The mode is set in libgsm_decode_init, but the decoder
object is simply destroyed and recreated in the flush
function - therefore the mode has to be set again.
This fixes playback using the libgsm_ms decoder in avplay.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a segfault if the probe function wasn't able to
determine the format.
The bug was found by Panagiotis H.M. Issaris.
Signed-off-by: Martin Storsjö <martin@martin.st>
The change in 599b4c6ef didn't turn out to work properly on
i386 on OS X, where it broke building with PIC enabled.
Signed-off-by: Martin Storsjö <martin@martin.st>
If the sdp is generated before the rtp muxer is initialized
(e.g. as when called from the rtsp muxer), this has to be done,
otherwise the rtp muxer doesn't know that the input really is
in mp4 format.
Signed-off-by: Martin Storsjö <martin@martin.st>
If an annex b bitstream is muxed into mov, the actual written
sample is reformatted to mp4 syntax before writing.
Currently, the RTP hints that copy data from the normal video
track, where the payload data might be offset compared to the
original sample that the RTP hinting used (when 3 byte
annex b startcodes have been converted into 4 byte mp4 format
startcodes).
Signed-off-by: Martin Storsjö <martin@martin.st>
704af3e29c broke publishing
of rtmp streams, at least publishing to Wowza servers.
This changes all invoke commands to use nb_invokes.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids using bits_per_coded_sample for this information.
bits_per_coded_sample should be 4 for this codec normally,
since two samples are encoded into one 8 bit codeword.
In principle, this might be info that needs to be passed from
a demuxer, and in that case, a private AVOption isn't the best
choice, but no such samples are available at the moment, so
that use case is purely theoretical at the moment.
Signed-off-by: Martin Storsjö <martin@martin.st>
The media_type_mask is initialized via AVOptions for the
rtsp and sdp demuxers, but it isn't available as an option
for the rtp guessing demuxer (since it doesn't really make
sense there). Therefore, it must be manually initialized
instead, since a zero value means no media types at all
are accepted.
Signed-off-by: Martin Storsjö <martin@martin.st>
For the standardized 8 kHz sample rate, this works exactly the same.
For nonstandard sample rates, the different predefined G726
names (G726-16, G726-24, G726-32, G726-40) are interpreted as an
indication of the bits per coded sample, even though their
actual bitrates aren't what the name specifies.
This feels more sane than using free-form names for nonstandard
sample rate/bitrate combinations, e.g like G726-22, G726-33
for 11025 Hz.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids overflow if frame_size is over 2147, since both
frame_size and AV_TIME_BASE are plain integers.
Signed-off-by: Martin Storsjö <martin@martin.st>
This simplifies the open functions by avoiding one function
call that needs error checking, reducing the amount of
extra bulk code.
Signed-off-by: Martin Storsjö <martin@martin.st>
This string will be passed to ff_http_auth_create_response
even if no proxy is used, resulting in reading uninitialized
memory. The other auth string is always initialized by
av_url_split.
Signed-off-by: Martin Storsjö <martin@martin.st>
This was removed erroneously in
046f081b46. This define still is
necessary for getting MAP_ANONYMOUS defined on linux/glibc,
despite the define reshuffling done in that commit.
Without MAP_ANONYMOUS defined, the mprotect calls for setting the
generated mmx2 scaler code pages executable are left out, causing
crashes if that codepath is chosen.
This patch fixes scaling from 192x144 to 320x240 with
-sws_flags fast_bilinear, which crashes on linux at the
moment.
Signed-off-by: Martin Storsjö <martin@martin.st>
The tls protocol handles connections via proxies internally.
With TLS/SSL, the peer verification requires that the client
speaks directly with the server, since the proxy doesn't have
the remote server's private key.
Signed-off-by: Martin Storsjö <martin@martin.st>
This opens a plain TCP connection through the proxy via the
CONNECT HTTP method. Normally, this is allowed for connections
on port 443, but can in general be used to allow connections
to any port (depending on proxy configuration), and could thus
be used to tunnel any TCP connection via a HTTP proxy.
Signed-off-by: Martin Storsjö <martin@martin.st>
TLSv1 is compatible with SSLv3, so this doesn't change much
in terms of compatibility. By explicitly using TLSv1, OpenSSL
sends the server name indication (SNI) header, which we
already set using SSL_set_tlsext_host_name (earlier, this
didn't have any effect).
SNI allows servers to serve SSL content for different host
names with separate certificates on one single port (vhosts).
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes the function accept the format of creation_time
as output by demuxers (e.g. the mov demuxer), making the
creation timestamp stay intact if transcoding.
Signed-off-by: Martin Storsjö <martin@martin.st>
This function is used in muxers for parsing the 'creation_time'
metadata key, for converting it to a time value.
This makes it match the behaviour of the exported 'creation_time'
metadata from demuxers, where it is in UTC, too.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is useful, since the normal timegm function isn't a standard
function (requiring _BSD_SOURCE or _SVID_SOURCE on glibc to
be visible, and not available on e.g. windows). The widely available
function mktime uses the local time zone, which requires ugly
workarounds to handle UTC time.
Signed-off-by: Martin Storsjö <martin@martin.st>
The interrupt callback has to be passed in during opening (setting it
after opening isn't enough), since a blocking open couldn't be
interrupted otherwise.
Options are passed down to procotols and also need to be available
during open() in most cases.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This is a better io interrupt callback function, which has an
opaque parameter, which is given to the interrupt callback.
This allows callers to precisely cancel IO for one single
AVFormatContext, without interrupt other ones in the same
process.
Note, it's not needed in AVIOContext, at the moment.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Tested with both Basic and Digest authentication, and tested with
both proxy authentication and authentication for the requested
resource at the same time.
Signed-off-by: Martin Storsjö <martin@martin.st>
The error was hidden before, to avoid showing an error on the
first request where no auth has been provided, when the server
indicates which authentication method to use.
Now the error is printed if an authentication method was used,
but failed.
Signed-off-by: Martin Storsjö <martin@martin.st>
The chunksize internal variable has two different uses - for
reading, it's the amount of data left of the current chunk
(or -1 if the server doesn't send data in chunked mode), where
it's only an internal state variable. For writing, it's used
to decide whether to enable chunked encoding (by default), by
using the value 0, or disable chunked encoding (value -1).
This, while consistent, doesn't make much sense to expose
as an AVOption. This splits the usage of the internal variable
into two variables, chunksize which is used for reading (as
before), and chunked_post which is the user-settable option,
with the values 0 and 1, where 1 is default.
Signed-off-by: Martin Storsjö <martin@martin.st>
The return value ret isn't an error code that can be passed
to ERR_error_string().
This makes the error messages printed actually contain useful
information.
Signed-off-by: Martin Storsjö <martin@martin.st>
The caller expects the seekhead struct to be freed when calling
matroska_write_seekhead. Currently, the structure is leaked if the
seek fails.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is to make developers aware of the fact that they will
start using the new init function at some point.
Signed-off-by: Martin Storsjö <martin@martin.st>
It might make sense not to make the function completely mandatory
immediately at the next bump, which might be quite soon after
the function was introduced.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes rdt work again, which has been broken since
603b8bc2a1. This commit made
opening a demuxer without a file (or in this case, with a filename
which can't be opened) fail, unless the demuxer actually declared
AVFMT_NOFILE.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since 1.0.0, this function is deprecated. A new function,
CRYPTO_THREADID_set_callback is available, but if not set at all,
it uses the address of errno as thread id, which should be
sufficient for most systems.
On windows, it never was necessary to use this function even
before 1.0.0, it used the right win32 API function for this
by default.
Signed-off-by: Martin Storsjö <martin@martin.st>
Calling the init function will become mandatory at some later
point. By calling it, more heavy network init (such as SSL/TLS
library init) can be done once at startup, instead of implicitly
when used (which could lead to it being done a number of times).
Signed-off-by: Martin Storsjö <martin@martin.st>
Note, this protocol doesn't yet check verify the server
certificate against a local database of trusted CA root
certificates.
Signed-off-by: Martin Storsjö <martin@martin.st>
This extends the lock manager in avcodec to manage two separate
mutexes via the user-specified lock functions.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows it to use the defaults specified by preset/tune,
without overwriting it with the default value from the
AVCodecContext field.
Signed-off-by: Martin Storsjö <martin@martin.st>
This function used to set codec_type. With the current fallback
implementation based on avcodec_get_context_defaults3, codec_type
won't be set to the value passed in, but will be set to
AVMEDIA_TYPE_UNKNOWN. Legacy callers of this function might expect
this field to be set to the value passed in.
Signed-off-by: Martin Storsjö <martin@martin.st>
If attribute_deprecated is used in an enum declaration, it
should follow the 'enum' keyword, otherwise it's ignored
silently. This is the only case of attribute_deprecated for
enum declarations currently.
Currently, this attribute_deprecated doesn't have any effect.
If moved to the right place, it emits a warning every single
time avcodec.h is included, like this:
avcodec.h:2827: warning: ‘AVLPCType’ is deprecated (declared at avcodec.h:543)
There is already a working attribute_deprecated for the
corresponding field in AVCodecContext, so therefore this
one shouldn't be needed.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows setting the filter_src option for these demuxers, too,
which wasn't possible at all before (where the option only was set
via URL parameters for RTSP).
Signed-off-by: Martin Storsjö <martin@martin.st>
avconv doesn't map video streams to a muxer without specifying a
manual stream mapping if the default video codec is CODEC_ID_NONE.
Signed-off-by: Martin Storsjö <martin@martin.st>
With the changes in 3b3ea34655,
"Remove all uses of deprecated AVOptions API", av_opt_flag_is_set
was broken, since it now uses av_opt_find, which doesn't return
named constants unless a unit to look for the constant in is given.
This broke enabling LATM encapsulated AAC output in RTP.
Signed-off-by: Martin Storsjö <martin@martin.st>
It was broken in 3b3ea34655
"Remove all uses of deprecated AVOptions API", where any
presence of a payload_type AVOption caused its value to
be returned, even if it wasn't set (and thus had the default
-1 value).
This caused the RTP muxer to be broken.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö
