* commit '5e80fb7ff226f136dbcf3fed00a2966bf8e9bd70':
lavc: add a public API for parsing vorbis packets.
Conflicts:
doc/APIchanges
libavcodec/Makefile
libavcodec/version.h
libavcodec/vorbis_parser.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Replace "frames to record" with "frames to output". The "to record"
makes it seem like an input option, or that it would capture the frames
instead of outputting them.
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Lou Logan <lou@lrcd.com>
* commit 'cf589faa5b7aed3bb38e08dcd00bd951e69686d1':
movenc: Add a flag for using default-base-is-moof in tfhd atoms
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a9911a1b2df37ca808e06dc30627215f4ec9a9e4':
doc: Document the omit_tfhd_offset flag to the mp4 muxer
Conflicts:
doc/muxers.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Similarly to the omit_tfhd_offset flag added in e7bf085b, this
avoids writing absolute byte positions to the file, making them
more easily streamable.
This is a new feature from 14496-12:2012, so application support
isn't necessarily too widespread yet (support for it in libav was
added in 20f95f21f in July 2014).
Signed-off-by: Martin Storsjö <martin@martin.st>
The fieldmatch filter has no problem with mixed telecined and
progressive content but the decimate filter does not detect the
changing framerate and drops progressive frames.
This can be improved in the decimate filter but for the moment
explicitely mentioning that mixed telecined and progressive
content is unsupported is an improvement.
Fixes ticket #3968.
Since av_gettime() is used in a number of places where actual
real time clock is required, the monotonic clock introduced in
ebef9f5a5 would have consequences that are hard to handle. Instead
split it into a separate function that can be used in the cases
where only relative time is desired.
On platform where no monotonic clock is available, the difference
between the two av_gettime functions is not clear, and one could
mistakenly use the relative clock where an absolute one is
required. Therefore add an offset, to make it evident that the
time returned from av_gettime_relative never is actual current
real time, even though it is based on av_gettime.
Based on a patch by Olivier Langlois.
Signed-off-by: Martin Storsjö <martin@martin.st>
The colon after the localtime function call needs an additional layer of
escaping or else everything until the next colon is treated as a
fontfile.
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7ea1b3472a61de4aa4d41b571e99418e4997ad41':
lavc: deprecate the use of AVCodecContext.time_base for decoding
Conflicts:
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/mpegvideo_parser.c
libavcodec/utils.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When decoding, this field holds the inverse of the framerate that can be
written in the headers for some codecs. Using a field called 'time_base'
for this is very misleading, as there are no timestamps associated with
it. Furthermore, this field is used for a very different purpose during
encoding.
Add a new field, called 'framerate', to replace the use of time_base for
decoding.
Decoding acceleration may work even if the codec level is higher than
the stated limit of the VDPAU driver. Or the problem may be considered
acceptable by the user. This flag allows skipping the codec level
capability checks and proceed with decoding.
Applications should obviously not set this flag by default, but only if
the user explicitly requested this behavior (and presumably knows how
to turn it back off if it fails).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '2df0c32ea12ddfa72ba88309812bfb13b674130f':
lavc: use a separate field for exporting audio encoder padding
Conflicts:
libavcodec/audio_frame_queue.c
libavcodec/avcodec.h
libavcodec/libvorbisenc.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/wmaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently, the amount of padding inserted at the beginning by some audio
encoders, is exported through AVCodecContext.delay. However
- the term 'delay' is heavily overloaded and can have multiple different
meanings even in the case of audio encoding.
- this field has entirely different meanings, depending on whether the
codec context is used for encoding or decoding (and has yet another
different meaning for video), preventing generic handling of the codec
context.
Therefore, add a new field -- AVCodecContext.initial_padding. It could
conceivably be used for decoding as well at a later point.
Adds output of chroma sub-sampling information to
ffprobe -show_pixel_formats option.
Note: This patch just prints the "raw" log2_charoma_w/h values instead
of the previously suggested mapping into a chroma sub-sampling pattern
string like "4:2:2".
