One of the causes of this bug is that the h264 parser defaults low_delay
to 1, but the h264 codec defaults low_delay to 0. Really Ugly.
After many hours of looking at this, I'm still not sure how has_b_frames
is *intended* to behave, but to me the implementation appears way more
complicated than it ought to be.
My patch relies on the encoder to set an optional field in the SPS. This
works for libx264 streams, but I'm not sure that all h264 encoders will
set it.
* commit '85770f2a2651497861ed938efcd0df3696ff5e45':
AVOptions: make default_val a union, as proposed in AVOption2.
Move ff_dynarray_add to lavu and make it public.
lavf: remove duplicate assignment in avformat_alloc_context.
lavf: use designated initializers for AVClasses.
options: simplify av_find_opt by using av_next_option.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
I still don't fully understand the cause but the difference between
the samples that trigger the bug and the samples that don't is
that the former uses delay frames and the later uses drop frames
as placeholders for the packed frame. So, if we see the one type
of frame, we can assume the bug will or won't be present.
Right now, I'm detecting the frame types by size, which may not be
safe in general, but given the specific codec and file type, I
expect any scenario where we encounter these frames where they
aren't being used for b-frame packing won't care one way or
another whether the work around is in effect or not.
Signed-off-by: Philip Langdale <philipl@overt.org>
* qatar/master:
Duplicate AMV: disable DR1 and don't override EMU_EDGE
Duplicate lavf: inspect more frames for fps when container time base is coarse
Wrong and we have correct fix: Fix races in default av_log handler
vorbis: Replace sized int_fast integer types with plain int/unsigned.
Remove disabled non-optimized code variants.
NO bswap.h: Remove disabled code.
Remove some disabled printf debug cruft.
Replace more disabled printf() calls by av_dlog().
NO tests: Remove disabled code.
NO Replace some commented-out debug printf() / av_log() messages with av_dlog().
vorbisdec: Replace some sizeof(type) by sizeof(*variable).
NO vf_fieldorder: Replace FFmpeg by Libav in license boilerplate.
Conflicts:
libavcodec/h264.c
libavcodec/vorbisdec.c
libavutil/log.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This works around a possibly exploitable crash.
Appearently, vlc can be exploited with a malicous file. This should get
reverted as soon as a proper fix is found.
Reported-at: Thu, 21 Apr 2011 14:38:25 +0000
Reported-by: Dominic Chell <Dominic.Chell@ngssecure.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 89f903b3d5)
(cherry picked from commit 9b919571e5)
int/unsigned is the natural memory access type for CPUs, using sized types
for temporary variables, counters and similar just increases code size and
can possibly cause a slowdown.
Make av_get_profile_name() return NULL if no profile is detected.
Fix trac issue #130, fix crash reading file tek3.m2v.
(cherry picked from commit e5d80c7b2d)
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
vorbisdec: Rename silly "class_" variable to plain "class".
simple_idct_alpha: Drop some useless casts.
Simplify av_log_missing_feature().
ac3enc: remove check for mismatching channels and channel_layout
If AVCodecContext.channels is 0 and AVCodecContext.channel_layout is non-zero, set channels based on channel_layout.
If AVCodecContext.channel_layout and AVCodecContext.channels are both non-zero, check to make sure they do not contradict eachother.
cosmetics: indentation
Check AVCodec.supported_samplerates and AVCodec.channel_layouts in avcodec_open().
aacdec: remove sf_scale and sf_offset.
aacdec: use a scale of 2 in the LTP MDCT rather than doubling the coefficient table values from the spec.
Define POW_SF2_ZERO in aac.h and use for ff_aac_pow2sf_tabp[] offsets instead of hardcoding 200 everywhere.
Large intensity stereo and PNS indices are legal. Clip them instead of erroring out. A magnitude of 100 corresponds to 2^25 so the will most likely result in clipped output anyway.
qpeg: use reget_buffer() in decode_frame()
ultimotion: use reget_buffer() in ulti_decode_frame()
smacker: remove unnecessary call to avctx->release_buffer in decode_frame()
avparser: don't av_malloc(0).
Merged-by: Michael Niedermayer <michaelni@gmx.at>
avcodec_open().
If the encoder has a channel_layouts list and AVCodecContext.channel_layout
is 0, then only print a warning and let the encoder decide how to handle it.
Instead, scalefactors are adjusted by the offset amount, removing the need
for sf_scale, and the MDCT scales are adjusted to compensate for the higher
scalefactors. Floating-point output will be handled by modifying the MDCT
scales.
erroring out. A magnitude of 100 corresponds to 2^25 so the will most
likely result in clipped output anyway.
None of the conformance streams fall in the range that need to be clipped.
Decoder relies on previous frame data, so use reget_buffer().
This also set frame->reference to 3, as the frame will be requested
unmodified later so it shouldn't be modified by the application.
Fix playback of file Clock.avi.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The release_buffer was cleaning the provided frame, thus causing the
successive call to avctx->reget_buffer() to allocate a new frame. In
case the returned frame was not the same one previously returned but a
new one with different data, it resulted in artifacts.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Also remove unnecessary call to avctx->release_buffer(). reget_buffer
is required since apparently the codec needs to be feeded with the
previous frame data.
