The function macro always sets .align 2 before declaring the
function label (since 5c5e1ea3) and always sets the section to
.text (since 278caa6a).
The .align 5 before certain functions, added in fc252eba, were added
before .text and .align were added to the function macro and thus
became useless/unused when the function macro got them.
This restores the original intention, to align the loop entry
points.
Signed-off-by: Martin Storsjö <martin@martin.st>
This file no longer uses the pld instruction at all, all such uses
have been split into hpeldsp_arm.S.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously, if neither of the checks for the closesocket function
succeeded, we still kept winsock2.h and networking in general
enabled.
When targeting the WinRT API subset, the winsock2.h header is
available (making the check for it succeed, giving the impression
that winsock is available), but tests that actually try to use
such a function will fail. In this case, disable the winsock2.h
feature and networking in general, as if the winsock2.h header
test would have failed in the first place.
Signed-off-by: Martin Storsjö <martin@martin.st>
The RGB32 pixel format is RGBA/BGRA depending on target
endianness - make sure to convert it to one specific format for
the framecrc tests.
This fixes the pngparser fate test on big endian.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since pc.state is populated by shifting in from the end of the
32 bit word, the content within pc.state is already in native endian
and should not be read with the AV_R{L,B} functions.
This was already done correctly for state64 above.
This fixes the fate-corepng test on big endian.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a memory leak (or having to worry about freeing the
config string) if the colorspace isn't accepted.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes decoding, broken since 7e35037.
This is similar to what was done for the normal mp3 decoder in
f4a86bc9.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes leftover issues from 14abeaa4 which caused make
rules for programs to not match up properly when the executable
suffix was nonempty.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows both the main playlist itself as well as the variant
playlists to handle redirects combined with relative URLs.
Signed-off-by: Martin Storsjö <martin@martin.st>
Msys is unable to convert unix style absolute paths to windows style
paths when combined with certain multichar MSVC options such as
-Fo<file>. We used to work around this issue by passing them as two
separate parameters separated by a space to c99wrap, which then mapped
them back to the actual parameter format that MSVC uses.
The only paths that actually are an issue are absolute unix style
paths, and the only place such absolute paths are used with the output
arguments (-Fo, -Fe, -Fi, -out:) are for the temp files within configure.
By setting TMPDIR to . for msvc/icl builds, we never need to use
absolute unix style paths for the file output, and we can use the
actual proper form of the file output parameters. This avoids requiring
the c99wrap wrapper for remapping the parameters for cases where the
c99 converter isn't invoked at all (MSVC2013 and ICL).
Signed-off-by: Martin Storsjö <martin@martin.st>
On some platforms (such as msys), symlinks are (poorly) emulated
by simply creating a copy of the file.
This means that when building out of tree, the build tree gets
a copy of the original makefile, which can lead to unintuitive
build errors when the original makefile gets updated later.
Instead simply create a stub makefile which includes the real
one.
Signed-off-by: Martin Storsjö <martin@martin.st>
MSVC does support enough of C99 to work without the converter since
the 2013 version. Try to detect which version of the compiler in
the path needs to run the C99 converter or not. When the converter
is omitted, compilation time is reduced quite drastically.
Prior to this, users could still use --cc="c99conv -noconv cl"
when running MSVC 2013 to achieve the same.
This checks the version number instead of doing a normal compile
test, since this check needs to be done earlier in configure, before
the normal compile test helpers are usable.
Signed-off-by: Martin Storsjö <martin@martin.st>
This simplifies proper error handling in rtsp.c/rtspdec.c. When
broadcasting over RTSP in TCP mode, the AVIOContext is closed and
recreated for each sent packet, and if the recreation fails, we might
try to close a NULL buffer when freeing things at the end.
Previously, if recreating the buffer in rtspdec.c failed, this would
crash later due to trying to close a NULL buffer.
Signed-off-by: Martin Storsjö <martin@martin.st>
This was added in 9b07a2dc02 as an ABI hack to allow older
code built with lavf 52 to register protocols even if the size
of the URLProtocol struct was increased. Later, registering
protocols from outside of lavf was removed and this workaround
isn't needed any longer since lavf 53.