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Adds option -show_pixel_formats to ffprobe which lists all
available pixel formats with some details.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This function provides an explicit VDPAU device and VDPAU driver to
libavcodec, so that the application is relieved from codec specifics
and VdpDevice life cycle management.
A stub flags parameter is added for future extension. For instance, it
could be used to ignore codec level capabilities (if someone feels
dangerous).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The -hls_allow_cache parameter enables explicitly setting the
EXT-X-ALLOW-CACHE tag in the manifest file. That tag indicates
whether the client MAY or MUST NOT cache downloaded media
segments for later replay.
Valid values are 1 (=YES) or 0 (=NO) and the EXT-X-ALLOW-CACHE
will not show in the manifest for other values (or if
-hls_allow_cache is not used.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add CODEC_FLAG2_SKIP_MANUAL (exposed as "skip_manual"), which makes
the decoder export sample skip information via side data, instead
of applying it automatically. The format of the side data is the
same as AV_PKT_DATA_SKIP_SAMPLES, but since AVPacket and AVFrame
side data constants overlap, AV_FRAME_DATA_SKIP_SAMPLES needs to
be introduced.
This is useful for applications which want to do the timestamp
calculations manually, or which actually want to retrieve the
padding.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The -hls_allow_cache parameter enables explicitly setting the
EXT-X-ALLOW-CACHE tag in the manifest file. That tag indicates
whether the client MAY or MUST NOT cache downloaded media
segments for later replay.
Valid values are 1 (=YES) or 0 (=NO) and the EXT-X-ALLOW-CACHE
will not show in the manifest for other values (or if
-hls_allow_cache is not used.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Radial gradient by Víctor Paesa. Linear gradient by Paul Gentemann.
Also-by: Víctor Paesa <victorpaesa@googlemail.com>
Also-by: Paul Gentemann <beriukay@gmail.com>
Signed-off-by: Lou Logan <lou@lrcd.com>
This adds a new option -hls_flags single_file that creates one .ts file
for HLS and adds byteranges to the .m3u8 file, instead of creating one
.ts file for each segment.
This is helpful at least for storing large number of videos, as the
number of files per video is drastically reduced and copying and storing
those files takes less requests and inodes.
This is based on work by Nicolas Martyanoff, discussed on ffmpeg-devel
in July 2014. That patch seems abandoned by the author, and contained
unrelated changes. This patch tries to add the minimum amount of code to
support the byterange playlists.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It gets rendered inline in HTML and becomes not very clear.
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '775a0b04f0cf8102fe322b2ee03fe1a0633dea04':
doc: Fix syntax and logical errors in avconv stream combination example
Conflicts:
doc/ffmpeg.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '041caf1a63f091745b95a6d51c23fbdcb604d4ce':
avplay: Exit by default at the end of playback
Conflicts:
Changelog
ffplay.c
Changes to ffplay not merged as they would break -autoexit as a way to override -noautoexit,
the change of the default will be implemented in the next commit
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Make time duration references consistent, using @ref links, and
eliminate incorrect syntax [-]HH[:MM[:SS[.m...]]].
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
* commit '94f084324e648876508bed546d950762f10b875e':
texi2pod: Make it output a single encoding string
Conflicts:
doc/texi2pod.pl
See: 12ce58bebd
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b263f8ffe7599d9cd27ec477a12700da8eb2790d':
lavf: add AVFormatContext.max_ts_probe
Conflicts:
doc/APIchanges
libavformat/avformat.h
libavformat/utils.c
libavformat/version.h
lavf-fate/mp3 changes as the estimated input bitrate changes and that is
copied to the output
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6ca11f7157d0ffd11ea9a4211b04981b46dc75d6':
doc/APIchanges: fill in missing hashes and dates
Conflicts:
doc/APIchanges
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Unfortunately this was not explicitly documented and thus
might be risky.
But all uses I could find in FFmpeg and one in VLC had a memleak
in these cases, and I could not find any that relied on the previous
behaviour.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The reasoning behind this addition is that various third party
applications are interested in getting some motion information out of a
video "for free" when it is available.
It was considered to export other information as well (such as the intra
information about the block, or the quantization) but the structure
might have ended up into a half full-generic, half full of codec
specific cruft. If more information is necessary, it should either be
added in the "flags" field of the AVMotionVector structure, or in
another side-data.
This commit also includes an example exporting them in a CSV stream.
Based on commit fb1ddcdc8f by Luca Barbato <lu_zero@gentoo.org>
Adapted for libswresample by Michael Niedermayer
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows getting rid of the many, slightly differing, implementations
of basically the same thing.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* commit 'afbd4b7e093adf6d7a830b32759ca3ba8500363d':
lavf: add AVFormatContext/AVStream fields for signaling to the user when events happen.
Conflicts:
libavformat/avformat.h
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In order to support metadata being set as an option, it's necessary to be able
to set dictionaries as values.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The only flags, for now, indicate if metadata was updated and are set after each call to
av_read_frame(). This comes with the caveat that, on stream start, it might not be set properly
as packets might be buffered in AVFormatContext.packet_buffer before being given to the user
in av_read_frame().
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Add a tlength option with frequency and timeclamp variable
Add to the volume option support for frequency and timeclamp variable,
a_weighting, b_weighting and c_weighting functions
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It's a public function and should use the avio_ namespace
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
8x8 is about 5x faster than 16x16 on 1080p input. Since a block size of
8x8 makes the filter almost usable (time wise) and it's not obvious if
8x8 or 16x16 is better from a quality PoV (it really depends on the
input and parameters), the filter now defaults to 8x8, and as a result
libavfilter is micro bumped.
It allows attaching other external, opaque data to the frame and passing it
through the reordering process, for cases when the caller wants other data
than just the plain packet pts. There is no way to cleanly achieve this
without the field.
The rationale is that you have a packed format in form
<greyscale sample> <alpha sample> <greyscale sample> <alpha sample>
and shortening greyscale to 'G' might make one thing about Greenscale instead.
An alias pixel format and color space name are provided for compatibility.
* commit '69e7336b8e16ee65226fc20381baf537f4b125e6':
avstring: Expose the simple name match function
Conflicts:
libavutil/avstring.c
libavutil/avstring.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c5fca0174db9ed45be821177f49bd9633152704d':
lavc: add a property for marking codecs that support frame reordering
Conflicts:
doc/APIchanges
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This provides a public sustainable API/ABI for DCT functions.
Only externally used dct functions are included.
The structure is extensible without ABI issues compared to the
existing dct contexts.
See Mailing list and IRC log of 2014-07-26/27
Reviewed-by: ubitux
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '884f7c975f0af25febe86660e87bf3b2165a0309':
output example: set the stream timebase
Conflicts:
doc/examples/muxing.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bb0babd7054bed7edfd9f4d6b20cdba864de1830':
build: Support executable only ldflags
Conflicts:
Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It evaluates expression and outputs it as integer value, using specified
format.
Address trac ticket #3699.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Make the segment muxer keep segment_list_size segments instead of
segment_list_size + 1 segments. This patch also changes the
documentation for segment_list_size to reduce possible confusion over
how many segments are kept.
this allows the segment list to
be limited to containing only one segment which used to be impossible
because a segment_list_size of 0 kept all the segments and a
segment_list_size of 1 kept 2 segments.
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds the ability to generate WebM DASH manifest XML using
ffmpeg. A sample command line would be as follows:
ffmpeg \
-f webm_dash_manifest -i video1.webm \
-f webm_dash_manifest -i video2.webm \
-f webm_dash_manifest -i audio1.webm \
-f webm_dash_manifest -i audio2.webm \
-map 0 -map 1 -map 2 -map 3 \
-c copy \
-f webm_dash_manifest \
-adaptation_sets “id=0,streams=0,1 id=1,streams=2,3” \
manifest.xml
It works by exporting necessary fields as metadata tags in matroskadec
and use those values to write the appropriate XML fields as per the WebM
DASH Specification [1]. Some ideas are adopted from webm-tools project
[2].
[1]
https://sites.google.com/a/webmproject.org/wiki/adaptive-streaming/webm-dash-specification
[2]
https://chromium.googlesource.com/webm/webm-tools/+/master/webm_dash_manifest/
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The AVStream.parser field is considered private and its location cannot be
preserved while preserving also ABI compatibility to libav, as libav added fields
before it.
Some tools like ffmpeg.c access this field though
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f6ee61fb05482c617f5deee29a190d8ff483b3d1':
lavc: export DV profile API used by muxer/demuxer as public
Conflicts:
configure
doc/APIchanges
libavcodec/Makefile
libavcodec/dv_profile.c
libavcodec/dv_profile.h
libavcodec/version.h
libavformat/dvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts a hunk from 671005558a
Reduces diff to what we use on the server
Suggested-by: Timothy Gu
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f134b5ec53b4cb51cb69bf0c64de87687ea72b12':
apichanges: fill in changes for lavu 51.19 and 51.20
Conflicts:
doc/APIchanges
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a7fcd4122b19b0f934020f4e261d0c44c4c32e11':
output example: store the scaling context in the stream context
Conflicts:
doc/examples/muxing.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6a927d7aaf5625e83a674072913b9e292a303fd1':
output example: use a macro instead of a static variable
Conflicts:
doc/examples/muxing.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '63fd0d866c8300a8f251a15b1535e9ce40a407fb':
output example: allocate the audio frame only once
Conflicts:
doc/examples/muxing.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'edd5f957646dcbf1bb55718bc7bf1e5481c25bcb':
output example: use OutputStream for audio streams as well
Conflicts:
doc/examples/muxing.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5e7b125b6ae36893dfd9cb5661c99b67363cbb38':
output example: use the new AVFrame API to allocate audio frames
Conflicts:
doc/examples/muxing.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '294daf71a7a1303b5ddd3cbefebed3b732d610f3':
output example: use a struct to bundle the video stream variables together
Conflicts:
doc/examples/muxing.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '38d044429dabcd28928693240e955c6d4430cca9':
output example: use the new AVFrame API for allocating the video frame
Conflicts:
doc/examples/muxing.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '463a7cde563fd805864c48a76dd1b03fc24671ed':
Differentiate assembler and assembly in documentation and comments
Conflicts:
configure
doc/platform.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9e500efdbe0deeff1602500ebc229a0a6b6bb1a2':
Add av_image_check_sar() and use it to validate SAR
Conflicts:
libavcodec/dpx.c
libavcodec/dvdec.c
libavcodec/ffv1dec.c
libavcodec/utils.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '452860d7e056f9a894cac2fe52cdedeae4c38251':
Use av_packet_rescale_ts() to simplify code.
Conflicts:
doc/examples/muxing.c
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '874390e163427c1fe7682ab27924a7843780dbb3':
lavc: add a convenience function for rescaling timestamps in a packet
Conflicts:
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It hasn't been used since 0.11, and it does not contain any useful
information except for the code name.
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '194be1f43ea391eb986732707435176e579265aa':
lavf: switch to AVStream.time_base as the hint for the muxer timebase
Conflicts:
doc/APIchanges
libavformat/filmstripenc.c
libavformat/movenc.c
libavformat/mxfenc.c
libavformat/oggenc.c
libavformat/swf.h
libavformat/version.h
tests/ref/lavf/mkv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously, AVStream.codec.time_base was used for that purpose, which
was quite confusing for the callers. This change also opens the path for
removing AVStream.codec.
The change in the lavf-mkv test is due to the native timebase (1/1000)
being used instead of the default one (1/90000), so the packets are now
sent to the crc muxer in the same order in which they are demuxed
(previously some of them got reordered because of inexact timestamp
conversion).
