This allows the caller to either include them (and get more packets
decoded, but possibly some nonperfect frames), or discard them (by
setting fflags=discardcorrupt).
Signed-off-by: Martin Storsjö <martin@martin.st>
This uses page duration instead of byte size to determine when to buffer
the page. Also, it tries to avoid continued pages by buffering the current
page if there are already packets in the page and adding the next packet
would require it to be continued on a new page. This can improve seeking
performance.
The default page duration is 1 second, which is much saner than filling
all page segments by default.
This sends NACK for missed packets and PLI (picture loss indication)
if a depacketizer indicates that it needs a new keyframe, according
to RFC 4585.
This is only enabled if the SDP indicated that feedback is supported
(via the AVPF or SAVPF profile names).
The feedback packets are throttled to a certain maximum interval
(currently 250 ms) to make sure the feedback packets don't eat up
too much bandwidth (which might be counterproductive). The RFC
specifies a more elaborate feedback packet scheduling.
The feedback packets are currently sent independently from normal
RTCP RR packets, which is not totally spec compliant, but works
fine in the environments I've tested it in. (RFC 5506 allows this,
but requires a SDP attribute for enabling it.)
Signed-off-by: Martin Storsjö <martin@martin.st>
The warning is a false positive, but I prefer actually initializing
it over masking it with av_uninit, since the code is not performance
critical.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is a bug from c7d4de3d73 - if the previous frame wasn't
returned yet (due to missing the final packets), but we have
enough data of it to return the first partition, we write that into
pkt and set returned_old_frame. That commit forgot returning 0 for
the case where this current packet didn't have the end_packet flag
set.
Signed-off-by: Martin Storsjö <martin@martin.st>
If we timed out and consumed a packet from the reordering queue,
but didn't return a packet to the caller, recheck the queue status.
Otherwise, we could end up in an infinite loop, trying to consume
a queued packet that has already been consumed.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The following out-of-memory check is broken.
*sorted_segments = av_mallocz(...);
if (!sorted_segments) { ... }
The correct NULL check should use *sorted_segments.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
To use this, set sdpflags=custom_io to the sdp demuxer. During
the avformat_open_input call, the SDP is read from the AVFormatContext
AVIOContext (ctx->pb) - after the avformat_open_input call,
during the av_read_frame() calls, the same ctx->pb is used for reading
packets (and sending back RTCP RR packets).
Normally, one would use this with a read-only AVIOContext for the
SDP during the avformat_open_input call, then close that one and
replace it with a read-write one for the packets after the
avformat_open_input call has returned.
This allows using the RTP depacketizers as "pure" demuxers, without
having them tied to the libavformat network IO.
Signed-off-by: Martin Storsjö <martin@martin.st>
So far, aviocontexts are used either in pure-read or pure-write
mode - full read/write mode doesn't work well (and implementing it
is a much larger, not totally trivial change).
This patch allows using avio_read and ffio_read_partial on
read/write aviocontexts, where the read operations are passed
through directly unbuffered, while writes are buffered as usual.
This is enough to support the operations needed by packet based
data transfer like in udp/rtp, where aviocontext is the only
public API for hooking up custom IO.
Signed-off-by: Martin Storsjö <martin@martin.st>
The function find_things() in configure is confused by component
registration calls as part of multiline macros defining combined
component registration. Coalesce those macros into one line to
work around the issue.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Limelight is a not too uncommon CDN. The authentication scheme is
pretty similar to the adobe authentication, but is even closer to
normal http digest authentication (but not close enough to warrant
sharing code) than the adobe version.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is mostly used to authenticate the client when publishing.
Tested with wowza and akamai.
Some but not all servers support resending a new connect invoke
within the same connection, so always reconnect for sending a new
connection attempt. This matches what other applications do as well.
The authentication scheme is structurally pretty similar to http
digest authentication, but uses base64 instead of hex strings.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also fixes linking in various configs with only individual parts enabled
because the RTP muxer chaining code depends on the general RTP code,
which is now accounted for.
If s->filename doesn't contain any period/filename extension to strip
away, the buffer will be too small to fit both strings. This isn't
any buffer overflow since the concatenation uses av_strlcat with
the right buffer size.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is built on the assumption that the first partition of each
VP8 packet is essential for decoding any later packet - if this
partition is broken/missed, the arithmetic coder gets out of sync
and decoding the bitstream in further packet ends up with total
garbage. If packets of a frame are lost, make sure the first
partition is intact (return only this part of the packet, nothing
else), otherwise stop returning data until the next keyframe is
received.
Alternatively, one would simply not return any packets at all
until the next keyframe, if packet loss is detected.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes all users of rtpenc_chain (rtsp muxer, sapenc, mov
rtp hinting) work again, broken since 8034130e0.
Signed-off-by: Martin Storsjö <martin@martin.st>
The FLV muxer tries to update the header in write_trailer, which is
impossible if writing to a pipe or network stream. Don't write header
data if seeking to the header fails.
Signed-off-by: Martin Storsjö <martin@martin.st>
The sample in https://bugzilla.libav.org/show_bug.cgi?id=393 and
samples/F4V/H263_NM_f.mp4 both have codec_tag H263 for different
codecs. H263 is apparently used by Flash Media Server for Sorensen
Spark videos.
Patch based on commit 5442083b1c by
Carl Eugen Hoyos. Fixes bug 393.
This makes it easier for receivers to decide what to do if data
is lost.
Refactor calculating the max payload size, to avoid hardcoding the
header size in too many places, reducing the number of lines that
have to be touched if the header is adjusted further.
Signed-off-by: Martin Storsjö <martin@martin.st>
Avoids trying to read a packet with 0 or negative size.
Avoids a potential infinite loop due to seeking backwards.
Partially based on a patch by Michael Niedermayer.
This comment was added in e309128f, in 2002, and has been brought
along since then more or less unmodified.
The first point of the todo was implemented in dbf30963 in 2006,
the second one is not relevant to rtpdec.c (brought along from
rtp.c in 8eb793c4 in 2008) but would be more relevant to the
rtp muxer, although it isn't a good idea anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>
The values compared here can be more than INT64_MAX apart. Since the
difference is always positive, converting to uint64_t before subtracting
gives the correct result without overflows.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Also remove a duplicate function in the MPEG-TS demuxer.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Also make sure extradata is freed in the case where multiple
NUV_EXTRADATA frame types are found. This may not happen in practice,
but it could happen in a malformed stream, which would lead to a memleak
if not handled.
Fixes curruption of metadata in the INFO chunk.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Scaling the denominator instead of the numerator if it is too large
loses precision. Fixes an assert caused by a negative frame duration in
the fuzzed sample nasa-8s2.ts_s202310.
CC: libav-stable@libav.org
Current code would incorrectly process e.g. 'ff 00 ff 00 ff' to
'ff ff ff', while it should be 'ff ff 00 ff'.
Fixes Bug 395.
CC: libav-stable@libav.org
The following error handling is broken due to signedness.
int file_size;
uint32_t tag_bytes;
int64_t tag_start;
...
tag_start = file_size - tag_bytes - APE_TAG_FOOTER_BYTES;
if (tag_start < 0) { ... }
Note that tag_bytes is unsigned, which makes the right-hand side of
`tag_start = ...' unsigned, too. The 32-bit unsigned value is then
zero-extended to 64 bits. Therefore, tag_start must be non-negative,
and the check (tag_start < 0) is always false, which breaks the error
handling. This patch fixes the check.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Since the pointer `oc' is NULL, oc->oformat->name will cause a null
pointer dereference. This patch changes it to seg->oformat->name.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously the high end byte was always set to zero. Also get
rid of an unnecessary multiplication (which in practice couldn't
overflow) before shifting.
Signed-off-by: Martin Storsjö <martin@martin.st>
This gets rid of this warning:
libavformat/rtsp.c: In function ‘rtsp_parse_transport’:
libavformat/rtsp.c:794: warning: cast discards qualifiers from pointer target type
Signed-off-by: Martin Storsjö <martin@martin.st>
Mainly clean up the RTP statistics code, plus a few other obviously
misindentend lines.
Remove some useless comments, de-doxygenize some comments,
add spacing around operators and fix a typo.
