The code savings more than offset the size of the table
(1936B vs 768B with GCC 10.3 at -O3).
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: signed integer overflow: 8511838621821575200 - -3954125146725285889 cannot be represented in type 'long'
Fixes: 33414/clusterfuzz-testcase-minimized-ffmpeg_dem_MOV_fuzzer-6610119325515776
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
These have mostly been added because of FF_API_*; yet when these were
removed, removing the header has been forgotten.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
av_shrink_packet() takes int size, so size must fit in int
Fixes: out of array access
Fixes: 35607/clusterfuzz-testcase-minimized-ffmpeg_dem_MXF_fuzzer-4875541323841536
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When streaming mode is enabled, the DASH manifest is written on the
first packet for the segment so that the segment can be advertised
immediately to clients. It was also still writing the manifest at the
end of the segment leading to two duplicate writes.
Some encoders send GET_PARAMETER requests as a keep-alive mechanism.
If the client doesn't reply with an OK message, the encoder will close
the session. This was encountered with the impath i5110 encoder, when
the RTSP Keep-Alive checkbox is enabled under streaming settings.
Alternatively one may set the X-No-Keepalive: 1 header, but this is more
of a workaround. It's better practice to respond to an encoder's
keep-alive request, than disable the mechanism which may be manufacturer
specific.
Signed-off-by: Hayden Myers <hmyers@skylinenet.net>
Signed-off-by: Martin Storsjö <martin@martin.st>
Without end_trimming, the last packet will contain unexpected samples used
for padding.
This commit partially fixes#6367 when the audio length is long enough.
dd if=/dev/zero of=./silence.raw count=20 bs=500
oggenc --raw silence.raw --output=silence.ogg
oggdec --raw --output silence.oggdec.raw silence.ogg
ffmpeg -codec:a libvorbis -i silence.ogg -f s16le -codec:a pcm_s16le silence.libvorbis.ffmpeg.raw
ffmpeg -i silence.ogg -f s16le -codec:a pcm_s16le silence.native.ffmpeg.raw
ls -l *.raw
The original test case in #6367 is still not fixed due to a remaining issue.
The remaining issue is that ogg_stream->private is not kept during
ogg_save()/ogg_restore(). Field final_duration in the private data is
important to calculate end_trimming.
Some common operations such as avformat_open_input() and
avformat_find_stream_info() before reading packet will trigger ogg_save()
and ogg_restore().
Luckily, final_duration will not get updated until the last ogg page. The
save/restore mentioned above will not change final_duration most of the
time. But if the audio length is short, those reads may be performed on
the last ogg page, causing trouble keeping the correct value of
final_duration. We probably need a more complicated patch to address this
issue.
Signed-off-by: Guangyu Sun <gsun@roblox.com>
Frame size of Opus stream was previously presumed here to be 960 samples
(20ms), however sizes of 120, 240, 480, 1920, and 2880 are also allowed.
It can also alter on a per-packet basis and even multiple frames may be
present in a single packet according to the specification, for the sake
of simplicity however, let us assume that this doesn't occur.
Because the mFramesPerPacket field, representing the number of samples
per packet in the ffmpeg terminilogy, is the key factor in calculating
packet durations and all that follows from that (index, bitrate, ...),
it is crucial to get right.
Therefore, if the packet size is not available ahead of time (as it is in
the case of Opus), calculate an average from the stream duration once we
know how many packets there are and update the filed in the header.
POSIX errno is positive. We have strict_pthread_cond_wait to handle
error code during development.
Signed-off-by: zhilizhao <zhilizhao@tencent.com>
Reviewed-by: Jun Zhao <barryjzhao@tencent.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The beginning of the private contexts of both the FLAC and the TAK
demuxer currently mimick FFRawDemuxerContext: A pointer to an AVClass
followed by the AVOpt-enabled field raw_packet_size. Said field is only
used by the demuxers' read_packet functions via
ff_raw_read_partial_packet(), which treats the private context as an
FFRaawDemuxerContext. Yet this is fragile, so better include a
FFRawDemuxerContext struct at the beginning of said demuxers' private
contexts.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The codec2 muxer has no options and so it needs no AVClass;
and it certainly needs no AVClass of category AV_CLASS_CATEGORY_DEMUXER.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These demuxers don't need anything from rawdec; they furthermore only
used rawdec.h to include opt.h. Both of this has been fixed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
