This makes sure the actual stream parameters are used, which is
important mainly for hardware decoding+filtering cases, which would
previously require various weird workarounds to handle the fact that a
fake software graph has to be constructed, but never used.
This should also improve behaviour in rare cases where
avformat_find_stream_info() does not provide accurate information.
This merges Libav commit a3a0230. It was previously skipped.
The code in flush_encoders() which sets up a "fake" format wasn't in
Libav. I'm not sure if it's a good idea, but it tends to give
behavior closer to the old one in certain corner cases.
The vp8-size-change gives different result, because now the size of
the first frame is used. libavformat reported the size of the largest
frame for some reason.
The exr tests now use the sample aspect ratio of the first frame. For
some reason libavformat determines 0/1 as aspect ratio, while the
decoder returns the correct one.
The ffm and mxf tests change the field_order values. I'm assuming
another libavformat/decoding mismatch.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This will be useful in the following commit, after which the muxer
timebase is not always available when encoding.
This merges Libav commit 3e265ca. It was previously skipped.
There are some changes with how/when the mux_timebase field is set,
because the Libav approach often causes a too imprecise time base
to be set. This is hard, because the muxer's write_header function
can readjust the timebase, at which point we might already have
encoded packets buffered. (It might be better to buffer them after
the encoder, instead of after all the timestamp handling logic
before muxing.)
The two FATE tests change because the output time base is raised
for subtitles. (Needed to avoid certain rounding issues in other
cases.)
Includes a minor merge fix by Mark Thompson, and
avconv: Move rescale to stream timebase before monotonisation
also by Mark Thompson <sw@jkqxz.net>.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This should fix the fate failure due to a truncated last frame.
Alternatively the frame could be dropped.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 664/clusterfuzz-testcase-4917047475568640
The change to fate is due to a truncated last frames which is now detected as damaged.
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
According to the spec[1], a value of 0 means the footer is present and a value
of 1 means it's absent, the exact opposite of header presence flag where 1
means present and 0 absent.
The reason for this is compatibility with APEv1 tags, where there's no header,
footer presence was mandatory for all files, and the flags field was a zeroed
reserved field.
[1] http://wiki.hydrogenaud.io/index.php?title=Ape_Tags_Flags
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Current code returned the number of channels as channel layout in that case,
and if nret is not set then unknown layouts are typically not supported.
Also use the common parsing code. Use a temporary workaround to parse an
unknown channel layout such as '13c', after a 1 year grace period only '13C'
will work.
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '71a0472114574993df7035f4de9aa007e03817b8':
checkasm: arm: report the first clobbered register in checkasm_checked_call
Also includes 446353ea18, 59aeed93e4, and 37961044c6 to avoid breaking
too much stuff.
Merged-by: Clément Bœsch <u@pkh.me>
* commit '38efff92f1ef81f3de20ff0460ec7b70c253d714':
FATE: add a test for H.264 with two fields per packet
h264: fix decoding multiple fields per packet with slice threads
This merge includes two commits because the FATE test was useful in
order to make proper testing.
The merge gets rid of the now unused:
- SLICE_SINGLETHREAD and SLICE_SKIPED macros
- max_contexts
- "again" label in decode_nal_units()
This commit also includes the fix from d3e4d406b.
Thanks to wm4 and Michael Niedermayer for their testing.
Merged-by: Clément Bœsch <u@pkh.me>
Merged-by: Matthieu Bouron <matthieu.bouron@gmail.com>
This treats the case of no slices like no frames which it basically is.
The field is added to the context as other nal related fields are also there
and passing the has_slices field per *arguments is ugly and not consistent
Found-by: ubitux
Approved-by: ubitux
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This work is sponsored by, and copyright, Google.
Previously all subpartitions except the eob=1 (DC) case ran with
the same runtime:
Cortex A7 A8 A9 A53
vp9_inv_dct_dct_16x16_sub16_add_neon: 3188.1 2435.4 2499.0 1969.0
vp9_inv_dct_dct_32x32_sub32_add_neon: 18531.7 16582.3 14207.6 12000.3
By skipping individual 4x16 or 4x32 pixel slices in the first pass,
we reduce the runtime of these functions like this:
vp9_inv_dct_dct_16x16_sub1_add_neon: 274.6 189.5 211.7 235.8
vp9_inv_dct_dct_16x16_sub2_add_neon: 2064.0 1534.8 1719.4 1248.7
vp9_inv_dct_dct_16x16_sub4_add_neon: 2135.0 1477.2 1736.3 1249.5
vp9_inv_dct_dct_16x16_sub8_add_neon: 2446.7 1828.7 1993.6 1494.7
vp9_inv_dct_dct_16x16_sub12_add_neon: 2832.4 2118.3 2266.5 1735.1
vp9_inv_dct_dct_16x16_sub16_add_neon: 3211.7 2475.3 2523.5 1983.1
vp9_inv_dct_dct_32x32_sub1_add_neon: 756.2 456.7 862.0 553.9
vp9_inv_dct_dct_32x32_sub2_add_neon: 10682.2 8190.4 8539.2 6762.5
vp9_inv_dct_dct_32x32_sub4_add_neon: 10813.5 8014.9 8518.3 6762.8
vp9_inv_dct_dct_32x32_sub8_add_neon: 11859.6 9313.0 9347.4 7514.5
vp9_inv_dct_dct_32x32_sub12_add_neon: 12946.6 10752.4 10192.2 8280.2
vp9_inv_dct_dct_32x32_sub16_add_neon: 14074.6 11946.5 11001.4 9008.6
vp9_inv_dct_dct_32x32_sub20_add_neon: 15269.9 13662.7 11816.1 9762.6
vp9_inv_dct_dct_32x32_sub24_add_neon: 16327.9 14940.1 12626.7 10516.0
vp9_inv_dct_dct_32x32_sub28_add_neon: 17462.7 15776.1 13446.2 11264.7
vp9_inv_dct_dct_32x32_sub32_add_neon: 18575.5 17157.0 14249.3 12015.1
I.e. in general a very minor overhead for the full subpartition case due
to the additional loads and cmps, but a significant speedup for the cases
when we only need to process a small part of the actual input data.
In common VP9 content in a few inspected clips, 70-90% of the non-dc-only
16x16 and 32x32 IDCTs only have nonzero coefficients in the upper left
8x8 or 16x16 subpartitions respectively.
This is cherrypicked from libav commit
9c8bc74c2b.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Additional/Modified FATE tests improve code coverage from 63.7% to 98.1%.
Changed fate-suite sample files:
* filter/hdcd-mix.flac (958K) added. It is a much better test than
filter/hdcd.flac (910K), which is now unused, but can't be removed.
* filter/hdcd-fake20bit.flac (168K) added. It is the first second of
filter/hdcd.flac, with the 16-bit LSB copied into bit 20 of a 24-bit
stream. There isn't an actual non-16-bit HDCD sample available to test.
Signed-off-by: Burt P <pburt0@gmail.com>
