSD_VISIBLE=1 could be
added at the top of os_support.c. For FreeBSD, similar lines
are required in libavdevice/bktr.c and libavdevice/oss_audio.c, too.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes seek_test to be rebuilt when its dependencies
has changed. The changes to the dependencies didn't usually matter
in practice, but the introduction of side data in AVPacket required
a recompilation.
Signed-off-by: Martin Storsjö <martin@martin.st>
After switching this from a statically allocated array to a
dynamically allocated one in the major bump, this needs explicit
freeing.
Signed-off-by: Martin Storsjö <martin@martin.st>
DTX, discontinuous transmission, allows emitting frames with
comfort noise when no voice is detected in the input audio.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also rename the incorrectly named enc_bitrate to enc_mode, use the
enc_bitrate variable for storing the last chosen bitrate.
This avoids continuous warning log messages if not using an
exactly matching bitrate, while still allowing changing bitrate
at any point.
Signed-off-by: Martin Storsjö <martin@martin.st>
Dynamically print the supported bitrates from the local table,
instead of using a hardcoded log message.
Signed-off-by: Martin Storsjö <martin@martin.st>
Include VisualOn to clarify the codec name, but remove the
actual library name from the user-friendly description.
Also mention Android, to clarify which VisualOn implementation
this refers to, since they do sell other variants of the same
code, too.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids warnings of this kind, everywhere priv_class
is initialized:
warning: initialization discards qualifiers from pointer target type
Signed-off-by: Martin Storsjö <martin@martin.st>
This code could be executed if the demuxer reads more than one
segment before returning from av_open_input_stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
Stop the avio input at a point where amf_parse_object can
continue parsing the end of the object seamlessly, when all
data is available.
If unsupported data is encountered within the keyframes object,
try seeking to the start of the keyframes object - if the seek
back was successful, the caller can continue parsing the rest
of the AMF data.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö
