Hardware-accelerated encoding may not support 10-bit encoding. Use
'-require_sw 1' in this case.
Fixes: #7581
Signed-off-by: Rick Kern <kernrj@gmail.com>
The implementation is pretty straight-forward. Most of the existing
NV12 codepaths work regardless of subsampling and are re-used as is.
Where necessary I wrote the slightly different NV24 versions.
Finally, the one thing that confused me for a long time was the
asm specific x86 path that did an explicit exclusion check for NV12.
I replaced that with a semi-planar check and also updated the
equivalent PPC code, which Lauri kindly checked.
These are the 4:4:4 variants of the semi-planar NV12/NV21 formats.
These formats are not used much, so we've never had a reason to add
them until now. VDPAU recently added support HEVC 4:4:4 content
and when you use the OpenGL interop, the returned surfaces are in
NV24 format, so we need the pixel format for media players, even
if there's no direct use within ffmpeg.
Separately, there are apparently webcams that use NV24, but I've
never seen one.
Fixes: signed integer overflow: -2147483648 + -1 cannot be represented in type 'int'
Fixes: 14444/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_H264_fuzzer-5675880333967360
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
perfer avctx->framerate first than use avctx->time_base when setting
the frame rate to encoder. 1/time_base is not the average frame rate
if the frame rate is not constant, so use avctx->framerate if the
value is not zero.
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
perfer avctx->framerate first than use avctx->time_base when setting
the frame rate to encoder. 1/time_base is not the average frame rate
if the frame rate is not constant. In this case, we need to setting
avctx->framerate and avctx->time_base both, but avctx->framerate not
equal to 1/(avctx->time_base).
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
AVCodecContext->bit_rate is int64_t since 7404f3bd
Unbreaks non-interleaved detection of v210 4k avi files, broken since 0eec40b7.
Reported-by: Xavier Càmara, Centre de Conservació i Restauració, Filmoteca de Catalunya
commit cd62f9d557 missing the comment about build
Reviewed-by: Nicolas George <nicolas.george@normalesup.org>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Need to check malloc fail before using it, so adjust the location
in the code.
Reviewed-by: Nicolas George <nicolas.george@normalesup.org>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
After the last few commits, the functions for writing master elements
with CRC-32 elements didn't really make use of the ebml_master
structure any more, so remove these parameters from the functions.
The only things that still need to be kept are the positions of the
level 1 elements that are written preliminarily and updated later.
These positions are stored in the MatroskaMuxContext and
replace the corresponding ebml_master structures.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, a block's relative offset has been reported as the offset
in the log messages output when writing blocks; given that it is
impossible to know the real offset from the beginning of the file at
this point due to the fact that it is not yet known how many bytes will
be used for the containing cluster's length field both the relative
offset in the cluster as well as the offset of the containing cluster
will be reported from now on.
Furthermore, the TrackNumber of the written block has been added to the
log output.
Also, the log message for writing vtt blocks has been brought in line
with the message for normal blocks.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, the length field of most level 1 elements has been written
using eight bytes, although it is known in advance how much space the
content of said elements will take up so that it would be possible to
determine the minimal amount of bytes for the length field. This
commit changes this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes intendation, whitespace, a typo and renames a variable
(dyn_bc->cluster_bc) to make its meaning clearer and to bring
it more in line with the naming of similar variables.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Given that in both the seekable as well as the non-seekable mode dynamic
buffers are used to write level 1 elements and that now no seeks are
used in the seekable case any more, the two modes can be combined; as a
consequence, the non-seekable mode automatically inherits the ability to
write CRC-32 elements.
There are no differences in case the output is seekable; when it is not
and writing CRC-32 elements is disabled, there can still be minor
differences because before this commit, the EBML ID and length field
were counted towards the cluster size limit; now they no longer are.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, the writing process for level 1 elements (those elements
for which CRC-32 elements are written by default) was this in case the
output was seekable: Write the EBML ID, write an "unkown length" EBML
number of the desired length, then write the element into a dynamic
buffer, then write the dynamic buffer (after possible calculation and
writing of the CRC-element), then seek back to the size element and
overwrite the unknown-size element with the real size. The seeking and
overwriting part has been eliminated by not writing the size initially.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
A Matroska EBML ID can only be maximally four bytes long, so make the
variables denoting EBML IDs uint32_t instead of unsigned int to
better reflect this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
All places where end_ebml_master_crc32_preliminary are used already
check for whether the output is seekable, so the check in the function
is redundant.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Since 4e3bdf729a there is no reason any
more to treat the seekable and non-seekable cases separate with regards
to the log message for a new cluster. This effectively reverts
d41aeea8a6.
Also improved the log message: "pts 80dts 0" -> "pts 80, dts 0".
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, the check for whether to write CRC32 elements was always
mkv->write_crc && mkv->mode != MODE_WEBM. This is equivalent to simply
set write_crc to zero in WebM-mode. And this is what this commit does.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until e7ddafd515 the Matroska muxer
wrote a secondary seek head referencing all the clusters. When this
was changed, a (now completely wrong) comment remained and the unique
remaining seek head was still called main_seekhead. This has been
changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now the EBML Header length field has been written with eight
bytes, although the EBML Header is always so small that only one byte
is needed for it. This patch saves seven bytes for every Matroska/Webm
file.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The upper bounds currently used for determining the size of a CuePoint's
length field can be improved somewhat; as a result, a CuePoint
containing three CueTrackPositions will now only need a size field
with one byte length.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The earlier code included the size of the BlockGroup's length field and
the EBML ID in the calculation of the size for the payload and ignored
the size of the duration's length field. This meant that Blockgroups
corresponding to packets with size 2^(7n) - 17 - n - i, i = 0,..., n - 1,
n = 1,..., 8 (i.e. 110, 16364, 16365, 2097130..2097132, ...) were written
with length fields that are unnecessarily long.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