This removes an unchecked malloc and a memory leak for the cases
when this workaround actually was used - which it hasn't since
lavf 53.
Signed-off-by: Martin Storsjö <martin@martin.st>
A few fate instances on OS/2, OpenBSD, FreeBSD and IA64 linux currently
still fail a few tests with a maxdiff of 6.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure that pointers from av_strdup are reallocable,
which is used in av_dict_set if the AV_DICT_APPEND flag is set.
Nothing should rely on pointers from av_strdup being aligned.
Signed-off-by: Martin Storsjö <martin@martin.st>
Normally, all channel ids are between 0 and 10, while they in
uncommon cases can have values up to 64k.
This avoids allocating two arrays for up to 64k entries (at a total
of over 6 MB in size) each when most of them aren't used at all.
Signed-off-by: Martin Storsjö <martin@martin.st>
Inspired by a patch by Jakob van Bethlehem. But instead of doing
an empty POST first to trigger the WWW-Authenticate header (which
would succeed if no auth actually was required), add an Expect:
100-continue header, which is meant to be used exactly for
cases like this.
The header is added if doing a post, and the user has specified
authentication but we don't know the auth method yet.
Not all common HTTP servers support the Expect: 100-continue header,
though, so we only try to use it when it really is needed. The user
can request it to be added for other POST requests as well via
an option - which would allow the caller to know immediately that
the POST has failed (e.g. if no auth was provided but the server
required it, or if the target URL simply doesn't exist).
This is only done for write mode posts (e.g. posts without pre-set
post_data) - for posts with pre-set data, we can just redo the post
if it failed due to 401.
Signed-off-by: Martin Storsjö <martin@martin.st>
The default is to autodetect the auth method. This does require one
extra request (and also closing and reopening the http connection).
For some cases such as HTTP POST, the autodetection is not handled
properly (yet).
No option is added for digest, since this method requires getting
nonce parameters from the server first and can't be used straight
away like Basic.
Signed-off-by: Martin Storsjö <martin@martin.st>
The plain VP6 format is vertically flipped compared to VP6F/VP6A.
Support for the plain VP6 format was added in 09d8c0ae83 (which
also introduced support for muxing VP6F properly in general).
Signed-off-by: Martin Storsjö <martin@martin.st>
In these cases, there is no extradata but only the properly set
width/height values by the demuxer.
This makes sure VP6 in F4V files is cropped properly.
This is similar to what is done for H264 for letting the container
width/height override what's in the bitstream, since 30f515091.
Signed-off-by: Martin Storsjö <martin@martin.st>
If the input file contains other tracks (non video/audio) that
aren't included in ismindex, the global file duration as returned
by libavformat might not be equal to the maximum of the duration
of the actual included tracks.
Signed-off-by: Martin Storsjö <martin@martin.st>
The stream duration is used for calculating the duration of the
last fragment easily without manually parsing anything else than
the mfra/tfra atoms. When the global file duration was used
previously, the duration of the last fragment could end up wrong
if the streams weren't equally long.
Signed-off-by: Martin Storsjö <martin@martin.st>
This wasn't an issue prior to 58404738, when the whole RTMP packet
was copied at once and the length of the individual embedded flv
packets only were validated by the flv demuxer.
Prior to this patch, this could lead to reads and writes out of bound.
Signed-off-by: Martin Storsjö <martin@martin.st>
If the embedded flv packets were incomplete and we aborted the
copying loop early, make sure the flv buffer is trimmed to
only contain full packets.
Signed-off-by: Martin Storsjö <martin@martin.st>
update_offset is also called from handle_metadata, where the
packet header sizes is already included in the size.
Previously this lead to flv_data/flv_size including 15 uninitialized
bytes at the end after each call to handle_metadata, making the
flv demuxer lose sync with the stream.
Also remove leftover copying in handle_metadata. This is a leftover
from the refactoring in 5840473. (Previously this final mempcy was
the one that copied all the packets at once, while this is done
within the loop right now.) After making sure flv_size is set to
the right size, this write was out of bounds.