Releasing the frame and using get_buffer was working only in the case
get_buffer() was returning the old frame data, and resulting in
playback artifacts otherwise.
Fix trac issue #85.
Store palette data in the codec context, do not assume that the frame
allocated the first time by avctx->get_buffer will be returned again.
This requires to store the palette which comes with the first frame in
the context, and copy it to the following frames.
Fix trac issue #84.
Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
Also deprecate av_get_pict_type_char() in favor of
av_get_picture_type_char().
The new enum and av_get_picture_type_char() are defined in libavutil.
This allows the use in libavfilter without the need to link against
libavcodec.
Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
graphparser: add a NULL check on the argument passed to strstr
setdar: prefer "sar" over "par" in log info message
fade: fix draw_slice() check on fade->factor value
fade: make draw_slice() chroma check against planes 1 and 2
win32: include the correct header in cmdutils.c
ac3: fix memleak in fixed-point encoder
flashsv: Return more meaningful error values.
flashsv: Employ explicit AVCodec struct initializers.
read AVI palette from the end of extradata
cosmetics: K&R coding style and more whitespace for Flash Screen Video
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is required for setting up the filterchain, as it requires the
pixel format to be set, which is usually done when probing the file
with av_find_stream_info().
Fix trac issue #83.
Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
* qatar/master:
vorbisdec: Employ proper printf format specifiers for uint_fast32_t.
applehttp: Don't export variant_bitrate if it isn't known
crypto: Use av_freep instead of av_free
configure: Add missing libm library dependencies to .pc files.
oggdec: reindent after 8f3eebd6
configure: Add missing libavutil inter-library dependencies to .pc files.
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
libavcodec/vorbisdec.c:543: warning: format ‘%d’ expects type ‘int’, but argument 4 has type ‘uint_fast32_t’
libavcodec/vorbisdec.c:543: warning: format ‘%d’ expects type ‘int’, but argument 5 has type ‘uint_fast32_t’
The CrystalHD hardware can do scaling, which is particularly
desirable when dealing with some high resolution clips that take
so long to decode and copy out that they end up playing back
slower than realtime. By using scaling, we can make the output
frames smaller and reduce the copy out time.
This option takes the desired horizontal width in pixels, and
the hardware will do an aspect-scale. Upscaling is not supported
and the hardware will simply ignore any request to do so.
Signed-off-by: Philip Langdale <philipl@overt.org>
* qatar/master:
Handle unicode file names on windows
rtp: Rename the open/close functions to alloc/free
Lowercase all ff* program names.
Refer to ff* tools by their lowercase names.
NOT Pulled Replace more FFmpeg instances by Libav or ffmpeg.
Replace `` by $() syntax in shell scripts.
patcheck: Allow overiding grep program(s) through environment variables.
NOT Pulled Remove stray libavcore and _g binary references.
vorbis: Rename decoder/encoder files to follow general file naming scheme.
aacenc: Fix whitespace after last commit.
cook: Fix small typo in av_log_ask_for_sample message.
aacenc: Finish 3GPP psymodel analysis for non mid/side cases.
Remove RDFT dependency from AAC decoder.
Add some debug log messages to AAC extradata
Fix mov debug (u)int64_t format strings.
bswap: use native types for av_bwap16().
doc: FLV muxing is supported.
applehttp: Handle AES-128 encrypted streams
Add a protocol handler for AES CBC decryption with PKCS7 padding
doc: Mention that DragonFly BSD requires __BSD_VISIBLE set
Conflicts:
ffplay.c
ffprobe.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add a check in flic_decode_frame_8BPP(), in case chunk_size is >
frame_size issue a warning and resize chunk_size to frame_size, in
order to avoid out-of-buffer reads.
Fix roundup issue #2520, trac issue #69.
Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
There is still are still a few sections missing relating to TNS (not present)
and mid/side (contains other bugs).
Overall this improves quality, and vastly improves rate-control.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
Use av_log_ask_for_sample() to request samples from users.
Make av_log_ask_for_sample() accept a variable number of arguments.
vqavideo: We no longer need to ask for version 1 samples.
aacdec: indentation cosmetics
Conflicts:
libavcodec/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
APIChanges: document git revision for CODEC_CAP_SLICE_THREADS addition.
Introduce slice threads flag.
FATE: allow forcing thread-type when doing threaded fate runs.
Use av_log_ask_for_sample() where appropriate.
error: sort, pack, and align error code and string definitions
The stabilization period after version bumps should be one month, not one week.
applehttp: Expose the stream bitrate via metadata
doc: Add some initial docs on the applehttp demuxer
Provide a fallback version of the libm function trunc
libavdevice: Define _XOPEN_SOURCE for usleep
lavc: provide deprecated avcodec_thread_init until next major version
lavc: provide the opt.h header until the next bump
error: change AVERROR_EOF value
error: remove AVERROR_NUMEXPECTED
error: add error code AVERROR_OPTION_NOT_FOUND, and use it in opt.c
Conflicts:
libavcodec/h264.c
libavutil/error.c
libavutil/error.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (37 commits)
In avcodec_open(), set return code to an error value only when an error occurs instead of unconditionally at the start of the function.
lavc: remove reference to opt.h from Makefile.
prefer avio_check() over url_exist()
avio: remove AVIO_* access symbols in favor of new AVIO_FLAG_* symbols
lavu: remove misc disabled cruft
lavu: remove FF_API_OLD_IMAGE_NAMES cruft
NOT PULLED lavu: remove FF_API_OLD_EVAL_NAMES cruft
lavc: remove misc disabled cruft.
lavc: remove the FF_API_INOFFICIAL cruft.
lavc: remove the FF_API_SET_STRING_OLD cruft.
lavc: remove the FF_API_USE_LPC cruft.
lavc: remove the FF_API_SUBTITLE_OLD cruft.
lavc: remove the FF_API_VIDEO_OLD cruft.
lavc: remove the FF_API_AUDIO_OLD cruft.
lavc: remove the FF_API_OPT_SHOW cruft.
lavc: remove the FF_API_MM_FLAGS cruft.
lavf: remove misc disabled cruft.
lavf: remove FF_API_INDEX_BUILT cruft
lavf: remove FF_API_URL_CLASS cruft.
lavf: remove FF_API_SYMVER cruft
...
Merged-by: Michael Niedermayer <michaelni@gmx.at>
instead of unconditionally at the start of the function.
This fixes a bug where a successful call to ff_thread_init() masks errors that
occur after that point in the function. It also makes future bugs like this
less likely since the error code is now set near to the point in the code
where the error is found.
* commit 'f0a41afd8a37ebe972436fabfa3d289178bbd83b':
Not pulled: Replace mplayerhq.hu URLs by libav.org.
asfdec: Remove dead code from asf_read_close().
ptx: Use av_log_ask_for_sample() where appropriate.
Conflicts:
libavcodec/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* ffmpeg-mt/master:
Release unused pictures even when not calling ff_h264_frame_start()
h264: Fix decoding race condition with PAFF
h264: cosmetic whitespace change
Duplicate Fix REBASE_PICTURE with h.264
Not pulled Update test scripts to use ffmpeg instead of ffmpeg_g
Duplicate Fix ffmpeg-mt fixme in h264
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ac3dec: fix processing of delta bit allocation information.
vc1: fix fate-vc1 after previous commit.
wmv3dec: fix playback of complex WMV3 files using simple_idct.
make av_dup_packet() more cautious on allocation failures
make containers pass palette change in AVPacket
introduce side information for AVPacket
Politic commits that have not been pulled:
Update regtest checksums after revision 6001dad.
Replace more FFmpeg references by Libav.
Replace references to ffmpeg-devel with libav-devel; fix roundup URL.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
PROFILE_ADVANCED doesn't set res_fasttx, so make that a special case
in the condition that decides which IDCT to use (and whether to read
coefficients transposed or not).
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
There is no need to have 2 encoders, the input sample format can,does and should choose which is used
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
IDCT coefficients are read transposed, but simple_idct does not expect
this. Therefore, only do tranposed coefficient reading if we're not
using simple_idct.
Fixes http://forum.videolan.org/viewtopic.php?f=14&t=89651
I was using the wrong value to track the position of the parser in the
stream. For an error-free stream, the size of the frame and number of
bytes consumed will be the same, but in an error situation they can
diverge.
Signed-off-by: Philip Langdale <philipl@overt.org>
The warning is printed with loglevel error because the output
stream is known to be broken.
Also warn if no channel layout was provided for multichannel input.
* commit 'a3a0af4fb1237bed0af75868073f9a63db8b1864':
avutil: make aes and sha api public
handle malloc failures in ff_get_wav_header
add xWMA demuxer
mpegts: force the default timebase
libavcodec: Bump micro after adding the dtx AVOptions
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (32 commits)
libopencore-amr, libvo-amrwbenc: Allow enabling DTX via private AVOptions
libopencore-amr, libvo-amrwbenc: Only check the bitrate when changed
libopencore-amr, libvo-amrwbenc: Find the closest matching bitrate
libvo-*: Fix up the long codec names
libavcodec: Mark AVCodec->priv_class const
swscale: Factorize FAST_BGR2YV12 definition.
libvo-aacenc: Only produce extradata if the global header flag is set
lavf: postpone removal of public metadata conversion API
lavc: postpone removal of request_channels
lavc: postpone removal of audioconvert and sample_fmt wrappers
lavf: postpone removal of deprecated avio functions
libopencore-amr: Cosmetics: Rewrap and align
libopencore-amr, libvo-amrbwenc: Rename variables and functions
libopencore-amr: Convert commented out debug logging into av_dlog
libopencore-amr: Remove an unused state variable
libvo-amrwbenc: Don't explicitly store bitrate modes in the bitrate table
libopencore-amr: Remove a useless local variable
libopencore-amr, libvo-amrwbenc: Make the bitrate/mode mapping array static const
libopencore-amr, libvo-amrwbenc: Return proper error codes in most places
libopencore-amr: Don't print carriage returns in log messages
...
Conflicts:
doc/developer.texi
libavcodec/avcodec.h
libavcodec/libvo-aacenc.c
libavcodec/libvo-amrwbenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
DTX, discontinuous transmission, allows emitting frames with
comfort noise when no voice is detected in the input audio.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also rename the incorrectly named enc_bitrate to enc_mode, use the
enc_bitrate variable for storing the last chosen bitrate.
This avoids continuous warning log messages if not using an
exactly matching bitrate, while still allowing changing bitrate
at any point.
Signed-off-by: Martin Storsjö <martin@martin.st>
Dynamically print the supported bitrates from the local table,
instead of using a hardcoded log message.
Signed-off-by: Martin Storsjö <martin@martin.st>
Include VisualOn to clarify the codec name, but remove the
actual library name from the user-friendly description.
Also mention Android, to clarify which VisualOn implementation
this refers to, since they do sell other variants of the same
code, too.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids warnings of this kind, everywhere priv_class
is initialized:
warning: initialization discards qualifiers from pointer target type
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
Partially merged:flvdec: Allow parsing keyframes metadata without seeking in most cases
Error out if vaapi is not found
avio: undeprecate av_url_read_fseek/fpause under nicer names
libvo-*: Don't use deprecated sample format names and enum names
DUPLICATE flvdec: Fix support for flvtool2 "keyframes based" generated index
DUPLICATE libavcodec: Use "const enum AVSampleFormat[]" in AVCodec initialization
Fix the conversion of AV_SAMPLE_FMT_FLT and _DBL to AV_SAMPLE_FMT_S32.
Convert some undefined 1<<31 shifts into 1U<<31.
Conflicts:
configure
libavcodec/libvo-aacenc.c
libavcodec/libvo-amrwbenc.c
libavformat/flvdec.c
Marged-by: Michael Niedermayer <michaelni@gmx.at>
According to ISO 9899:1999 S 6.5.7/4:
The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated bits
are filled with zeros. If E1 has an unsigned type, the value of the
result is E1× 2^E2, reduced modulo one more than the maximum value
representable in the result type. If E1 has a signed type and
nonnegative value, and E1× 2^E2 is representable in the result type, then
that is the resulting value; otherwise, the behavior is undefined.
via the equivalent AVCodecContext::crf modifying the range allowed by
options.c (0-51 -> 0-63)
update configure check to require libvpx 0.9.6 (Bali)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Not pulled due to wrong author, according to carl: Add unconditional return statement to yuva420_rgb32_MMX() / yuva420_bgr32_MMX().
Fix compilation of timefilter test program.
Add support for AMR-WB encoding via libvo-amrwbenc
Add an AAC encoder by using the libvo-aacenc library
g722: Return 8 bits per sample for g722 in av_get_bits_per_sample
Conflicts:
Changelog
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Call this new function before decode() to replace the custom and
inconsistant initialization in various decoders.
This function is equivalent to avcodec_get_frame_defaults() for AVFrame.
Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
This fixes a failing assert in ff_raw_read_header (in
fate-g722dec-1), where bits_per_coded_sample is set using this
function and is required to have a positive value.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
avio: add more documentation for AVIOContext.
Parse sprite data for WMVP and WVP2, and decode sprites for the latter
Replace outdated info on the FAQ
Redefine sameq
pad: fix example explanation
gradfun: add notice from the MPlayer manual
eval: add support for trunc, ceil, and floor functions
documentation: add setdar and setsar description to filters.texi
avio: document some members of AVIOContext.
avio: document avio_close().
avio: cosmetics, vertically align comments.
avio: cosmetics, group the reading functions.
avio: cosmetics, merge all the FF_API_OLD_AVIO blocks.
avio: cosmetics, move AVIOContext to start of the file.
avio: update file header.
os: fix OpenBSD/PowerPC compilation
pixfmt: add PIX_FMT_BGR48LE and PIX_FMT_BGR48BE
oggdec: fix demuxing chained audio streams
fix typo
Conflicts:
doc/filters.texi
libavformat/avio.h
libavutil/pixfmt.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch lets e.g. dsputil_init chose dsp functions with respect to
the bit depth to decode. The naming scheme of bit depth dependent
functions is <base name>_<bit depth>[_<prefix>] (i.e. the old
clear_blocks_c is now named clear_blocks_8_c).
Note: Some of the functions for high bit depth is not dependent on the
bit depth, but only on the pixel size. This leaves some room for
optimizing binary size.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In high bit depth, the QP values may now be up to (51 + 6*(bit_depth-8)).
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In high bit depth the pixels will not be stored in uint8_t like in the
normal case, but in uint16_t. The pixel size is thus 1 in normal bit
depth and 2 in high bit depth.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The functions moved are used when decoding h264.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Unfortunately the output buffer size check assumes that the
input buffer is never over-consumed, thus this actually
also allowed to write outside the output buffer if "lucky".
AS libavcodec/arm/ac3dsp_armv6.o
ffmpeg-src/libavcodec/arm/ac3dsp_armv6.S: Assembler messages:
ffmpeg-src/libavcodec/arm/ac3dsp_armv6.S:40: Error: selected processor
does not support `movw r8,#0x1fe0'
make[1]: *** [libavcodec/arm/ac3dsp_armv6.o] Error 1
MOVW is ARMv7 way to load constant:
* movw, or move wide, will move a 16-bit constant into a register,
implicitly zeroing the top 16 bits of the target register.
* movt, or move top, will move a 16-bit constant into the top half
of a given register without altering the bottom 16 bits
To load 32 bit constant, movw lower16; movt upper16; is better than
ldr if available, because:
While this approach takes two instructions, it does not require any
extra space to store the constant so both the movw/movt method and the
ldr method will end up using the same amount of memory. Memory
bandwidth is precious in and the movw/movt approach avoids an extra
read on the data side, not to mention the read could have missed the
cache.
But here it is armv6 optimization, so that we have to use ldr.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The thread_type API allows you to request only FF_THREAD_FRAME (instead of
FRAME | SLICE), but it was being ignored.
We don't implement both of them at the same time, so there isn't an effect
on current codecs, except that you can request no kinds of threading now
(a bit useless).
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
As previously discussed, the CrystalHD hardware returns exceptionally
useless information about interlaced h.264 content - to the extent
that it's not possible to distinguish most MBAFF and PAFF content until
it's too late.
In an attempt to compensate for this, I'm introducing two mechanisms:
1) Peeking at the picture number of the next picture
The hardware provides a capability to peek the next picture number. If
it is the same as the current picture number, then we are clearly dealing
with two fields and not a frame or fieldpair.
If this always worked, it would be all we need, but it's not guaranteed
to work. Sometimes, the next picture may not be decoded sufficiently
for the number to be known; alternately, a corruption in the stream may
cause the hardware to refuse to return the number even if the next
intact frame is decoded. In either case, the query will return 0.
If we are unable to peek the next picture number, we assume that the
picture is a frame/fieldpair and return it accordingly. If that turns
out to be incorrect, we discard the second field, and the user has
to live with the glitch. In testing, false detection can occur for
the first couple of seconds, and then the pipeline stabalizes and
we get correct detection.
2) Use the h264_parser to detect when individual input fields have
been combined into an output fieldpair.
I have multiple PAFF samples where this behaviour is detected. The
peeking mechanism described above will correctly detect that the
output is a fieldpair, but we need to know what the input type was
to ensure pipeline stability (only return one output frame per input
frame).
If we find ourselves with an output fieldpair, yet the input picture
type was a field, as reported by the parser, then we are dealing with
this case, and can make sure not to return anything on the next
decode() call.
Taken together, these allow us to remove the hard-coded hacks for
different h.264 types, and we can clearly describe the conditions
under which we can trust the hardware's claim that content is
interlaced.
Signed-off-by: Philip Langdale <philipl@overt.org>
Now that we know the type of the input picture, we have to bring
that information to the output picture to help identify its type.
We do this by adding a field to the opaque_list node.
Signed-off-by: Philip Langdale <philipl@overt.org>
As the hardware is unreliable, we will have to use the h.264 parser
to identify whether an input picture is a field or a frame. This
change loads the parser and extracts the picture type.
Signed-off-by: Philip Langdale <philipl@overt.org>
In preparation for adding additional fields to the node, return
the node instead of the pts value. This requires the caller to
free the node.
Signed-off-by: Philip Langdale <philipl@overt.org>
I found another MBAFF sample where the input:output pattern is
the same as mpeg2 and vc1 (fieldpair input, individual field output).
While I'm not sure how you can output individual fields from MBAFF,
if I apply the mpeg2/vc1 handling to this file, it plays correctly.
So, this changes the detection algorithm to handle the known cases.
Whitespace will be fixed in a separate change.
Signed-off-by: Philip Langdale <philipl@overt.org>
* ffmpeg-mt/master:
DUPLICATE mingw32 compilation after 'unbreak avcodec_thread_init'
pthread: validate_thread_parameters() ignored slice-threading being intentionally off
DUPLICATE Remove unnecessary parameter from ff_thread_init() and fix behavior
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
proto: include os_support.h in network.h
matroskaenc: don't write an empty Cues element.
lavc: add a FF_API_REQUEST_CHANNELS deprecation macro
avio: move extern url_interrupt_cb declaration from avio.h to url.h
avio: make av_register_protocol2 internal.
avio: avio_ prefix for url_set_interrupt_cb.
avio: AVIO_ prefixes for URL_ open flags.
proto: introduce listen option in tcp
doc: clarify configure features
proto: factor ff_network_wait_fd and use it on udp
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Fix parser: mark av_parser_parse() for removal on next major bump
swscale: postpone sws_getContext removal until next major bump.
fate: add AAC LATM test
mmst: get rid of deprecated AVERRORs
lxfdec: use AVERROR(ENOMEM) instead of deprecated AVERROR_NOMEM.
Reemove remaining uses of deprecated AVERROR_NOTSUPP.
REIMPLEMENTED in 2 lines of code: lavf: if id3v2 tag is present and all else fails, guess by file extension
Conflicts:
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
psymodel: extend API to include PE and bit allocation.
avio: always compile dyn_buf functions
Remove unnecessary parameter from ff_thread_init() and fix behavior
Revert "aac_latm_dec: use aac context and aac m4ac"
configure: tell user if libva is enabled like the rest of external libs.
Add silence support for AV_SAMPLE_FMT_U8.
avio: make URL_PROTOCOL_FLAG_NESTED_SCHEME internal
avio: deprecate av_url_read_seek
avio: deprecate av_url_read_pause
ac3enc: NEON optimised extract_exponents
Conflicts:
libavcodec/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
CONFIG_VDPAU is the condition on which ff_vdpau_mpeg_picture_complete
is compiled in, so it is more appropriate, particularly since the
separate VDPAU decoder should be removed in the longer term.
thread_count passed to ff_thread_init() is only used to set AVCodecContext.
thread_count, and can be removed. Instead move it to the legacy implementation
of avcodec_thread_init().
This also fixes the problem that calling avcodec_thread_init() with pthreads
enabled did not set it since ff1efc524c.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Currently, the parser is buggy and only processes the stream extradata
when the flag is set. This fixes it to actually inspect the frames.
Whitespce will be fixed in a separate change.
Signed-off-by: Philip Langdale <philipl@overt.org>
* qatar/master: (22 commits)
ac3enc: move extract_exponents inner loop to ac3dsp
avio: deprecate url_get_filename().
avio: deprecate url_max_packet_size().
avio: make url_get_file_handle() internal.
avio: make url_filesize() internal.
avio: make url_close() internal.
avio: make url_seek() internal.
avio: cosmetics, move AVSEEK_SIZE/FORCE declarations together
avio: make url_write() internal.
avio: make url_read_complete() internal.
avio: make url_read() internal.
avio: make url_open() internal.
avio: make url_connect internal.
avio: make url_alloc internal.
applehttp: Merge two for loops
applehttp: Restructure the demuxer to use a custom AVIOContext
applehttp: Move finished and target_duration to the variant struct
aacenc: reduce the number of loop index variables
avio: deprecate url_open_protocol
avio: deprecate url_poll and URLPollEntry
...
Conflicts:
libavformat/applehttp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The pulldown flags should be communicated to the client of the libavcodec library. Not doing so causes jerky playback with pulldown content. Note that this change requires the patch previously provided here: http://ffmpeg.org/pipermail/ffmpeg-devel/2011-April/110314.html
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The attached patch fixes the jerky playback of VC-1 content with pulldown. The pulldown flags were incorrectly set. They must be correct in order to display the frames with the correct timing as mentioned in the specifications: "SMPTE 421M: VC-1 Compressed Video Bitstream Format and Decoding Process". More precisely the following tables:
Table 20: Progressive P picture layer bitstream for Advanced Profile
Table 22: Progressive B picture layer bitstream for Advanced Profile
Table 23: Progressive Skipped picture layer bitstream for Advanced Profile
Table 82: Interlaced Frame I and BI picture layer bitstream for Advanced Profile
Table 83: Interlaced Frame P picture layer bitstream for Advanced Profile
Table 84: Interlaced Frame B picture layer bitstream for Advanced Profile
Table 85: Picture Layer bitstream for Field 1 of Interlace Field Picture for Advanced Profile
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: fix partial run when no samples path is specified
ARM: NEON fixed-point forward MDCT
ARM: NEON fixed-point FFT
lavf: bump minor version and add an APIChanges entry for avio changes
avio: simplify url_open_dyn_buf_internal by using avio_alloc_context()
avio: make url_fdopen internal.
avio: make url_open_dyn_packet_buf internal.
avio: avio_ prefix for url_close_dyn_buf
avio: avio_ prefix for url_open_dyn_buf
avio: introduce an AVIOContext.seekable field
ac3enc: use generic fixed-point mdct
lavfi: add fade filter
Change yadif to not use out of picture lines.
lavc: deprecate AVCodecContext.antialias_algo
lavc: mark mb_qmin/mb_qmax for removal on next major bump.
Conflicts:
doc/filters.texi
libavcodec/ac3enc_fixed.h
libavcodec/ac3enc_float.h
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/vf_fade.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the AC3 encoder use the shared fixed-point MDCT rather
than its own implementation. The checksum changes are due to
different rounding in the MDCT.
Signed-off-by: Mans Rullgard <mans@mansr.com>
commit c0ec9918b0
Author: Måns Rullgård <mans@mansr.com>
Date: Tue Aug 24 17:47:05 2010 +0000
Remove global mm_flags variable
Originally committed as revision 24909 to svn://svn.ffmpeg.org/ffmpeg/trunk
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Fixed-point MDCT with 32-bit unscaled output
lavc: deprecate rate_emu
lavc: mark hurry_up for removal on next major bump
parser: mark av_parser_parse() for removal on next major bump
lavc: add missing audioconvert includes
jvdec: don't use deprecated CODEC_TYPE_*/PKT_FLAG_KEY
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ac3enc: ARM optimised ac3_compute_matissa_size
ac3: armv6 optimised bit_alloc_calc_bap
fate: simplify fft test rules
avio: document avio_alloc_context.
lavf: make compute_chapters_end less picky.
sierravmd: fix Indeo3 videos
FFT: simplify fft8()
fate: add fixed-point fft/mdct tests
Fixed-point support in fft-test
ape: check that number of seektable entries is equal to number of frames
Merged-by: Michael Niedermayer <michaelni@gmx.at>
TrueHD supports more channels than FFmpeg, so a valid sample
could set the channel layout to a value that represents less
channels than the sample actually consists of.
* newdev/master:
mpegts: propagate avio EOF in read_packet()
configure: Initial support for --target-os=symbian
Fixed-point FFT and MDCT
Include dependencies for test programs
ac3enc: simplify sym_quant()
flvdec: read index stored in the 'keyframes' tag.
mov: Add support for zero-sized stsc runs.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These expressions are equivalent since levels is always odd, and
overflow is impossible due to the constraints set by the assert().
Signed-off-by: Mans Rullgard <mans@mansr.com>
* newdev/master:
rtsp: Use GET_PARAMETER for keep-alive for generic RTSP servers
mlp_parse.c: set AVCodecContext channel_layout
APIChanges: mark the place where 0.6 was branched.
avio: make get_checksum() internal.
avio: move ff_crc04C11DB7_update() from avio.h -> avio_internal.h
avio: make init_checksum() internal.
NOT MERGED Add MxPEG decoder
NOT MERGED Add support for picture_ptr field in MJpegDecodeContext
NOT MERGED Move MJPEG's input buffer preprocessing in separate public function
NOT MERGED Support reference picture defined by bitmask in MJPEG's SOS decoder
sndio bug fix
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master:
ac3enc: move compute_mantissa_size() to ac3dsp
ac3enc: move mant*_cnt and qmant*_ptr out of AC3EncodeContext
Remove support for stripping executables
ac3enc: NEON optimised float_to_fixed24
ac3: move ff_ac3_bit_alloc_calc_bap to ac3dsp
dfa: protect pointer range checks against overflows.
Duplicate: mimic: implement multithreading.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* ffmpeg-mt/master:
Update todo. More items appeared...
Fix mdec
Duplicate: id3v1: change filesize to int64_t.
Duplicate: id3v1: Seek back to old position after reading.
Conflicts:
libavcodec/mpegvideo.c
libavcodec/snow.c
libavformat/id3v1.c
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
These fields are only used in quantize_mantissas() and reset
on each call, no need to store them in the main context.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* newdev/master:
ac3enc: avoid memcpy() of exponents and baps in EXP_REUSE case by using exponent reference blocks.
Chronomaster DFA decoder
DUPLICATE: framebuffer device demuxer
NOT MERGED: cosmetics: fix dashed line length after 070c5d0
http: header field names are case insensitive
Conflicts:
LICENSE
README
doc/indevs.texi
libavdevice/fbdev.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master:
ac3enc: Add codec-specific options for writing AC-3 metadata.
NOT MERGED: Remove arrozcru URL from documentation
sndio support for playback and record
Conflicts:
doc/faq.texi
doc/general.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master:
dsputil: allow to skip drawing of top/bottom edges.
Split fate-psx-str-v3 into a video-only and audio-only test.
Conflicts:
libavcodec/dsputil.c
libavcodec/mpegvideo.c
libavcodec/snow.c
libavcodec/x86/dsputil_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
As previously discussed, the CrystalHD hardware treats some PAFF
clips different from others; even when input fields are always in
separate packets, the hardware might return a single fieldpair for
one clip and individual fields for another.
Given the bogus flags set by the hardware, it is impossible to
distinguish these two cases without knowing about the current
picture and the next one. The hardware can usually provide the
picture number of the next picture and when that is available,
we can detect the two cases.
When it is not available, we have to guess - and find out later
if we were right or wrong.
With this change, clips will play correctly unless they are PAFF
where individual fields are returned *and* no next picture number
is available. Generally speaking, the incorrect cases arise in
the first couple of seconds of a clip as the delay calibration takes
place. Once that's set, things work fine.
As previously discussed, the CrystalHD hardware returns exceptionally
useless information about interlaced h.264 content - to the extent
that it's not possible to distinguish MBAFF and PAFF content until
it's too late.
This change introduces use of the h264_parser to help bridge the
gap; it can indicate if the input data is PAFF fields or not.
With this clarity, some of heuristics can be removed from the code,
making this less convoluted.
Finally, I found an MBAFF clip that acts like non h.264 content so
I had to make allowances for that.
Note that I still cannot distinguish between two forms of PAFF,
where the hardware either returns individual fields or a field-pair.
It's not clear that there's even a spec relevant difference between
the two forms, as opposed to hardware ideosyncracies.
* newdev/master:
mov: set audio service type for AC-3 from bitstream mode in the 'dac3' atom.
Get audio_service_type for AC-3 based on bitstream mode in the AC-3 parser and decoder, and vice-versa for the AC-3 encoder.
Use audio_service_type to set stream disposition.
Add APIchanges entry for audio_service_type.
Add audio_service_type field to AVCodecContext for encoding and reporting of the service type in the audio bitstream.
configure: in check_ld, place new -l flags before existing ones
support @heading, @subheading, @subsubheading, and @subsubsection in texi2pod.pl
doc: update build system documentation
aacenc: indentation
aacenc: fix the side calculation in search_for_ms
vp8.c: rename EDGE_* to VP8_EDGE_*.
Conflicts:
doc/APIchanges
libavcodec/avcodec.h
libavcodec/version.h
libavcodec/vp8.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
On Blu-ray colors are stored in the order YCrCb (and not YCbCr) as mentioned in the specifications:
see System Description Blu-ray Disc Read-Only Format, 9.14.4.2.2.1 Palette Definition Segment
When decoding a Blu-ray subtitle, the colors were incorrectly set.
On DVD and HD-DVD colors are stored in the order YCrCb (and not YCbCr) as mentioned in the specifications:
see DVD Specifications for Read-Only Disc / Part 3, 4.3 Program Chain Information (7) PGC_SP_PLT
see DVD Specifications for High Definition Disc, 5.2 Navigation for Standard Content (11) PGC_SDSP_PLT
see DVD Specifications for High Definition Disc, 5.2 Navigation for Standard Content (12) PGC_HDSP_PLT
see DVD Specifications for High Definition Disc, 5.5 Presentation Data (4) SET_COLOR2
When decoding a DVD or HD-DVD subtitle, the colors were incorrectly set.
* newdev/master:
matroskadec: set default duration for simple block
When building for MinGW32 disable strict ANSI compliancy.
ARM: fix ff_apply_window_int16_neon() prototype
configure: check for --as-needed support early
ARM: NEON optimised apply_window_int16()
ac3enc: NEON optimised shift functions
ac3enc: NEON optimised ac3_max_msb_abs_int16 and ac3_exponent_min
mpeg12.c: fix slice threading for mpeg2 field picture mode.
ffmetadec.c: fix compiler warnings.
configure: Don't explicitly disable ffplay or in/outdevices on dos
configure: Remove the explicit disabling of ffserver
configure: Add fork as a dependency to ffserver
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master:
avio: make udp_set_remote_url/get_local_port internal.
asfdec: also subtract preroll when reading simple index object
matroskaenc: remove a variable that's unused after bc17bd9.
avio: cosmetics - nicer vertical alignment.
Remove unnecessary icc version checks
Disable 'attribute "foo" ignored' warnings from icc
rtsp: Don't use a locale dependent format string
Add xd55 codec tag for XDCAM HD422 720p25 CBR files.
configure: get libavcodec version from new version.h header
lavc: move the version macros to a new installed header.
matroskaenc: simplify get_aac_sample_rates by using ff_mpeg4audio_get_config
Do not use format string "%0.3f" for RTSP Range field.
Add apply_window_int16() to DSPContext with x86-optimized versions and use it in the ac3_fixed encoder.
Document usage of import libraries created by dlltool
configure: Set the correct lib target for arm/wince dlltool
fate: simplify regression-funcs.sh
fate: add support for multithread testing
Conflicts:
libavformat/rtspdec.c
libavutil/attributes.h
libavutil/internal.h
libavutil/mem.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master: (33 commits)
Fix an infinite loop when RoQ encoded generated a frame with a size greater than the maximum valid size.
Add kbdwin.o to AC3 decoder
Detect byte-swapped AC-3 and support decoding it directly.
cosmetics: indentation
Always copy input data for AC3 decoder.
ac3enc: make sym_quant() branch-free
cosmetics: indentation
Add a CPU flag for the Atom processor.
id3v2: skip broken tags with invalid size
id3v2: don't explicitly skip padding
Make sure kbhit() is in conio.h
fate: update wmv8-drm reference
vc1: make P-frame deblock filter bit-exact.
configure: Add the -D parameter to the dlltool command
amr: Set the AVFMT_GENERIC_INDEX flag
amr: Set the pkt->pos field properly to the start of the packet
amr: Set the codec->bit_rate field based on the last packet
rtsp: Specify unicast for TCP interleaved streams, too
Set the correct target for mingw64 dlltool
applehttp: Change the variable for stream position in seconds into int64_t
...
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/ac3dec.c
libavformat/avio.h
libavformat/id3v2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows the AC-3 decoder to be used directly with RealMedia
decoders that unlike the libavformat one do not byte-swap automatically.
Since the new code is only used in case we would fail directly otherwise
there should be no risk for regressions.
Depending on error_recognition is not correct, low values do
certainly not mean it is ok to crash.
Based on a patch by Reimar Döffinger <Reimar.Doeffinger@gmx.de>
These windows do not really belong in fft/mdct files and were
easily confused with the similarly named tables used by rdft.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This function is not tightly coupled to mdct, and it's in the way
of making a fixed-point mdct implementation.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This removes the rather pointless wrappers (one not even inline)
for calling the fft_calc and related function pointers.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Since initially committed in 2004, this codec has only been touched
for maintenanance. Functionally, it contains no novel ideas and
its intended audience is better served by existing mature codecs.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This allows the AC-3 decoder to be used directly with RealMedia
decoders that unlike the libavformat one do not byte-swap automatically.
Since the new code is only used in case we would fail directly otherwise
there should be no risk for regressions.
The "buf" pointer needs to be overwritten since otherwise the CRC check fails.
3GPP:
Remove ffac from and move min_snr out of AacPsyBand.
Rearrange AacPsyCoeffs to make it easier to implement energy spreading.
Rename the band[] array to bands[]
Copy energies and thresholds at the end of analysis.
LAME:
Use a loop instead of an if chain in LAME windowing.
There are several places where a buffer is byte-swapped in 16-bit units.
This allows them to share code which can be optimised for various
architectures.
Signed-off-by: Mans Rullgard <mans@mansr.com>
If the function is not inlined, an immmediate cannot be used for the
shift parameter, so the %cl register must be used instead in that case.
This fixes compilation for x86-32 using gcc with --disable-optimizations.
This fixes unexpected name collisions that were occurring with variables
declared within the macros.
It also fixes the fate-acodec-ac3_fixed regression test on x86-32.
This reverts commit cc4d3dd3e2.
revert at authors request due to better impementation being available
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
