Fixes: signed integer overflow: -14914387 + -2147418648 cannot be represented in type 'int'
Fixes: 46464/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ALAC_fuzzer-474307197311385
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It results in undefined behaviour. Instead initialize the mutexes
and condition variables once during init (and check these
initializations).
Also combine the corresponding mutex and condition variable
into one structure so that one can allocate their array
jointly.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Adding a new AVHWAccel also adds a new CONFIG variable for it
and said config variables are typically used to calculate the
size of stack arrays. In such a context, an undefined CONFIG
variable does not evaluate to zero; instead it leads to
a compilation failure. Therefore treat this file like the other
files containing lists of configurable components and prompt
for reconfiguration if it is modified.
(E.g. a44fba0b5b led to compilation
failures for me.)
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Regression since c9de096851.
Fixes Coverity ID 1506839.
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This leaves out RealAudio DolbyNet, which utilizes bsids 9 and 10,
It is not clear whether the interpreted bit rate value (divided by
2 or 4 depending on the variant), or the original bit rate value
should be utilized to receive the bit_rate_code index.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Add the AC-3 frame type, as well as early exit from additional packet
parsing in case of AC-3, as only a single packet is required to get
the required information.
Additionally, expose ac3_bit_rate_code via the eac3_info struct as
it is required for AC3SpecificBox.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
This simplifies the code to no longer have #ifs in a manner which
does not require handling avpriv_ac3_parse_header returning ENOSYS.
As an existing example, the MPEG-TS muxer already requires the AC-3
parser, and in order to fix existing issues with the current AC-3
movenc code, switching to use the AC-3 parser is required, so this
is an enabling change for that.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Required by MP4's AC3SpecificBox and MPEG-TS AC-3 audio_descriptor,
of which the former is implemented in our MP4 writer.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
This function is only called from the decoder's init function
and given that this decoder has FF_CODEC_CAP_INIT_CLEANUP set,
hevc_decode_free() is called automatically (currently it would
be called twice with the second call being redundant).
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
All contexts are always initialized during init, regardless
of whether frame threading is in use or not.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
avcodec_thread_init() has been removed in
9a79bb552a.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Update the still AVIF parser to only read the primary item. With this
patch, AVIF still images with exif/icc/alpha channel will no longer
fail to parse.
For example, this patch enables parsing of files in:
https://github.com/AOMediaCodec/av1-avif/tree/master/testFiles/Microsoft
Adding two fate tests:
1) demuxing of still image with 1 item - this test will pass regardless
of this patch.
2) demuxing of still image with 2 items - this test will fail without
this patch and will pass with patch applied.
Partially fixes trac ticket #7621
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: James Zern <jzern@google.com>
Add pat and pmt table at start of each segment in single_file mode enhanced
compatibility of hls stream. Because some hls clients separate parsing segment
of hls stream, the absence of pat/pmt will cause parsing to fail.
Reviewed-by: Steven Liu <liuqi05@kuaishou.com>
Signed-off-by: huheng <heng.hu.1989@gmail.com>
This allows for wider compatibility with older devices, such as those
running iOS 3. The only difference between HLS version 2 and version 3 is
that version 3 supports non-integer EXTINF values, and as such, we can
default to version 2 if we're using whole-integer EXTINFs anyways, when
`-hls_flags round_durations` is set.
As this code seems to otherwise consistently use the lowest compatible
version, this seems to fit in properly with existing behavior.
Testing confirms with that this patch, HLS output can work all the way back
to iOS 3.
Reviewed-by: Steven Liu <liuqi05@kuaishou.com>
Signed-off-by: Lucy <lucy@absolucy.moe>
When compiling decklink, this header is included from
a C++ file (albeit inside 'extern "C"') and this
causes compilation failures because of an implicit
void* -> char* conversion. So add an explicit cast.
Fixes ticket #9819.
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
- ff_pix_abs16_neon
- ff_pix_abs16_xy2_neon
In direct micro benchmarks of these ff functions verses their C implementations,
these functions performed as follows on AWS Graviton 3.
ff_pix_abs16_neon:
pix_abs_0_0_c: 141.1
pix_abs_0_0_neon: 19.6
ff_pix_abs16_xy2_neon:
pix_abs_0_3_c: 269.1
pix_abs_0_3_neon: 39.3
Tested with:
./tests/checkasm/checkasm --test=motion --bench --disable-linux-perf
Signed-off-by: Jonathan Swinney <jswinney@amazon.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Frame counters can overflow relatively easily (INT_MAX number of frames is
slightly more than 1 year for 60 fps content), so make sure we are always
using 64 bit values for them.
A live stream can easily run for more than a year and the framedup logic breaks
on an overflow.
Signed-off-by: Marton Balint <cus@passwd.hu>
For ipcm and fpcm streams, big-endian format is the default, but it can be changed
with additional 'pcmC' sub-atom of audio sample description.
Details can be found in ISO/IEC 23003-5:2020
Fixes ticket #9763.
Fixes ticket #9790.
Patch simplified by Marton Balint.
Signed-off-by: Marton Balint <cus@passwd.hu>
AVIF specification allows for alpha channel as an auxiliary item (in
case of still images) or as an auxiliary track (in case of animated
images). Add support for both of these. The AVIF muxer will take
exactly two streams (when alpha is present) as input (first one being
the YUV planes and the second one being the alpha plane).
The input has to come from two different images (one of it color and
the other one being alpha), or it can come from a single file
source with the alpha channel extracted using the "alphaextract"
filter.
Example using alphaextract:
ffmpeg -i rgba.png -filter_complex "[0:v]alphaextract[a]" -map 0 -map "[a]" -still-picture 1 avif_with_alpha.avif
Example using two sources (first source can be in any pixel format and
the second source has to be in monochrome grey pixel format):
ffmpeg -i color.avif -i grey.avif -map 0 -map 1 -c copy avif_with_alpha.avif
The generated files pass the compliance checks in Compliance Warden:
https://github.com/gpac/ComplianceWarden
libavif (the reference avif library) is able to decode the files
generated using this patch.
They also play back properly (with transparent background) in:
1) Chrome
2) Firefox (only still AVIF, no animation support)
Reviewed-by: James Zern <jzern@google.com>
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
GL and Metal cache the state at time of texture creation. GLES2 and
Direct3D 11 use the state at time of the render copy call.
So the only way we can get the correct behavior consistently is by
making sure the state is set for both the upload *and* the draw call.
This probably isn't our bug to fix (upstream should make itself behave
consistently and also document its functions), but as it stands,
`ffplay` is misrendering BT.709 as BT.601 on my stock Linux system, and
that leaves a bad taste in my mouth.
Signed-off-by: Niklas Haas <git@haasn.dev>
Currently the format listing misses the J formats completely, yet
they are marked as supported in the encoder. Thus to make the logic
support them while not explicitly listing them, make the logic
utilize chroma subsampling information in both width and height
available through the pixel format descriptor.
Enable dynamic QP configuration in runtime on qsv encoder. Through
AVFrame->metadata, we can set key "qsv_config_qp" to change QP
configuration when we encode video in CQP mode.
Signed-off-by: Yue Heng <yue.heng@intel.com>
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Change the default value of "bf" for hevc_qsv to -1. 8 isn't the best
choice so let MSDK to decide the number of b frames.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
cuvidParseVideoData only supports pure OBUs, it reports an unknown
error with AV1CodecConfigurationRecord. Check whether extradata
is AV1CodecConfigurationRecord and skip the first 4 bytes to fix
the issue.
The bug is revealed in ffmpeg cmd since 45e3b6a68 and ffd1316e.
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