Signed-off-by: Martin Storsjö <martin@martin.st>
This was overlooked in d872fb0f7 since I assumed all the realloc
issues in the rtmp code was fixed already.
Signed-off-by: Martin Storsjö <martin@martin.st>
The current magic numbers passed are values in seconds, while the
parameter itself should be passed over the wire in milliseconds.
This makes (some/all?) live streams from Red5 work correctly, that
previously returned StreamNotFound even with "-rtmp_live live". After
this commit, the default 'any' also works on these streams.
Signed-off-by: Martin Storsjö <martin@martin.st>
On (certain streams/setups at least on) Red5, the description string
actually is present, but empty. Therefore, first try loading the
description, but if not found or empty, load the code string instead.
The code string is quite understandable in most cases anyway (like
"NetStream.Play.StreamNotFound").
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure errors in setting stream parameters are passed
on to the caller. This avoids successfully opening files while
some parameters aren't filled in properly.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes reads out of bounds.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
We read 2 bytes for 15 out of 16 pixels, therefore we need to
have at least 30 bytes, not 16.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Decoded data is always written in pairs within this decoder.
This fixes writes out of bounds.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously, we returned 0, meaning successful decoding but 0
bytes consumed, leading to an infinite loop.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
If the input buffer contains more data after the deflate stream,
the loop previously left running infinitely, with inflate returning
Z_STREAM_END.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids setting a negative number of frames, ending up with a
negative average frame rate.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
If a zero-length video packet is to be returned, just return
AVERROR(EAGAIN) and switch back to the audio stream.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a division by zero for G726.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a division by zero.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
In lpc_prediction(), we write up to array element 'lpc_order' in
an array allocated to hold 'max_samples_per_frame' elements.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Even if the sample rate is valid, an invalid bitrate could
pass the mode combination test below.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids divisions by zero later (and possibly assertions in
time base scaling), since an invalid rate_flag combined with an
invalid bitrate below could pass the mode combination test.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
When av_reallocp fails, the associated variables that keep track of
the number of elements in the array (and in some cases, the
separate number of allocated elements) need to be reset.
Not all of these might technically be needed, but it's better to
reset them if in doubt, to make sure variables don't end up
conflicting.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also add options for specifying a certificate and key, which can
be used both when operating as client and as server.
Partially based on a patch by Peter Ross.
Signed-off-by: Martin Storsjö <martin@martin.st>
When passing a dict to the nested protocol, it will consume
the used options from it, so a separate copy needs to be used
when reopening the connection multiple times.
Signed-off-by: Martin Storsjö <martin@martin.st>
A file containing the trusted CA certificates needs to be
supplied via the ca_file AVOption, unless the TLS library
has got a system default file/database set up.
This doesn't check the hostname of the peer certificate with
openssl, which requires a non-trivial piece of code for
manually matching the desired hostname to the string provided
by the certificate, not provided as a library function.
That is, with openssl, this only validates that the received
certificate is signed with the right CA, but not that it is
the actual server we think we're talking to.
Verification is still disabled by default since we can't count
on a proper CA database existing at all times.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes breakage in a few fate tests on certain setups
(that for some reason didn't break on OS X) after the previous
commit (8812a8057). Currently, some video streams are initialized
in ff_MPV_common_init with width/height set at 0 and only changed
to a proper video size with ff_MPV_common_frame_size_change later.
The breakage was diagnosed by Anton Khirnov.
Signed-off-by: Martin Storsjö <martin@martin.st>
The actual usefulness of the hack is not known, and it does cause
infinite loops with some broken input files.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously, s->context_initialized was left set to 1
if ff_vc1_decode_init_alloc_tables failed, skipping the
initialization completely on the next decode call.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Fragmenting blindly to a certain duration isn't a good choice
if one should be able to switch between different qualities,
therefore default to keyframes instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure other sanity checks for conflicting options
can work properly, e.g. for the conflict between the faststart
flag when using the ismv mode.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also make sure the existing length check can't overflow.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure that it doesn't try to free an AVBuffer belonging
to an earlier packet when we free the local packet at the end.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö