Currently, the code doing this is spread over several places and may
behave in unexpected ways. E.g. automatic 'default' marking is only done
for streams fed by complex filtergraphs. It is also applied in the order
in which the output streams are initialized, which is effectively
random.
Move processing the dispositions at the end of open_output_file(), when
we already have all the necessary information.
Apply the automatic default marking only if no explicit -disposition
options were supplied by the user, and apply it to the first stream of
each type (excluding attached pics) when there is more than one stream
of that type and no default markings were copied from the input streams.
Explicitly document the new behavior.
Changes the results of some tests, where the output file gets a default
disposition, while it previously did not.
This commit adds a powerful and customizable gblur Vulkan filter,
which provides a maximum 127x127 kernel size of Gaussian Filter.
The size could be adjusted by requirements on quality or performance.
The following command is on how to apply gblur_vulkan filter:
ffmpeg -init_hw_device vulkan -i input.264 -vf hwupload=extra_hw_frames=16,gblur_vulkan,hwdownload,format=yuv420p output.264
Signed-off-by: Wu Jianhua <jianhua.wu@intel.com>
Changes av_clipf to return amin if a is nan.
Before if a is nan av_clipf_c returned nan and
av_clipf_sse would return amax. Now the both
should behave the same.
This works because nan > amin is false.
The max(nan, amin) will be amin.
Signed-off-by: James Almer <jamrial@gmail.com>
There is no reason to wrap them in #ifndef guards, they should only be
defined here and nowhere else. The define guards just add the
possibility to accidentally use the same FF_API name in different
libraries.
NEEDS_UNSAFE has the same value as NEEDS_FILE,
causing "duration not allowed if safe" error
while duration directive doesn't require unsafe mode.
Signed-off-by: Googleplex <yyoung2001@gmail.com>
Previously this was hardcoded to 2500000 bytes, so probing of the stream codecs
was always limited by this, and not probesize.
Also keep track of the actual size of packets in raw_packet_buffer and not the
remaining size for simplicity.
Fixes ticket #5860.
Signed-off-by: Marton Balint <cus@passwd.hu>
Unfortunately pad_len and pad_dur behaviour was different if 0 was specified,
pad_dur handled 0 duration as infinity, for pad_len, infinity was -1.
Let's make the behaviour consistent by handling 0 duration for pad_dur and
whole_dur as indeed 0 duration. This somewhat changes the behaviour of the
filter if 0 was explicitly specified, but deprecating the old option and adding
a new for the corrected behaviour seemed a bit overkill. So let's document the
change instead.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes: signed integer overflow: 2105344 * 539033345 cannot be represented in type 'int'
Fixes: out of array write
Fixes: 39956/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_SPEEX_fuzzer-4766419250708480
Fixes: 40293/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_SPEEX_fuzzer-5219910217760768
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is ment to be a cosmetic change
old timings:
42780 UNITS in grayf32le, 1 runs, 0 skips
56720 UNITS in grayf32le, 2 runs, 0 skips
67265 UNITS in grayf32le, 4 runs, 0 skips
58082 UNITS in grayf32le, 8 runs, 0 skips
63512 UNITS in grayf32le, 16 runs, 0 skips
52720 UNITS in grayf32le, 32 runs, 0 skips
46491 UNITS in grayf32le, 64 runs, 0 skips
68500 UNITS in grayf32be, 1 runs, 0 skips
66930 UNITS in grayf32be, 2 runs, 0 skips
62305 UNITS in grayf32be, 4 runs, 0 skips
55510 UNITS in grayf32be, 8 runs, 0 skips
50216 UNITS in grayf32be, 16 runs, 0 skips
44480 UNITS in grayf32be, 32 runs, 0 skips
42394 UNITS in grayf32be, 64 runs, 0 skips
new timings:
46660 UNITS in grayf32le, 1 runs, 0 skips
51830 UNITS in grayf32le, 2 runs, 0 skips
53390 UNITS in grayf32le, 4 runs, 0 skips
50910 UNITS in grayf32le, 8 runs, 0 skips
44968 UNITS in grayf32le, 16 runs, 0 skips
40349 UNITS in grayf32le, 32 runs, 0 skips
38330 UNITS in grayf32le, 64 runs, 0 skips
39980 UNITS in grayf32be, 1 runs, 0 skips
49630 UNITS in grayf32be, 2 runs, 0 skips
53540 UNITS in grayf32be, 4 runs, 0 skips
59767 UNITS in grayf32be, 8 runs, 0 skips
51206 UNITS in grayf32be, 16 runs, 0 skips
44743 UNITS in grayf32be, 32 runs, 0 skips
41468 UNITS in grayf32be, 64 runs, 0 skips
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Since texinfo 6.8, there's no longer an INLINE_CONTENTS variable.
makeinfo: warning: set_from_init_file: unknown variable INLINE_CONTENTS
texinfo commit 62a6adfb33b006e187483779974bbd45f0f782b1 replaced
INLINE_CONTENTS with OUTPUT_CONTENTS_LOCATION.
texinfo commit 41f8ed4eb42bf6daa7df7007afd946875597452d replaced
OUTPUT_CONTENTS_LOCATION with CONTENTS_OUTPUT_LOCATION.
With texinfo 6.8 and above, the same as INLINE_CONTENTS=1 could be
achieved by CONTENTS_OUTPUT_LOCATION=inline.
https://www.gnu.org/software/texinfo/manual/texinfo/html_node/HTML-Customization-Variables.html
Since texinfo commit 6a5ceab6a48a4f052baad9f3474d741428409fd7, the
formatting functions, in particular begin_file, program_string and
end_file, are prefixed with format_, i.e. format_begin_file, etc.
This patch fixes building the documentation when texinfo 6.8, or
above, is used:
Unknown formatting type begin_file
at /usr/bin/makeinfo line 415.
Unknown formatting type program_string
at /usr/bin/makeinfo line 415.
Unknown formatting type end_file
at /usr/bin/makeinfo line 415.
This makes output consistent with a similar warning just few
lines above where this flag is checked in the same way.
Signed-off-by: softworkz <softworkz@hotmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
When viewing logs, it's sometimes useful to be able to see whether
execution was ended via q command.
Signed-off-by: softworkz <softworkz@hotmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Before:
overlay AVOptions:
x <string> ..FV....... set the x expression (default "0")
y <string> ..FV....... set the y expression (default "0")
eof_action <int> ..FV....... Action to take when encountering EOF from secondary input (from 0 to 2) (default repeat)
repeat 0 ..FV....... Repeat the previous frame.
endall 1 ..FV....... End both streams.
pass 2 ..FV....... Pass through the main input.
eval <int> ..FV....... specify when to evaluate expressions (from 0 to 1) (default frame)
After:
a
overlay AVOptions:
x <string> ..FV....... set the x expression (default "0")
y <string> ..FV....... set the y expression (default "0")
eof_action <int> ..FV....... Action to take when encountering EOF from secondary input (from 0 to 2) (default repeat)
repeat 0 ..FV....... Repeat the previous frame.
endall 1 ..FV....... End both streams.
pass 2 ..FV....... Pass through the main input.
eval <int> ..FV....... specify when to evaluate expressions (from 0 to 1) (default frame)
Signed-off-by: softworkz <softworkz@hotmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
In particular, allows users to go all the way up to PL_LOG_TRACE if
desired. (While also avoiding some potentially unnecessary callbacks for
filtered messages, including e.g. the CPU cost of printing out shader
sources)
Response to runtime log level changes by updating it once per
filter_frame(), which should hopefully be often enough.
This filter conceptually maps the libplacebo `pl_renderer` API into
libavfilter, which is a high-level image rendering API designed to work
with an RGB pipeline internally. As such, there's no way to avoid e.g.
chroma interpolation with this filter, although new versions of
libplacebo support outputting back to subsampled YCbCr after processing
is done.
That being said, `pl_renderer` supports automatic integration of the
majority of libplacebo's shaders, ranging from debanding to tone
mapping, and also supports loading custom mpv-style user shaders, making
this API a natural candidate for getting a lot of functionality out of
relatively little code.
In the future, I may approach this problem either by rewriting this
filter to also support a non-renderer codepath, or by upgrading
libplacebo's renderer to support a full YCbCr pipeline.
This unfortunately requires a very new version of libplacebo (unreleased
at time of writing) for timeline semaphore support. But the amount of
boilerplate needed to hack in backwards compatibility would have been
very unreasonable.
Include windows.h to fix it. Normally, it'd be better to include it in
vulkan_functions.h, but I'm reasonably confident nothing else that uses
the Vulkan code will need to include Windows functions and not windows.h.