Signed-off-by: Martin Storsjö <martin@martin.st>
HAVE_THREADS is set in config.h if pthreads or w32threads is
available, which presumably the proper condition here.
Also fixes undefined behaviour in preprocessor directives.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This adds support for building on Plan 9 x86-32. The compat/plan9
directory contains these items:
- replacements for the 'head' and 'printf' shell commands
- wrapper for main() to disable FPU exceptions
Larger required changes to the system are described in the
documentation.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The absence of this function will only give a less informative
string back from our fallback implementation of getnameinfo().
Signed-off-by: Mans Rullgard <mans@mansr.com>
This avoids having to share this table across the library
boundaries.
This shared table used to be problematic, if always declaring
all exported data symbols with the dllimport attribute (even
while building that same library), since it needs to be a
link-time constant when it is used in AVCodec declarations
(in mpeg12enc.c).
Signed-off-by: Martin Storsjö <martin@martin.st>
This seemed to assume that one never used writing avio unless
muxers or networking was enabled.
This ifdef is a remnant since 8fa641f8.
Signed-off-by: Martin Storsjö <martin@martin.st>
This way avserver only depends on the data structures of the ffm
demuxer, which it already does, and not also on private functions
being exported by the library.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This avoids having to overestimate the md5 context size, which
isn't known beforehand, allowing us to use the new allocate functions
instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some invocations include a verb in the log message, others do not. Yet
av_log_missing_feature expects callers to provide a verb. Change the
function to include a verb instead and update the callers accordingly.
The result is a more natural function API and correct English in the
function invocations.
Not all details are implemented, but it's enough for proper
playback as long as there is no packet loss.
Tested to work with the packetizer in gstreamer (which although
uses a different codec name, to clarify that it is still a spec
draft).
Signed-off-by: Martin Storsjö <martin@martin.st>
avconv provides an option to set it externally and there isn't a way for
the outer demuxer to report the inner demuxer flag.
Solves a bad interaction between mpegts and x264, but requires
additional setting for the user.
We don't need to return an error if the directory already existed.
We make sure that the directory actually is properly writeable later
within ism_write_header by writing a manifest anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure any buffered data is written to the segment, for
muxers that buffer up data internally (e.g. fragmented mp4).
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure new inline headers are emitted when the next
packet is written. This allows segmenting mpegts without calling
write_header/write_trailer (nor freeing/reiniting the muxer)
for each segment.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some segmented formats (such as fragmented mp4) are "bare", as in,
the segment files do not have the same headers/trailers as full normal
files of that format have.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure the muxers are set up in the way they expect
with no data left around from the previous run (which could
cause various issues including memory leaks, depending on the chaine
muxer).
This fixes memory leaks with the mpegts and flv muxers. It also
makes the usage of chained muxers correct.
Signed-off-by: Martin Storsjö <martin@martin.st>
With this change, the segmenter muxer doesn't rely on anything
not available/supported to libavformat external users, making
the segmenter muxer do things just like a normal segmenter
application using libavformat would do.
Signed-off-by: Martin Storsjö <martin@martin.st>
Before, the chained muxer reused the AVStreams array from
the outer muxer, which made it impossible to use the proper
public functions (such as av_write_frame) when calling the
chained muxer.
Signed-off-by: Martin Storsjö <martin@martin.st>
This might not be needed at the moment, but it's good practice to
pass it to all chained AVFormatContexts, if it would happen to be
used there at a later point.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use the MAX_URL_SIZE define where applicable. Increase buffer
sizes for all buffers that need to fit a long pathname - buffers
that need to fit only the hostname (and other short strings, but
not the pathname - such as "headers" in http_connect) are kept
at 1024 bytes for now.
Also increase the max line length in http_read_header, since it
might need to contain a full url for Location: redirects.
Signed-off-by: Martin Storsjö <martin@martin.st>
Anonymous typedef structs prevent forward declaration, this
change gives the AVIOContext and AVIOInterruptCB structures
a name. These structures are now in line with other common
structures such as AVFormatContext and AVCodecContext.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This packetization scheme simply places the full packets into the
RTP packet without any extra header bytes.
Signed-off-by: Martin Storsjö <martin@martin.st>
Additional safety in case a special ogg stream is crafted
with the proper number of
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
