It can't because the corresponding trees don't have any loose ends.
Removing the checks also removed an instance of av_log(NULL (with a
nonsense message) from the codebase.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It currently uses 9 bits per table, but there are no codes with
nine bits at all, while there are codes with eight, ten and eleven bits.
So reducing the table size to eight bits will not reduce the amount of
codes that can be parsed in the first step, but it allows to reduce the
size of the motion-vector VLC.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes: signed integer overflow: 570425356 * 6 cannot be represented in type 'int
Fixes: 25929/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_EXR_fuzzer-5099197739827200
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Regression since: ca49476ace
Fixes: out of array write
Fixes: 25786/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ADPCM_PSX_fuzzer-5704869380620288
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 872415232 * 7 cannot be represented in type 'int'
Fixes: signed integer overflow: -2013265888 + -1744830464 cannot be represented in type 'int'
Fixes: 25834/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MOBICLIP_fuzzer-5471406434025472
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The mfra has enough information to enable seeking, and reading it is
behind an AVOption flag, so we shouldn't require that sidx information
also be present in order to seek using the fragment index.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Fixes vf_scale outputting RGB AVFrames with limited range flagged
in case either input or output specifically sets the range.
This is the reverse of the logic utilized for RGB and PAL8 content
in sws_setColorspaceDetails.
ccca62ef99 added new VP9 VDPAU profiles
and as a consequence AV_PIX_FMT_VDPAU can now be twice in the list of
pixel formats used for format negotiation by ff_thread_get_format(); yet
there is only one entry in said list reserved for VDPAU, leading to a
stack-buffer overflow. This commit fixes this by making sure that
AV_PIX_FMT_VDPAU will not occur twice in said list.
Fixes Coverity ticket 1468046.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The SheerVideo decoder uses two VLC tables and these are in turn created
from structures (called SheerTable) that are naturally paired. This
commit unifies these pairs of SheerTables to arrays and unifies creating
the VLC tables.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The SheerVideo decoder uses VLC tables which are currently stored in
large arrays that contain the length of each leaf of the corresponding
tree from left to right, taking 15.5KB of space. But all these arrays
follow a common pattern: First the entries are ascending and then they
are descending with lots of successive entries have the same value.
Therefore it makes sense to use a run-length encoding to store them, as
this commit does. Notice that the length 16 has to be treated specially
because there are arrays with more than 256 consecutive entries with
value 16 and because the length of the entries start to descend from
this length onward.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This has happened if the format changed midstream and if the new packet
is so small that it is instantaneously rejected: In this case the VLC
tables were for the new format, although the context says that they are
still the ones for the old format. It can also happen if the format
changed midstream and the allocation of the new tables fails. If the
next packet is a packet for the old format, the decoder thinks it
already has the correct VLC tables, leading to a segfault.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Don't needlessly copy an array around; don't create a table with
default symbols; and use smaller types to save stack space: The longest
code here is 16 bits, so one can store the codes in this type.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes: negation of -2147483648 cannot be represented in type 'int'; cast to an unsigned type to negate this value to itself
Fixes: 25675/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_G729_fuzzer-4786580731199488
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: left shift of negative value -4
Fixes: 25723/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TAK_fuzzer-6250580752990208
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Said escape code is only six bits long, so that one has at least 25 - 6
bits in the bitstream reader's cache after reading it; therefore the
whole following 18 bits (containing the actual code) are already in the
bitstream reader's cache, making it unnecessary to reload the cache.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This should increase the effectiveness of ffio_ensure_seekback by reducing the
number of buffer reallocations and memmoves/memcpys because even a small
seekback window requires max_buffer_size+window_size buffer space.
Signed-off-by: Marton Balint <cus@passwd.hu>
Previously ffio_ensure_seekback never flushed the buffer, so successive
ffio_ensure_seekback calls were all respected. This could eventually cause
unlimited memory and CPU usage if a demuxer called ffio_ensure_seekback on all
it's read data.
Most demuxers however only rely on being able to seek back till the position of
the last ffio_ensure_seekback call, therefore we change the semantics of
ffio_ensure_seekback so that a new call can invalidate seek guarantees of the
old. In order to support some level of "nested" ffio_ensure_seekback calls, we
document that the function only invalidates the old window (and potentially
discards the already read data from the IO buffer), if the newly requested
window does not fit into the old one.
This way we limit the memory usage for ffio_ensure_seekback calls requesting
consecutive data windows.
Signed-off-by: Marton Balint <cus@passwd.hu>
It was possible for the old code to seek back before the most recently read
data if start of a new multipart was across read boundaries. Now we read some
small sections multiple times to avoid this, but that is OK.
Signed-off-by: Marton Balint <cus@passwd.hu>
The new buf_size was detemined too conservatively, maybe because of the
off-by-one issue which was fixed recently in fill_buffer. We can safely
substract 1 more from the new buffer size, because max_buffer_size space must
only be guaranteed when we are reading the last byte of the requested window.
Comparing the new buf_size against filled did not make a lot of sense, what
makes sense is that we want to reallocate the buffer if the new buf_size is
bigger than the old, therefore the change in the check.
Signed-off-by: Marton Balint <cus@passwd.hu>
Existing code did not check if the requested seekback buffer is
already read entirely. In this case, nothing has to be done to guarantee
seekback.
Signed-off-by: Marton Balint <cus@passwd.hu>
There was an off-by-one error when checking if the IO buffer still has enough
space till the end. One more byte can be safely written.
Signed-off-by: Marton Balint <cus@passwd.hu>
ad73b32d29 added some code for freeing in
the input's config_props function, yet this is unnecessary as uninit is
called anyway if config_props fails.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This has happened when initializing the motion estimation context if
width or height of the video was smaller than the block size used
for motion estimation and if the motion interpolation mode indicates
not to use motion estimation.
The solution is of course to only initialize the motion estimation
context if the interpolation mode uses motion estimation.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The latter code relies upon the dimensions to be not too small;
otherwise one will call av_clip() with min > max lateron which aborts
in case ASSERT_LEVEL is >= 2 or one will get a nonsense result that may
lead to a heap-buffer-overflow/underflow. The latter has happened in
ticket #8248 which this commit fixes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
There is one general rtsp connection plus two connections per stream (rtp/rtcp).
Reviewed-by: Zhao Zhili <zhilizhao@tencent.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
There is no need to cast const away (even if it was harmless) and to
copy the object at all.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Now that the correct number of codes is used, it is no longer necessary
to initialize the lengths of the codes at all any more as the length of
the actually used codes is set later anyway.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It is always zero; it referred to the INIT_VLC_USE_STATIC flag which has
been removed in 595324e143.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Commit bbc0d0c1fe made the mjpeg decoder
use default Huffman tables when none are given, yet when initializing
the default Huffman tables, it did not use the correct number of entries
of the arrays used to initialize the tables, but instead it used the
biggest entry + 1 (as if it were a continuous array 0..biggest entry).
This worked because the ff_init_vlc_sparse() (and its predecessors)
always skipped entries with a length of zero and the length of the
corresponding elements was always initialized to zero with only the
sizes of the actually existing elements being set to a size > 0 lateron.
Yet since commit 1249698e1b this is no
longer so, as build_vlc() actually read the array containing the values
itself. This implies that the wrong length now leads to a read beyond
the end of the given array; this could lead to crashs (but usually
doesn't); it is detectable by ASAN* and this commit fixes it.
*: AddressSanitizer: global-buffer-overflow on address xy
...
xy is located 0 bytes to the right of global variable 'avpriv_mjpeg_val_ac_luminance'
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Commit 1249698e1b made
ff_mjpeg_decode_dht() call build_vlc() with a wrong (too hight)
number of codes. The reason it worked is that the lengths of the extraneous
entries is initialized to zero and ff_init_vlc_sparse() ignores codes
with a length of zero. But using a too high number of codes was
nevertheless bad, because a) the assert in build_vlc() could have been
triggered (namely if the real amount of codes is 256) and b) the loop in
build_vlc() uses initialized data (leading to Valgrind errors [1]).
Furthermore, the old code spend CPU cycles in said loop although the
result won't be used anyway.
[1]: http://fate.ffmpeg.org/report.cgi?slot=x86_64-archlinux-gcc-valgrind&time=20201008025137
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Added VDPAU to list of supported formats for VP9 420 10 and 12 bit
formats. Add VP9 10/12 Bit support for VDPAU
Signed-off-by: Philip Langdale <philipl@overt.org>
This is currently safe here, because the effective lifetime of
adaptionset_lang is parse_manifest_adaptationset() (i.e. the pointer
gets overwritten each time on entry to the function and gets freed
before exiting the function), but it is nevertheless safer to reset the
pointer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Use xmlFree instead of av_freep
snip from libxml2:
* xmlGetProp:
...
* Returns the attribute value or NULL if not found.
* It's up to the caller to free the memory with xmlFree().
According to libxml2, you are supposed to use xmlFree instead of free
on the pointer returned by it, and also using av_freep on Windows will
call _aligned_free instead of normal free, causing _aligned_free to raise
SIGTRAP and crashing ffmpeg and ffplay.
Signed-off-by: Christopher Degawa <ccom@randomderp.com>
